IMPACCT: Methodology and Tools for Power-Aware Embedded Systems

Power-aware systems are those that must exploit a widerange of power/performance trade-offs in order to adapt to the power availabilityand application requirements. They require the integration of many novel powermanagement techniques, ranging from voltage scaling to subsystem shutdown.However, those techniques do not always compose synergistically with eachother; in fact, they can combine subtractively and often yield counterintuitive,and sometimes incorrect, results in the context of a complete system. Thiscan become a serious problem as more of these power aware systems are beingdeployed in mission critical applications.To address the problem of technique integration for power-aware embedded systems, we propose a new design tool framework called IMPACCT and the associated design methodology. The system modeling methodology includes application model for capturing timing/powerconstraints and mode dependencies at the system level. The tool performs power-awarescheduling and mode selection to ensure that all timing/power constraintsare satisfied and that all overhead is taken into account. IMPACCT then synthesizesthe implementation targeting a symmetric multiprocessor platform. Experimentalresults show that the increased dynamic range of power/performance settingsenabled a Mars rover to achieve significant acceleration while using lessenergy. More importantly, our tool correctly combines the state-of-the-arttechniques at the system level, thereby saving even experienced designersfrom many pitfalls of system-level power management.     

The effect of mischmetal addition on the structure and mechanical properties of a cast Al-7Si-0.3Mg alloy containing excess iron (up to 0.6 Pct)

The effect of Fe content (0.2 to 0.6 pct) on the microstructure and mechanical properties of a cast Al-7Si-0.3Mg (LM 25/356) alloy has been investigated. Further, 1 pct mischmetal (MM) additions (a mixture of rare-earth (RE) elements) were made to these alloys, and their mechanical properties at room and at elevated temperatures (up to 200 °C) were evaluated. A structure-property correlation on this alloy was attempted using optical microstructure analysis, fractographs, X-ray diffraction, energy-dispersive analysis of X-rays (EDX), and quantitative metallography by image analysis. An increase in Fe content increased the volume percentage of Fe-bearing intermetallic compounds (β and π phases), contributing to the loweryield strength (YS), ultimate tensile strength (UTS), percentage elongation, and higher hardness. An addition of 1 pct MM to the alloys containing 0.2 and 0.6 pct Fe was found to refine the microstructure; modify the eutectic silicon and La, Ce, and Nd present in the MM; form different intermetallic compounds with Al, Si, Fe, and Mg; and improve the mechanical properties of the alloys both at room and elevated temperatures.     

High char‐yielding poly[acrylonitrile‐co‐(itaconic acid)‐co‐(methyl acrylate)]: synthesis and properties

Polyacrylonitrile terpolymers of various compositions consisting of acrylonitrile (AN), itaconic acid (IA) and methyl acrylate (MA) were synthesized by solution polymerization in dimethylsulfoxide. Increase in concentration of either IA or MA retarded the overall polymerization rate and the polymer molecular weight. The system consisting of AN + MA and varying IA concentration was more prone to retardation in comparison with the system composed of AN + IA with variable MA concentration. The retardation factors were quantified. Minor quantities of MA boost the reactivity of IA in the terpolymer system. The terpolymer was richer in MA vis‐à‐vis the feed. The thermal characteristics of the terpolymer were examined as a function of its composition. In contrast to the copolymer of AN and IA requiring 1–1.5 mol% IA, the terpolymer required an IA content of approximately 2.5 mol% for optimum thermal stability. The polymer with 90 mol% AN, 2.5 mol% IA and 7.5 mol% MA exhibited reasonably good char‐forming characteristics and thermal stability. The overall crystallinity and crystallite size of the polymers were found to decrease on incorporation of the comonomers. The ‘aromatization index’ of the copolymer increased with the temperature of pyrolysis through re‐organization of the tetrahydropyridine ladder structure. Copyright © 2005 Society of Chemical Industry     

Pedestrian detection and tracking at crossroads

This paper presents a system that can perform pedestrian detection and tracking using vision-based techniques. A very important issue in the field of intelligent transportation system is to prevent pedestrians from being hit by vehicles. Recently, a great number of vision-based techniques have been proposed for this purpose. In this paper, we propose a vision-based method, which combines the use of a pedestrian model as well as the walking rhythm of pedestrians to detect and track walking pedestrians. Through integrating some spatial and temporal information grabbed by a vision system, we are able to develop a reliable system that can be used to prevent traffic accidents happened at crossroads. In addition, the proposed system can deal with the occlusion problem. Experimental results obtained by executing some real world cases have demonstrated that the proposed system is indeed superb.     

Triggering of cellulase biosynthesis by cellulose in Trichoderma reesei. Involvement of a constitutive, sophorose-inducible, glucose-inhibited beta-diglucoside permease

We prepared [U-14C]cellobiose by cultivating Acetobacter pasteurianus in the presence of [U-14C]glucose and hydrolyzing the [U-14C]cellulose formed with beta-glucosidase-free cellulase from Trichoderma reesei. This 14C-labeled cellobiose was used to investigate the presence of an uptake system for cellobiose in T. reesei. Evidence was obtained for the presence of a high affinity (Km for cellobiose 0.3 microM) but low activity (2.5 milliunits/mg fungal dry weight) cellobiose permease. The permease is formed constitutively, but higher levels are formed after addition of sophorose (glucosyl-beta-1,2-diglucoside), a reputed cellulase inducer. The permease appears to be specific for beta-diglucosides, as the uptake of [U-14C]cellobiose is inhibited by sophorose, gentiobiose (glucosyl-beta-1,3-glucoside), and cellobiose. Under these conditions, cellooligodextrines (n, 4-7; final concentration, 1 mM) are not inhibitors. Glucose, but no other monosaccharides, inhibits the permease. The hypersecretory mutant T. reesei RUT C-30 exhibits elevated permease activities, whereas in T. reesei QM 9979, a mutant strain defective in the induction of cellulases by cellulose or sophorose, strongly reduced permease activities were demonstrated. The results stress a hitherto not recognized point of control in the induction of cellulases by T. reesei at the level of uptake of cellulose oligosaccharides.     

