Electrochemical mass transfer between an impinging jet and a rotating disk in a confined system

This paper presents the mass transfer results from an impinging liquid jet to a rotating disk. The mass transfer coefficients were measured using the electrochemical limiting diffusion current technique (ELDCT). Rotational Reynolds number (Re_r) in the range of 3.4 × 10⁴–1.2 × 10⁵, jet Reynolds number (Re_j) 1.7 × 10⁴–5.3 × 10⁴ and non-dimensional jet-to-disk spacing (H/d) 2–8 were taken into consideration as parameters. It was found that the jet impingement resulted in a substantial enhancement in the mass transfer compared to the case of the rotating disk without jet.     

A combo technology of autotrophic and heterotrophic denitrification processes for groundwater treatment

In this study,a sequential process (heterotrophic up-flow column and completely mixed membrane bioreactors) was proposed combining advantages of the both processes.The system was operated for 249 days with simulated and real groundwater for nitrate removal at concentrations varying from 25 to 145 mg·L-1 NO3-N.The contribution of heterotrophic process to total nitrate removal in the system was controlled by dozing the ethanol considering the nitrate concentration.By this way,sulfur based autotrophic denitrification rate was decreased and the effluent sulfate concentrations were controlled.The alkalinity requirement in the autotrophic process was produced in the heterotrophic reactor,and the system was operated without alkalinity supplementation.Throughout the study,the chemical oxygen demand in the heterotrophic reactor effluent was (23.7 ± 22) mg·L-1 and it was further decreased to(7.5 ± 7.2) mg·L-1 in the system effluent,corresponding to a 70％ reduction.In the last period of the study,the real groundwater containing 145 mg·L-1 NO3-N was completely removed.Membrane was operated without chemical washing in the first 114 days.Between days 115-249 weekly chemical washing was required.     

Fair referee assignments for professional football leagues

Assignment of referees to football games is an important problem faced in professional football leagues. Despite its importance, the problem has received limited academic attention. This paper presents a model and analysis of the problem for fair referee assignments, and develops a constructive heuristic and a local search procedure for its solution. Results from an extensive computational study show that the methods are effective in solving the problem in a second of computation time and yielding an excellent solution quality.     

Classification rule discovery for the aviation incidents resulted in fatality

Data mining methods have been successfully applied to different fields. Aviation industry is one of them. There is a large amount of knowledge and data accumulation in aviation industry. These data could be stored in the form of pilot reports, maintenance reports, incident reports or delay reports. This paper explains the data mining application on the incident reports of the Federal Aviation Administration (FAA) Accident/Incident Data System database, contains incident data records for all categories of civil aviation between the years of 2000 and 2006. In this study, we applied data mining methods on the incident reports. Moreover rough sets concept is used to reduce the attributes of data set. The purpose of this application is to find out the effective attributes in order to reduce the number of the fatality in the incidents. The categorization tools and decision trees are used to find the relations and rules about the incidents resulted in fatality. For this purpose data-mining analysis is conducted. As a result some rules about the fatality are obtained and also the parameters that affect the fatality in the incident have determined. The rules found are tested in terms of their accuracy and reliability, and these results are seen to be meaningful.     

Maximization of buckling load of laminated composite plates with central circular holes using MFD method

This paper addresses optimal design of simply supported symmetrically laminated composite plates with central circular holes. The design objective is the maximization of the buckling load, and the design variable is considered as the fiber orientation. The first-order shear deformation theory is used for the finite element analysis. The study is complicated because the effects of bending–twisting coupling are also included for the buckling optimization. The modified feasible direction method is used to solve the optimization problems. Finally, the effect of different number of layers, boundary conditions, width-to-thickness ratio, plate aspect ratios, hole daimeter-to-width ratio, and load ratios on the results is investigated.     

