Optimum design for buckling of plain and stiffened composite axisymmetric shell panels/shells

The buckling of plain and discretely stiffened composite axisymmetric shell panels/shells made of repeated sublaminate construction is studied using the finite element method. In repeated sublaminate construction, a full laminate is obtained by repeating a basic sublaminate, which has a smaller number of plies. The optimum design for buckling is obtained by determining the layup sequence of the plies in the sublaminate by ranking, so as to achieve maximum buckling load for a specified thickness. For this purpose, a four-noded 48-dof quadrilateral composite thin shell element, together with fully compatible two-noded 16-dof composite meridional and parallel circle stiffener elements are used.     

Electrical properties of N2O/NH3 plasma grownoxynitride on strained-Si

Growth of ultrathin (<100 Å) oxynitride on strained-Si using microwave N₂O and NH₃ plasma is reported. X-ray photoelectron spectroscopy (XPS) results indicate a nitrogen-rich layer at the strained-Si/SiO₂ interface. The electrical properties of oxynitrides have been characterized using a metal-insulator-semiconductor (MIS) structure. A moderately low value of insulator charge density (6.1×10¹⁰ cm^-2) has been obtained for NH₃ plasma treated N₂O oxide sample. Nitrided oxide shows a larger breakdown voltage and an improved charge trapping properties under Fowler-Nordheim (F-N) constant current stress     

Bending and free vibration analysis of shear deformable laminated composite beams by finite element method

In the present investigation a higher-order shear deformation theory and the conventional first-order theory are used to develop a finite element method to analyse accurately the bending and free vibration behaviour of laminated composite beams, using nine-noded isoparametric elements. The higher-order theory assumes all the displacement components, u, v and w, which contain variation up to a cubic power of z. The effects of various parameters such as fibre orientation, stacking sequence, span-to-thickness ratio and support condition on the non-dimensionalised deflections, stresses and fundamental frequencies are investigated. Cases where only the higher-order theory is likely to yield accurate results are highlighted.     

Furnace grown gate oxynitride using nitric oxide (NO)

Gate oxynitride was grown in NO for the first time. This approach can provide a tight N accumulation near the Si/SiO₂ interface. Much lower thermal budget is required for an NO process than for an N₂O process to produce an oxynitride with useful properties. Submicron MOSFET's with NO oxynitride showed superior current drive characteristics and comparable hot carrier immunity to those with N₂O oxynitride     

The polar cluster like behavior in Ti substituted BaZrO3 ceramics

In this paper we report the evolution of the polar cluster like behavior with the incorporation of Ti⁴⁺ ion in BaZrO₃ Ceramics. Dielectric behavior of BaZr_xTi_(1−x)O₃ (x = 1.00, 0.95, 0.90, 0.85) ceramics is studied in the temperature range from 300 to 30 K. Polar cluster like behavior becomes more prominent with the increase in content of Ti⁴⁺ ion. The dielectric relaxation is analyzed by Vogel–Fulcher relation and Arrhenius law. Frequency dependence of dielectric constant and low loss tangent of these materials can be useful for the potential applications at low temperature.     

Finite element computation of the strain energy release rate for kinking of a crack

The approximate energy release rate for a crack which extends, or kinks, away from its original direction has been computed by finite element analysis using three different methods: stiffness derivative procedure, J integral method and crack closure integral procedure. A case study is presented to compare the computational accuracies. It suggests that a satisfactory approximation can be obtained provided that the ratio of kink length to original crack length, l(0)/a0.04, despite the interaction of the crack tip and knee stress singularities.

---

Résumé En utilisant trois méthodes différentes (dérivation de la raideur, intégrale J et intégrale de fermeture de la fissure), on a calculé par éléments finis la vitesse approchée de relaxation de l'energie dans le cas d'une fissure qui diverge ou qui part en arborescence par rapport à sa direction initiale.On présente une étude de cas de manière à comparer les précisions respectives obtenus dans les calculs.Cette étude suggère qu'une approximation satisfaisante peut être obtenue, pour autant que le rapport de la longueur déviée à la longueur initiale de la fissure soit inférieure ou égale à 0,04, en dépit de l'interaction entre l'extrémité de la fissure et la singularité de la contrainte.

     

Prediction of mode I fracture toughness of unidirectional fibre composites with arbitrary crack fibre orientation from its lowest or matrix fracture tougness

Corrigendum

Prediction of mode I fracture toughness of unidirectional fibre composites with arbitrary crack fibre orientation from its lowest or matrix fracture tougnessby P.K. Sarkar and S.K. Maiti