E7766, a Macrocycle-Bridged Stimulator of Interferon Genes (STING) Agonist with Potent Pan-Genotypic Activity

A strategy for creating potent and pan-genotypic stimulator of interferon genes (STING) agonists is described. Locking a bioactive U-shaped conformation of cyclic dinucleotides by introducing a transannular macrocyclic bridge between the nucleic acid bases leads to a topologically novel macrocycle-bridged STING agonist (MBSA). In addition to substantially enhanced potency, the newly designed MBSAs, exemplified by clinical candidate E7766 , exhibit broad pan-genotypic activity in all major human STING variants. E7766 is shown to have potent antitumor activity with long lasting immune memory response in a mouse liver metastatic tumor model. Two complementary stereoselective synthetic routes to E7766 are also described.     

Well‐defined,environment‐friendly synthesis of polypeptides based on phosgene‐free transformation of amino acids into urethane derivatives and their applications

In this study, both naturally occurring and artificial amino acids were successfully transformed into the corresponding urethane derivatives using diphenyl carbonate. The urethanes thus prepared could be efficiently cyclized into amino acid N‐carboxyanhydrides (NCAs) without the requirement of phosgene. In addition, the presence of primary amines converted the urethane derivatives into NCAs and initiated the ring‐opening polymerization of the in situ formed NCAs, allowing for the well‐defined synthesis of polypeptides. These polypeptides contained initiating ends functionalized by an amine‐derived residue and propagating ends bearing the reactive amino group. By precise control of the structures of the polypeptides, various polypeptide conjugates such as block copolymers and graft copolymers were successfully synthesized as designed, and their applications in antifouling coatings against proteins, drug delivery systems and biosensors were demonstrated. © 2019 Society of Chemical Industry     

Measurements of thermal-neutron capture cross-section of Cesium-135 by applying mass spectrometry

ABSTRACT

The thermal-neutron capture cross-section (σ₀) and resonance integral (I₀) were measured for the ¹³⁵Cs(n,γ)¹³⁶Cs reaction by an activation method and mass spectrometry. Because of difficulty in the preparation of pure ¹³⁵Cs samples, we used ¹³⁵Cs contained as an impurity in a normally available ¹³⁷Cs standard solution. An isotope ratio of ¹³⁵Cs and ¹³⁷Cs in a standard ¹³⁷Cs solution was measured by mass spectrometry to quantify ¹³⁵Cs. Cesium-135 impurity along with the ¹³⁷Cs standard solution was irradiated at the hydraulic conveyer of the research reactor in the Institute for Integral Radiation and Nuclear Science, Kyoto University. Wires of Co/Al and Au/Al alloys were used as neutron monitors to measure thermal-neutron fluxes and epi-thermal Westcott’s indices at an irradiation position. A gadolinium filter was used to measure the σ₀, and a value of 0.133 eV was taken as the cut-off energy. Gamma-ray spectroscopy was used to measure induced activities of ¹³⁷Cs, ¹³⁶Cs and monitor wires. On the basis of Westcott’s convention, the σ₀ and I₀ values were derived as 8.57 ± 0.25 barn, and 45.3 ± 3.2 barn, respectively. The value of σ₀ obtained in the present study agreed within the limits of uncertainties with the past-reported value of 8.3 ± 0.3 barn.     

Study on estimating electric potential in space between parallel electrodes

We have been studying on estimating distribution of permittivity between measurement electrodes using capacitance and electric potential. Two arc electrodes were separated by long distance and there electrodes were surrounded by additional electrodes respectively. In past research work, we carried out numerical electric analysis for calculating the capacitance and electric potential using Finite Element Method (FEM) and compared with experimental and numerical results. The capacitance values were almost agreed with experimental and numerical results. However, the electric potential values were different between experimental and numerical results in conventional studies. In this paper, we proposed an equivalent circuit including the stray capacity and measurement method for capacitance, the electric potential in space between long distance electrodes was estimated.     

High Levels of the Cleaved Form of Galectin-9 and Osteopontin in the Plasma Are Associated with Inflammatory Markers That Reflect the Severity of COVID-19 Pneumonia

Numbers of patients with coronavirus disease 2019 (COVID-19) have increased rapidly worldwide. Plasma levels of full-length galectin-9 (FL-Gal9) and osteopontin (FL-OPN) as well as their truncated forms (Tr-Gal9, Ud-OPN, respectively), are representative inflammatory biomarkers. Here, we measured FL-Gal9, FL-OPN, Tr-Gal9, and Ud-OPN in 94 plasma samples obtained from 23 COVID-19-infected patients with mild clinical symptoms (CV), 25 COVID-19 patients associated with pneumonia (CP), and 14 patients with bacterial infection (ID). The four proteins were significantly elevated in the CP group when compared with healthy individuals. ROC analysis between the CV and CP groups showed that C-reactive protein had the highest ability to differentiate, followed by Tr-Gal9 and ferritin. Spearman’s correlation analysis showed that Tr-Gal9 and Ud-OPN but not FL-Gal9 and FL-OPN, had a significant association with laboratory markers for lung function, inflammation, coagulopathy, and kidney function in CP patients. CP patients treated with tocilizumab had reduced levels of FL-Gal9, Tr-Gal9, and Ud-OPN. It was suggested that OPN is cleaved by interleukin-6-dependent proteases. These findings suggest that the cleaved forms of OPN and galectin-9 can be used to monitor the severity of pathological inflammation and the therapeutic effects of tocilizumab in CP patients.     

