Mixed waste ferrite as a novel sorbent for carbon dioxide derived from flue gases

Ferrite is a potential sorbent for flue gases such as CO₂, H₂S and SO₂. This paper discusses the adsorption and decomposition of CO₂ into carbon by hydrogen-activated waste ferrites prepared from Berkeley Pit acid mine water (Butte, MT). The decomposition effectiveness of these waste ferrites was studied at 300 °C and compared with the synthetic magnetite obtained from ferrous sulfate solution in our laboratory. The decomposition was measured by two methods: indirectly by measuring the adsorption rate of CO₂ and directly by analysing the carbon deposited on the samples. The results indicated that the mixed waste ferrite had good affinity for the adsorption and decomposition. The CO₂ decomposition data of both sorbents fitted the first-order reaction kinetics. Even though the surface area of the magnetite was higher than that of waste ferrite, the CO₂ decomposition rate of the waste ferrite was estimated to be 2.5 times higher than that of magnetite under identical conditions. The carbon analysis deposited on the sample indicated that the CO₂ was 100% decomposed into carbon and other carbon/hydrogen compounds by the waste ferrite, whereas the conversion was 43% by the magnetite. In terms of specific adsorption of carbon, ferrite was three to five times more efficient than magnetite.     

Simulation and optimization of tool-life in manufacturing centers

This paper presents the development of an optimization and a computer-simulation model to evaluate the process plans of a manufacturing center by analyzing the effect of tool failure on system performance. The GPSS/PC simulation program that is used in this study has been built with variables, functions and matrices so that many experiments could be conducted with the model. Sensitivity analysis is presented and the developed model has proven to be useful in determining optimum sequencing of parts for various operating policies.     

High-power 1320-nm wafer-bonded VCSELs with tunnel junctions

A new long-wavelength vertical-cavity surface-emitting laser structure is described that utilizes AlGaAs-GaAs mirrors bonded to AlInGaAs-InP quantum wells with an intracavity buried tunnel junction. This structure offers complete wavelength flexibility in the 1250-1650 nm fiber communication bands and reduces the high free-carrier losses and bonded junction voltage drops in previous devices. The intracavity contacts electrically bypass the bonded junctions to reduce threshold voltage. N-type current spreading layers and undoped AlGaAs mirrors minimize optical losses. This has enabled 134/spl deg/C maximum continuous-wave lasing temperature, 2-mW room-temperature continuous-wave single-mode power, and 1-mW single-mode power at 80/spl deg/C, in various devices in the 1310-1340 nm wavelength range.     

Polyaniline-multiwalled carbon nanotube composites: Characterization by WAXS and TGA

Polyaniline/carboxylated multi-walled carbon nanotube (PAni/c-MWNT) nanocomposites have been synthesized by micellar aided emulsion polymerization with various c-MWNTs compositions, viz., 0.5, 1, 5, and 10 wt %. The microcrystalline parameters such as the nanocrystal size (〈N〉), lattice strain (g), interplanar distance (d_hkl), width of the crystallite size distribution, surface weighted crystal size (D_s), and volume of the ordered regions were calculated from the X-ray data by using two mathematical models, namely the Exponential distribution and Reinhold distribution methods. The effects of heat ageing on the microcrystalline parameters of the PAni/c-MWNT nanocomposites were also studied and the results are correlated. The thermal stability and electrical resistivity of the PAni/c-MWNT nanocomposites were examined with thermogravimetric analysis (TGA) and a conventional two-probe method. The TGA data indicate that the thermal stability of the nanocomposites improved after the incorporation of c-MWNTs. The influence of temperature on the resistivity of the nanocomposites was also measured. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Thermal Performance Analysis of Highly Reflective Coating on Residences in Hot and Arid Climates

A 1-D transient model (RESHEAT), developed by the writers, was used to study the thermal performance of a highly reflective paint applied sequentially to the outer walls and roof of a simulated residence in a hot and arid region of the southwestern United States. The model uses climatological inputs from a file that includes hourly data on ambient temperatures, insolation, cloud cover, and so on, at the particular location. The model focuses particularly on the potential cooling load reduction due to the reduced heat pickup from the inside attic surfaces to the outer surfaces of the supply duct. This simulation showed that a reduction of 33.6% (cooling load) on the average is achieved over the base case where no reflective paint is used when the outer surface of the roof and walls are painted. Alternatively, only a 11% reduction would be achieved if the reflective paint is applied only to the roof. Savings of $42 per month are conservatively estimated from calculations made when applying this technology to a typical residence (roof and walls) equipped with a 4 ton refrigeration unit in the Southwest.     

A micromachined electrochemical sensor for free chlorine monitoring in drinking water.

In this work, we designed, fabricated and tested a disposable, flow-through amperometric sensor for free chlorine determination in water. The sensor is based on the principle of an electrochemical cell. The substrate, as well as the top microfluidic layer, is made up of a polymer material. The advantages include; (a) disposability from low cost; (b) stable operation range from three-electrode design; (c) fluidic interconnections that provide on line testing capabilities; and (d) transparent substrate which provides for future integration of on-chip optics. The sensor showed a good response and linearity in the chlorine concentration ranging from 0.3 to 1.6 ppm, which applies to common chlorination process for drinking water purification.     

A graded diameter and oriented nanorod–thin film structure for solar cell application: a device proposal

This paper presents a device proposal based on a junction between an absorbing semiconductor nanorod structure and another window semiconductor layer for solar cell application. The possibility of band gap tuning by varying the diameter of the nanorods along the length, higher absorption coefficient at nanodimensions, the presence of a strong electrical field at the nanorod-window semiconductor nanojunctions and the carrier confinement in lateral direction are expected to result in enhanced absorption and collection efficiency in the proposed device. Process steps, feasibility, technological tasks needed for the realization of the proposed structure and the novelty of the present structure in comparison to the already reported nanostructured solar cells are also discussed.     

Potential bioreductively activated hypoxia probes and post-irradiation radiosensitizers related to NITP

NITP (1) is an effective marker of hypoxia in tumours for both microscopy and cell sorting studies and, additionally, the compound shows post-irradiation sensitization, probably by inhibition of repair of radiation damage to DNA. However, NITP does not have the substitution pattern which the immunochemical reagents are raised to recognize and the compound has very low solubility in water. We report the synthesis of an isomer (13) of NITP which has the desirable substitution pattern and is also soluble in very weak aqueous base. The successful synthesis of 13 uses a nitrosation and cyclization of a substituted uracil (16), but earlier approaches from 5 and 12 yielded the pyridoxanthine derivative 6. The preparative use of nitro group displacement reactions from 8-nitrocaffeine is shown to be a useful entry to a range of 8-substituted caffeines and is utilized to obtain two derivatives of NITP which carry aliphatic amine chains, i.e. 34 and 35.