Standardization problem of author affiliations in citation indexes

Academic effectiveness of universities is measured with the number of publications and citations. However, accessing all the publications of a university reveals a challenge related to the mistakes and standardization problems in citation indexes. The main aim of this study is to seek a solution for the unstandardized addresses and publication loss of universities with regard to this problem. To achieve this, all Turkey-addressed publications published between 1928 and 2009 were analyzed and evaluated deeply. The results show that the main mistakes are based on character or spelling, indexing and translation errors. Mentioned errors effect international visibility of universities negatively, make bibliometric studies based on affiliations unreliable and reveal incorrect university rankings. To inhibit these negative effects, an algorithm was created with finite state technique by using Nooj Transducer. Frequently used 47 different affiliation variations for Hacettepe University apart from “Hacettepe Univ” and “Univ Hacettepe” were determined by the help of finite state grammar graphs. In conclusion, this study presents some reasons of the inconsistencies for university rankings. It is suggested that, mistakes and standardization issues should be considered by librarians, authors, editors, policy makers and managers to be able to solve these problems.     

Are Propositional Attitudes Mental States?

Minds and Machines - I present an argument that propositional attitudes are not mental states. In a nutshell, the argument is that if propositional attitudes are mental states, then only minded...     

Martensitic phase transformations in Ni–Ti-based shape memory alloys: The Landau theory

We present a simple Landau free energy functional for cubic-to-orthorhombic and cubic-to-monoclinic martensitic phase transformations. The functional is derived following group–subgroup relations between different martensitic phases – tetragonal, trigonal, orthorhombic and monoclinic – in order to fully capture the symmetry properties of the free energy of the austenite and martensite phases. The derived free energy functional is fitted to the elastic and thermodynamic properties of NiTi and NiTiCu shape memory alloys which exhibit cubic-to-monoclinic and cubic-to-orthorhombic martensitic phase transformations, respectively.     

Characterization of nanocrystalline Ni–Cu thin films electrodeposited onto ITO coated glass substrates: effect of pretreatment current density

In this work, Ni–Cu films were grown onto indium tin oxide coated glass substrates without and with galvanostatic pretreatment process at different current densities. In all cases, Ni–Cu films were electrodeposited at a constant deposition potential of ?1,800 mV versus saturated calomel electrode. After that, the surface morphology and structural properties of electrodeposited Ni–Cu films in dependence of pretreatment current density were studied. X-ray diffraction analysis showed that all films have face-centered cubic structure and consist of segregated two Ni-rich and Cu-rich phases regardless of pretreatment current density. The compositional analysis carried out by energy dispersive X-ray spectroscopy revealed that all films contain almost 90 wt% Ni and 10 wt% Cu. The average crystallite size decreased with decreasing pretreatment current density towards more negative values without inducing significant changes in the composition of the films. It was found that the preferred orientation of all films is in the [111] direction regardless of pretreatment current density. The effect of galvanostatic pretreatment process on the surface morphology investigated using a scanning electron microscopy and an atomic force microcopy were also discussed by means of obtained results.     

Synthesis of hydroxyapatite crystals using carboxymethyl inulin for use as a delivery of ibuprofen

In the present study biodegradable, environmentally friendly polysaccharide-based polycarboxylate, carboxymethyl inulin (CMI), was used to produce hydroxyapatite (HAP) particles by wet chemical synthesis under controlled temperature, pH, and atmospheric conditions. The morphology and microstructure of the HAP nanoparticles were investigated by XRD, SEM, DTA–TGA and FTIR. CMI affects morphology, surface area, dimension and particle size distribution of the crystals. The reduction in size is greater in the direction of the c-axis. The increase in the polymer concentration to 7.5 g/L resulted in the mixture of nanoparticles with particle sizes of less than 100 nm. The SEM micrograph shows the formation of well-crystallized, agglomerated small particles of HAP. X-ray analysis has shown that the resulting particles have high thermal stability.The obtained crystals were used to produce tablets by direct compression of HAP. The influence of sample's CMI concentration on drug release profiles was investigated by using ibuprofen (C₁₃H₁₈O₂) as a model drug. The model was used to determine the effective diffusion coefficient of the drug from the tablets. A good agreement between experimental data and model predictions was obtained as calculated in the present work. The values of the diffusion coefficients range from 1.62 × 10^? 7 to 4.72 × 10^? 7 m² h^? 1.