排序方式: 共有10条查询结果,搜索用时 0 毫秒
1
1.
利用陶瓷——金属复合技术提高部件抗冲刷磨蚀寿命 总被引:1,自引:0,他引:1
根据耐磨陶瓷粘贴技术在风机叶轮、水泵、阀门和管道等部件的成功应用经验,提出了陶瓷-金属复合制造技术,分析讨论了该项技术应用于受冲刷磨蚀部件上的可行性及应用前景。 相似文献
2.
耐磨陶瓷在电厂引,排风机上的应用 总被引:2,自引:0,他引:2
利用胶粘剂将耐磨陶瓷粘贴于风机叶轮上,经过2年多的实际运行表明,在170℃工况下,风机叶轮的使用寿命提高了5倍以上。 相似文献
3.
4.
5.
对环氧树脂进行改性外性处理,并加入耐热及防腐,防腐填料,组成双分胶泥状物质,用于电厂烟道除尘器中。1年的运行表明,该材料有优异的耐磨,耐腐性能,预计其使用寿命比原金属材料提高8倍以上,也可用于旋风分离器,球磨机出口等部位。 相似文献
6.
A study has been made of the fatigue crackgrowth in an Al-Li alloy 2091 in 3.5%NaCl solu-tion and at an elevated temperature of 130℃.Theaging and environmental effects on the crackgrowth behaviour were examined.It is shown thatthe fatigue crack growth resistance decreases withaging.The specimen with underaged structuresshows the highest resistance to fatigue crack growthdue to more deflected crack paths and the resultinghigh crack closure levels.As compared to laborato-ry air,both 3.5% NaCl solution and elevated tem-perature of 130℃ cause an increase of near-thresh-old crack growth rates and a decrease of thresholdlevels.The elevated temperature is more effective.The effect of elevated temperature is mainly due tothe precipitate coarsening which results in anenhancement of slip irreversibility.Hydrogenembritttlement is supposed to be responsible for thedegradation of fatigue crack growth resistance in3.5%NaCl solution 相似文献
7.
电弧炉用海绵铁(DRI)炼钢的工业性试验 总被引:1,自引:0,他引:1
随着科学技术的进步,对钢铁产品,特别是特钢产品提出了越来越苛刻的质量要求。就化学成分而言,从一般优质钢到纯净钢、超纯净钢,对常存元素(C、Mn、Si、P、S),残余元素(Ni、Cr、Cu),五害元素(Ph、As、Sn、Sb、Bi)的分量、合量均已隐含提出,参考性提出或明确提出严 相似文献
8.
9.
耐磨陶瓷在电厂风机转子上的应用 总被引:5,自引:1,他引:4
分析了陶瓷片用于耐磨风机叶轮的可行性 ,重点介绍了运转试验情况及在各电厂的应用情况。得出了效果良好的结论 相似文献
10.
西柏坡电厂锅炉水冷壁高温腐蚀、管壁减薄引起爆管停机 ,严重影响锅炉安全运行。经研究 ,水冷壁管壁减薄、高温腐蚀的主要原因是 :煤粉冲刷水冷壁表面 ;在水冷壁表面的还原性气氛中 ,煤中硫化物受热分解 ,导致SO2 浓度增加 ,从而引起高温腐蚀。为了防护水冷壁高温腐蚀 ,采用了多种防护措施 ,包括更换使用渗铝管、表面涂抹耐腐蚀涂料、电弧喷涂耐磨防蚀合金等多种工艺。通过分析比较认为 :电弧喷涂耐磨防蚀合金工艺效果最好 ,值得在电力行业大力推广。 相似文献
1