细粒分级水力旋流器及其网络的设计与模拟

利用建立的三函为数对称通解的转换定理，系统地构造出了一系统二函数轴对称通解，本文的方法是由作者前所提出的三维通解方法演变而来，故它可沟通从三维弹性力学通解蜕化成二函数轴对称通解的渠道，并将整个弹性力学位移通解（三维和二维）融合于一体之中，所论及的通解都是完备的，不以子午面单连通或ｚ向凸的条件为前提。     

Nonmonotonic behavior of the maximum collapse pressure in a cavitation bubble

Calculations which are relevant to the determination of the maximum collapse pressure generated inside a microbubble as a function of peak pressure in the driving ultrasonic pulse are presented. It is found that above the threshold for transient cavitation, the maximum collapse pressure has a nonmonotonic variation. This result is explained on the basis of phase differences between the external applied acoustic pulse and the resulting bubble response.     

A Realistic Computer-Simulated Brain Phantom for Evaluation of PET Charactenstics

To evaluate accurately the imaging characteristics of positron emission tomography (PET), a realistic computer-simulated brain phantom was developed. A cross-sectional slice from a human cadaver brain was chosen for its combination of gray matter, white matter, and cerebrospinal fluid (CSF) regions. The slice was photographed and digitized into a gray-level image with a video digitizer, boundary edges were located around cerebral structures in the digitized image, and each structural region was assigned a uniform pixel value dependent on both the cerebral parameter (e.g., blood flow, oxygen uptake, metabolic rate) under investigation and the type of structure (gray matter, white matter, CSF). Line integrals through the regions were generated at various angular and transverse positions according to specific physical characteristics (such as detector line-spread function) of a tomographic scanner configuration to create a set of simulated but realistic projection measurements. The set of projection measurements can be processed with any standard reconstruction program to create a tomographic image to reveal the effects of various PET characteristics. Investigations with this computer-simulated brain phantom have demonstrated its usefulness for examining the interrelations among neuroanatomical structure volume, tomographic spatial resolution, partial volume effect, and nonlinear parameter estimation. Transportability of the simulated phantom and the procedure to other medical imaging environments is described, and limitations of this simulation procedure are discussed.     

An investigation of methods of pileup rejection for 2-D array detectors employed in high resolution PET

Two methods of rejecting pileup events in 2-D array detectors used in positron emission tomography (PET) are investigated. Since the methods are based on different physical properties, they were investigated separately and in combination. Method one is based on the fact that valid events in the 2-D array detector occur only in a limited pulseheight range for each detector element, and by rejecting events outside these energy ranges, many of the pileup events can be rejected. Method two is based on the fact that most pileup event pairs have a time differential, which will cause a difference in the shape of the signal which increases the rise time of an integrated signal or the crossover time of a bipolar signal from a shaping amplifier. Method two proved to be somewhat better than method one. However, the ideal system would most likely use both methods simultaneously.     

Experimental measurement of a time-varying optical path difference by the small-aperture beam technique

We discuss the use of time series of the jitter angle of multiple, small-aperture probe beams (the small-aperture beam technique, or SABT) as they emerge from a turbulent, optically active flow-field to quantify the time-varying optical path difference (OPD). The flow field studied is that for the transitionally turbulent region of a two-dimensional heated jet. Techniques to construct a complete time series of instantaneous realizations of the OPD are first applied to a numerically generated flow field and then to an experimental flow field. The SABT sensor's measurement accuracy is assessed, and its application to flow fields that differ from the numerical heated jet is discussed.     

Test-retest reliability of Purdue Pegboard performance in thermoneutral and cold ambient conditions

In the cold, Purdue Pegboard (PP) performance declines. The purpose of this study was to determine if this cold-induced impairment is consistent across days (i.e. test-retest reliability) in 5°C. In thermoneutral air (25°C), 14 men were familiarised to the dominant hand (PPa) and bimanual (PPb) PP tasks. They then experienced two 90-min cold exposures (Day 1, Day 2) while wearing ～1 clo. Bare hands were maintained throughout. Performance on both tasks showed high reliability from day to day (intraclass correlations >0.700) in both thermoneutral and cold conditions. However for both tasks, room temperature performance did not predict performance in the cold (intraclass correlations <0.450). When screening applicants for manual labour in the cold, one must consider that room temperature dexterity does not correlate with dexterity in the cold. It is recommended that a 60-min period of cold exposure be employed to assess manual dexterity in these workers. STATEMENT OF RELEVANCE: This study shows that PP performance in room temperature does not predict performance in the cold but performance in the cold is consistent from day to day. When screening applicants for manual labour in the cold, it is recommended that dexterity tests be conducted in the same ambient conditions.