Experimental study of neutron counting in a zero-power reactor driven by a neutron source inherent in highly enriched uranium fuels

Even a zero-power reactor core containing highly enriched uranium has a weak neutron source inherent in uranium 235, and consequently, a neutron counter placed closely to the core without external neutron source registers a certain counting rate. The study of the counting is very important for zero-power reactor physics experiments with a high precision. In this experimental study, first, at a shutdown state of the UTR-Kinki reactor without start-up neutron source, a pulse height distribution of output signals from a neutron proportional counter was measured to confirm that these signals resulted from neutron detections. At several subcritical states of the UTR, then, the Feynman-α analysis was carried out to confirm that the neutrons detected by the counter must be fission neutrons multiplied by fission chain reactions. The correlation amplitude measured in the Feynman-α analysis was much higher than that measured in a previous drive by start-up source. Further, it was also confirmed that the subcriticality dependence of neutron counting rate followed the source multiplication formula. This feature indicated that the one-point model was very successful in the subcritical range including the shutdown state.     

Modeling of quantitative relationships between physicochemical properties of active pharmaceutical ingredients and tensile strength of tablets using a boosted tree

Objectives: The aim of this study was to explore the potential of boosted tree (BT) to develop a correlation model between active pharmaceutical ingredient (API) characteristics and a tensile strength (TS) of tablets as critical quality attributes.

Methods: First, we evaluated 81 kinds of API characteristics, such as particle size distribution, bulk density, tapped density, Hausner ratio, moisture content, elastic recovery, molecular weight, and partition coefficient. Next, we prepared tablets containing 50% API, 49% microcrystalline cellulose, and 1% magnesium stearate using direct compression at 6, 8, and 10?kN, and measured TS. Then, we applied BT to our dataset to develop a correlation model. Finally, the constructed BT model was validated using k-fold cross-validation.

Results: Results showed that the BT model achieved high-performance statistics, whereas multiple regression analysis resulted in poor estimations. Sensitivity analysis of the BT model revealed that diameter of powder particles at the 10th percentile of the cumulative percentage size distribution was the most crucial factor for TS. In addition, the influences of moisture content, partition coefficients, and modal diameter were appreciably meaningful factors.

Conclusions: This study demonstrates that BT model could provide comprehensive understanding of the latent structure underlying APIs and TS of tablets.     

γ-radiation effects on metal oxide particles and their wetted surfaces

ABSTRACT

Typical metal oxide corrosion products of structural materials have been irradiated with γ-rays in ultra-pure water to investigate the effect of radiation on the surface oxide and the nature of adsorbed water. Analysis techniques including thermal gravimetric analysis, differential thermal analysis, diffuse reflectance infrared Fourier transform spectroscopy, and X-ray photoelectron spectroscopy before and after γ-irradiation were employed to investigate surface structural effects and adsorbed water behaviour. The production of H₂ in the oxide nanoparticle mixtures was investigated by gas chromatography to probe the mechanism of radiolysis in the water/oxide mixtures and the relationship with surface water. The nature of water at the surface of the oxides was affected by γ-radiation and the relationship was dependent on the particle composition. The rate of H₂ production was shown to be oxide dependent, and higher rates of H₂ formation were attributed to the decomposition of surface adsorbed water. Changes to the surface chemistry and H₂ production rates were found to be highly dependent on the surface chemistry of the metal oxide nanoparticle and no bulk structural changes were observed.     

Structures and mechanical properties of electrospun cellulose nanofibers/poly(ε-caprolactone) composites

Poly(ε-caprolactone) (PCL) is one of the ecofriendly biodegradable polymers with excellent moldability but with rather low mechanical properties especially for the industrial and biomedical use. In this research, to overcome the problem, the two types of cellulose nanofibers, the cellulose acetate nanofibers (CA-NF) and the cellulose nanofibers (C-NF), were composited into PCL for the enhancement of the mechanical properties of PCL. CA-NF were prepared by electrospinning and converted into C-NF afterward by deacetylation. It was found that the Young's modulus of the CA-NF/PCL composite at the fiber concentration of 35 wt% significantly increased by ~3 times as compared with that of neat PCL, whereas C-NF/PCL of the same fiber concentration also increased by ~4.5 times. It was also found that the Young's moduli of CA-NF/PCL nearly reached the theoretical values calculated by the equation suggested by Tsai, but that the Young's moduli of C-NF/PCL could not reach the theoretical values. It indicates that CA-NF possessed better compatibility with PCL than C-NF, agreeing well with the fracture-surface analyses of the two composites by the scanning electron microscopy.     

Frequency of Upward Lightning Hits to Wind Turbines in Winter

In recent years, frequent damage to wind turbines by winter lightning has been reported in the region along the Sea of Japan. It is a serious finding that lightning hits concentrate on wind turbines in this region. The authors investigated the increase rate of the frequency of lightning hits on wind turbines due to wind turbine construction by using LLS (lightning location system) data. As a result, an experimental formula to estimate the increase rate of the frequency of lightning hits on wind turbines as a function of parameters related to the construction conditions, namely the height of wind turbines, the height above sea level, and the latitude, is proposed.