排序方式: 共有36条查询结果,搜索用时 22 毫秒
1.
2.
3.
4.
采用了计算注入干扰下电缆网络节点响应波形的时域电磁拓扑求解方法。在传输线SPICE模型和电缆网络节点SPICE模型的基础上,通过SPICE软件求解电缆网络时域响应波形,该方法可以简化传输线网络时域响应波形求解的过程。为验证方法的有效性,建立简单的传输线网络,并将传输线网络转换成SPICE网络,通过SPICE模拟计算处在注入干扰下各电磁网络节点处的电磁响应波形,利用方波噪声源进行实验,对两个选定网络进行脉冲注入。实验表明,所述方法与实测数据有较好的一致性,当传输线均匀时,影响传输线网络响应波形的因素主要有:(1)传输线中的时延;(2)传输线网络节点上的反射。 相似文献
5.
Electrostatic discharge(ESD) phenomena involve both electrical and thermal effects,and a direct electrostatic discharge to an electronic device is one of the most severe threats to component reliability.Therefore, the electrical and thermal stability of multifinger microwave bipolar transistors(BJTs) under ESD conditions has been investigated theoretically and experimentally.100 samples have been tested for multiple pulses until a failure occurred.Meanwhile,the distributions of electric field,current density and lattice temperature have also been analyzed by use of the two-dimensional device simulation tool Medici.There is a good agreement between the simulated results and failure analysis.In the case of a thermal couple,the avalanche current distribution in the fingers is in general spatially unstable and results in the formation of current crowding effects and crystal defects.The experimental results indicate that a collector-base junction is more sensitive to ESD than an emitter-base junction based on the special device structure.When the ESD level increased to 1.3 kV,the collector-base junction has been burnt out first.The analysis has also demonstrated that ESD failures occur generally by upsetting the breakdown voltage of the dielectric or overheating of the aluminum-silicon eutectic.In addition,fatigue phenomena are observed during ESD testing,with devices that still function after repeated low-intensity ESDs but whose performances have been severely degraded. 相似文献
6.
7.
以甲基丙烯酸甲酯、丙烯酸丁酯、丙烯酸和三乙二醇二甲基丙烯酸酯等作为单体,制备了一种水性丙烯酸树脂,并与无机硅酸盐进行杂化。由于丙烯酸树脂与无机杂化后的树脂中硅氧键结合力比未杂化的丙烯酸树脂的碳碳键强,杂化树脂理应具备更好的热稳定性,但实际表现相反。为探究 Li2SiO3对杂化树脂有机高分子链段的作用机理,采用物理混合方式,配制了梯度质量分数 Li2SiO3与水性丙烯酸树脂的复合样品,通过热重分析仪(TGA)和傅立叶变换红外光谱分析仪(FT-IR)对复合样品进行表征,证明了杂化后的丙烯酸树脂羰基邻位的活泼氢与Li2SiO3表面羟基之间形成了分子间氢键,导致树脂热性能下降。 相似文献
8.
静电放电电磁场的特性及分布规律 总被引:10,自引:7,他引:3
现行的静电放电(ESD)抗扰度测试标准IEC 61000-4-2只规定了放电电流的波形,没有对实验平台上的辐射场进行说明,经常会出现实验结果不一致的情况。为解决静电放电抗扰度实验重复性差的问题,选取3种不同厂商生产的符合IEC标准规定的静电放电模拟器进行实验,并在不同位置测量放电过程中产生的磁场和电场。实验结果表明:在严格控制实验条件的情况下,模拟器的重复性可以得到保证。距离放电点较近处,不同品牌模拟器产生的电磁场一致性较差,但随着测试距离的增大差异逐渐减小。抗扰度实验平台上磁场强度随着测试距离的增加单调减少,而电场强度先减小,在靠近金属板边缘处反而增大。此外,电场和磁场均在距放电点20cm区域内变化剧烈,40cm以外区域内变化缓慢。所以,新的静电放电抗扰度测试标准应该规范放电过程中的电磁场,适当增大放电点和受试设备间的距离可提高抗扰度实验结果的一致性,并通过提高放电电压来保证测试的严酷等级。 相似文献
9.
10.