Genetic mapping of a major susceptibility locus for juvenile myoclonic epilepsy on chromosome 15q

The epilepsies are a group of disorders characterised by recurrent seizures caused by episodes of abnormal neuronal hyperexcitability involving the brain. Up to 60 million people are affected worldwide and genetic factors may contribute to the aetiology in up to 40% of patients. The most common human genetic epilepsies display a complex pattern of inheritance. These are categorised as idiopathic in the absence of detectable structural or metabolic abnormalities. Juvenile myoclonic epilepsy (JME) is a distinctive and common variety of familial idiopathic generalised epilepsy (IGE) with a prevalence of 0.5-1.0 per 1000 and a ratio of sibling risk to population prevalence (lambda(s)) of 42. The molecular genetic basis of these familial idiopathic epilepsies is entirely unknown, but a mutation in the gene CHRNA4, encoding the alpha4 subunit of the neuronal nicotinic acetylcholine receptor (nAChR), was recently identified in a rare Mendelian variety of idiopathic epilepsy. Chromosomal regions harbouring genes for nAChR subunits were therefore tested for linkage to the JME trait in 34 pedigrees. Significant evidence for linkage with heterogeneity was found to polymorphic loci encompassing the region in which the gene encoding the alpha7 subunit of nAChR (CHRNA7) maps on chromosome 15q14 (HLOD = 4.4 at alpha = 0.65; Z(all) = 2.94, P = 0.0005). This major locus contributes to genetic susceptibility to JME in a majority of the families studied.     

Constitutive expression in gal7 mutants of Kluyveromyces lactis is due to internal production of galactose as an inducer of the Gal/Lac regulon

The induction process of the galactose regulon has been intensively studied, but until now the nature of the inducer has remained unknown. We have analyzed a delta gal7 mutant of the yeast Kluyveromyces lactis, which lacks the galactotransferase activity and is able to express the genes of the Gal/Lac regulon also in the absence of galactose. We found that this expression is semiconstitutive and undergoes a strong induction during the stationary phase. The gal1-209 mutant, which has a reduced kinase activity but retains its positive regulatory function, also shows a constitutive expression of beta-galactosidase, suggesting that galactose is the inducer. A gal10 deletion in delta gal7 or gal1-209 mutants reduces the expression to under wild-type levels. The presence of the inducer could be demonstrated in both delta gal7 crude extracts and culture medium by means of a bioassay using the induction in gal1-209 cells. A mutation in the transporter gene LAC12 decreases the level of induction in gal7 cells, indicating that galactose is partly released into the medium and then retransported into the cells. Nuclear magnetic resonance analysis of crude extracts from delta gal7 cells revealed the presence of 50 microM galactose. We conclude that galactose is the inducer of the Gal/Lac regulon and is produced via UDP-galactose through a yet-unknown pathway.     

Oncological outcomes of operative treatment of subcutaneous soft-tissue sarcomas of the extremities

We reviewed the cases of sixty-two patients who had had a subcutaneous sarcoma to determine the effect of tumor and treatment-related variables on the rates of survival and local recurrence. Fifty-nine (95 per cent) of the patients had had an operation at another hospital before being referred to us. Twenty-nine (47 per cent) of the sixty-two tumors were high-grade, forty-two (68 per cent) were small (five centimeters or less), and thirty (48 per cent) were malignant fibrous histiocytomas. We followed a treatment strategy that consisted of repeat excision with the goal of obtaining wide margins. Excluding thirteen patients who had had a palpable local recurrence at the time of presentation, twenty (49 per cent) of forty-one patients who had had a marginal excision at another hospital had microscopic residual tumor on repeat excision. At a median of fifty-six months after the repeat excision, fifty (81 per cent) of the sixty-two patients had been continuously disease-free, one had no evidence of disease, eight had died of the disease, and three had died of other causes. The five-year rate of disease-free survival was 85 per cent (fifty-three of sixty-two patients). There were three local recurrences, all in patients who had had a marginal resection. No recurrences were noted in patients who had had a wide local excision of the tumor or of the previous operative field. Multivariate analysis revealed that a large tumor (greater than five centimeters), a marginal excision, and adjuvant radiation therapy were associated with a worse prognosis. Excellent rates of survival for patients who have a subcutaneous sarcoma, including those who have a large or high-grade tumor and those who have residual tumor following a previous operation, can be obtained with carefully planned operative treatment alone. We recommend operative excision or repeat excision with wide margins because of the high prevalence of residual tumor. Size is the most important tumor-related factor, and the operative margin is the most important treatment-related factor. The additional value of adjuvant radiation therapy remains unproved.     

Acromioclavicular joint cyst and rotator cuff tear

The role of a depressor factor, atrial natriuretic peptide, in the development of arterial hypertension in adolescents with pubertal hypothalamic syndrome was studied in 52 patients and 13 healthy males aged 13-24 years. The duration of disease was 2-11 years. Radioimmunological methods were used to measure plasma atrial natriuretic peptide, plasma renin activity, and serum aldosterone. Patients with borderline arterial hypertension were found to have a significant reduction in their atrial natriuretic peptide levels, and this correlated directly with the renin-aldosterone system, demonstrating insufficiency of the depressor system in patients with pubertal hypothalamic syndrome and the involvement of atrial natriuretic peptide in the development of arterial hypertension, along with disturbances in the functional relationship between atrial natriuretic peptide and the renin-aldosterone system.