Microwave-Assisted Reaction Sintering of Bismuth Titanate-Based Ceramics

Bismuth titanate-based ceramics, pure and doped with 5 mol% WO₃, were prepared by reaction-sintering using a microwave oven. High densities, ≥96% of theoretical density were achieved with very short thermal treatments, with soaking time ranging from 5 to 15 min. Relatively small platelet-like grains were formed, and microstructure seemed not to be strongly affected by doping nor soaking time. Electrical measurements were performed and, as expected, a decrease of electrical conductivity was observed in WO₃-doped materials. The results of reaction-sintered samples, both conventional as well as microwave sintered, are compared with those of samples prepared with previously calcined powders and sintered using microwaves as well as a conventional electric furnace.     

Ornament and function

The architects and builders in the past lacked our knowledge concerning fluid dynamics, but they exhibited a deep rooted ability to observe and reflect - thus, different cultures have developed by trial and error. The authors have produced a stimulating analysis which couples the science of fluid dynamics and a sensitive understanding of past cultures. The paper is recommended reading.     

Scene Graph and Frame Update Algorithms for Smooth and Scalable 3D Visualization of Simulated Construction Operations

One of the prime reasons inhibiting the widespread use of discrete-event simulation in construction planning is the absence of appropriate visual communication tools. Visualizing modeled operations in 3D is arguably the best form of communicating the logic and the inner working of simulation models and can be of immense help in establishing the credibility of analyses. New software development technologies emerge at incredible rates that allow engineers and scientists to create novel, domain-specific applications. The authors capitalized on a computer graphics technology based on the concept of the scene graph to design and implement a general-purpose 3D visualization system that is simulation and CAD-software independent. This system, the Dynamic Construction Visualizer, enables realistic visualization of modeled construction operations and the resulting products and can be used in conjunction with a wide variety of simulation tools. This paper describes the scene graph architecture and the frame updating algorithms used in designing the Dynamic Construction Visualizer.     

Implicit and hybrid methods for attribute weighting in multi-attribute decision-making: a review study

Artificial Intelligence Review - Attribute weighting is a task of paramount relevance in multi-attribute decision-making (MADM). Over the years, different approaches have been developed to face...     

Is implementation of continuous improvement possible? An evolutionary model of enablers and inhibitors

The purpose of this article is to present an evolutionary model of the enablers and inhibitors affecting the implementation and sustainability of continuous improvement. With this aim, a qualitative study using the grounded theory was carried out. Interviews were conducted with managers responsible for continuous improvement in first‐tier suppliers in the automotive sector. As a result, two existing lines of research in the continuous improvement literature are synthesized: on one hand, the literature concerning the enablers and barriers associated with continuous improvement sustainability; and on the other, the literature concerning the evolutionary model. © 2011 Wiley Periodicals, Inc.     

A framework for avoiding steganography usage over HTTP

Steganographic techniques allow users to covertly transmit information, hiding the existence of the communication itself. These can be used in several scenarios ranging from evading censorship to discreetly extracting sensitive information from an organization. In this paper, we consider the problem of using steganography through a widely used network protocol (i.e. HTTP). We analyze the steganographic possibilities of HTTP, and propose an active warden model to hinder the usage of covert communication channels. Our framework is meant to be useful in many scenarios. It could be employed to ensure that malicious insiders are not able to use steganography to leak information outside an organization. Furthermore, our model could be used by web servers administrators to ensure that their services are not being abused, for example, as anonymous steganographic mailboxes. Our experiments show that steganographic contents can be successfully eliminated, but that dealing with high payload carriers such as large images may introduce notable delays in the communication process.     

(CO2 + 2‐propanol) mixture as a foaming agent for polystyrene: A simple thermodynamic model for the high pressure VLE‐phase diagrams taking into account the foam vitrification

The equation of state model developed by Lacombe and Sanchez (J Phys Chem 1976, 80, 2352) is used in the form proposed later by Sanchez and Stone (Polymer Blends, Vol. 1: Formulation, 2000; Chapter 2) to correlate experimental vapor‐liquid equilibrium (VLE) data for the three binaries and the ternary systems. Experimental data from the binary systems carbon dioxide‐isopropyl alcohol (CO₂‐IPrOH), isopropyl alcohol‐polystyrene (IPrOH‐PS), and carbon dioxide‐polystyrene (CO₂‐PS) are used to calculate VLE properties for the ternary system CO₂‐IPrOH‐PS. Two‐dimensional VLE‐phase diagrams were calculated and used to describe from a thermodynamic point of view the pressure, volume, and temperature values that characterize a thermoplastic foam evolution process, from the extruder to the foaming die. For different initial mixture CO₂ + IPrOH concentrations, pressure reduction produces liquid foaming until the vitrification curve arrests the final foam volume expansion. The dependence of the vitreous transition with the system CO₂ + IPrOH concentration while foaming is represented by the Chow (Macromolecules 1980, 13, 362) equation. The calculation procedure is proposed as a design tool to reduce the amount of experimental data usually needed as a requirement previous to the design stage. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2663–2671, 2007     

PMMA‐modified divinylester/styrene resins: Phase diagrams and morphologies

Binary and ternary experimental cloud‐point curves (CPCs) for systems formulated with a low molar mass synthesized divinylester (DVE) resin, styrene (St), and poly(methyl methacrylate) (PMMA) were determined. The CPCs results were analyzed with the Flory–Huggins (F‐H) thermodynamic model taking into account the polydispersity of the DVE and PMMA components, to calculate the different binary interaction parameters and their temperature dependences. The St‐DVE system is miscible in all the composition range and down to the crystallization temperature of the St; therefore, the interaction parameter expression reported for a higher molar mass DVE was adapted. The interaction parameters obtained were used to calculate the phase diagrams of the St‐PMMA and the DVE‐PMMA binary systems and that of the St‐DVE‐PMMA ternary system at three different temperatures. Quasiternary phase diagrams show liquid–liquid partial miscibility of the St‐PMMA and DVE‐PMMA pairs. At room temperature, the St‐DVE‐PMMA system is miscible at all compositions. Final morphologies of PMMA‐modified cured St‐DVE materials were generated by polymerization‐induced phase separation (PIPS) mechanism from initial homogeneous mixtures. SEM and TEM micrographs were obtained to analyze the generated final morphologies, which showed a direct correlation with the initial miscibility of the system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4539–4549, 2006