Wide- and narrow-band bandpass coplanar filters in the W-frequency band

This paper deals with the design of passive coplanar devices in the W-frequency band. As long as coplanar transmission lines are correctly dimensioned, analytical models based on quasi-TEM approximation can be used. Such models are associated with a correct definition of the reference planes at the junctions and employed for junction discontinuities, T- and cross-junctions. In order to validate these assertions, simulated and experimental data on classical quarter-wavelength shunt-stub filters are first presented. Then the design of traditional coupled-line filters is examined. The problems in terms of insertion loss associated with these kinds of narrow-band applications are discussed here. Minimization of insertion losses requires increasing the width of the strips. Consequently, the design becomes complex and modeling using transmission-line models less accurate. Nevertheless, as an optimization procedure is needed to tune the filter theoretically, such a very fast design method is necessary. Simulated and experimental results in the range 500 MHz to 110 GHz are compared throughout the paper.     

An 8-GHz f/sub t/ carbon nanotube field-effect transistor for gigahertz range applications

In this letter, the authors report on the high-frequency (HF) performance of self-assembled carbon nanotube field-effect transistors. HF device structures including a large number of single-wall carbon nanotubes have been designed and optimized in order to establish a new state of the art. The device exhibits a current gain (|H/sub 21/|/sup 2/) cutoff frequency (f/sub t/) of 8 GHz and a maximum stable gain value of 10 dB at 1 GHz, after de-embedding the access pads. Considering such results, nanotube-based circuits with gigahertz performance are now conceivable.     

Chemical sensor based on a novel capacitive microwave flexible transducer with polymer nanocomposite-carbon nanotube sensitive film

Microsystem Technologies - This study presents the results on the feasibility of a resonant planar chemical capacitive sensor in the microwave frequency range suitable for gas detection and...     

Single carbon nanotube transistor at GHz frequency

We report on microwave operation of top-gated single carbon nanotube transistors. From transmission measurements in the 0.1-1.6 GHz range, we deduce device transconductance gm and gate-nanotube capacitance Cg of micro- and nanometric devices. A large and frequency-independent gm approximately 20 microS is observed on short devices, which meets the best dc results. The capacitance per unit gate length of 60 aF/microm is typical of top gates on a conventional oxide with epsilon approximately 10. This value is a factor of 3-5 below the nanotube quantum capacitance which, according to recent simulations, favors high transit frequencies fT=gm/2piCg. For our smallest devices, we find a large fT approximately 50 GHz with no evidence of saturation in length dependence.     

Analysis and characterization of comparison shopping behavior in the mobile handset domain

In this work we characterize the session-level behavior of users on an Indian mobile phone comparison shopping website. We also correlate the popularity of handset on various news sources to its popularity on the shopping website. There are three aspects to our study: data analysis, correlation between news sources of product information and popularity of a handset, and behavior prediction. We have used KL divergence to show that a time-homogeneous Markov chain is observed when the number of clicks varies from 5 to 30. Our results depict that Markov chain model does not hold in entirety for comparison shopping setting but tells us how far the Markov chain model holds for this setting. Our analysis corroborates intuition that increasing price leads to decrease in popularity. After the strong correlation between various variables and user behavior was found, we predict the users macro (the overall sales of handset) and micro behavior (whether a user will convert or exit the site) using Markov logic networks. Our predictive model validates the intuition that past browsing behavior is an important predictor for future behavior. Methodology of combining data analysis with machine learning is, in our opinion, a new approach to the empirical study of such data sets.     

Operational,environmental, and resource productivity factors driving spatial distribution of gillnet and longline fishers targeting Nile-perch (Lates niloticus), Lake Victoria

Operational and environmental factors limited available resource space of gillnet and longline fishers targeting Nile perch in the Speke gulf and open lake of southern Lake Victoria and drove their encounter rates with patches of fish resulting in gear specific distributional patterns. Catch-rate patterns were similar by region and gear: large (>50?cm) Nile-perch densities increased over distance from homeport and deeper in the water column while small Nile perch (<50?cm) densities decreased. Effects of season, (setting) depth and region were present but small and obscured by high variation in daily catch-rates and individual fisher strategies. Both fisheries distributed themselves over the size-productivity spectrum of Nile perch but reacted differently to patterns in size distribution of Nile perch: gillnetters focused more on numbers of productive juveniles between 30 and 60?cm at on average 5?km distance (59?min travel time) from homeport and longliners on larger sized 40–80?cm Nile perch deeper in the water column at 7?km (108?min). Sampled fishers likely were representative of most of the Nile perch fisheries. If so, this means that fishing pressure is mainly exerted on nearshore lake areas, and more lightly fished offshore areas may act as a refuge for adult Nile perch. Total catch-rates by gear were generally equalized over the resource space, increasing slightly with distance from homeport, according to ideal free distribution predictions. Nile perch fishers on Lake Victoria appear to distribute themselves according to the underlying productivity distribution of the resource within the constraints of their available resource space.     

Numerical analysis of device performance of metamorphic InyAl1-yAs/InxGa1-xAs(0.3⩽x⩽0.6) HEMTs on GaAs substrate

A numerical model describing the influence of InAs mole fraction on metamorphic HEMT structures (MM-HEMT) is proposed. The material properties are calculated using the Monte Carlo method, while the charge control law is calculated using a self-consistent solution of Poisson's and Schrodinger's equations. The modeling of the dc, ac, noise and high frequency performance of a device with 0.25-μm gate length is performed using the quasi-two-dimensional (Q2D) approach. This analysis shows that an InAs mole fraction of about 0.40 is an optimum composition for manufacturing high gain, low noise amplifiers. In this range of composition, the performance of MM-HEMT structures is similar to that obtained for lattice-matched HEMTs on InP substrates     

Synthesis of dysprosium oxide by homogeneous precipitation

Nanocrystals of uniform dysprosium oxide (Dy₂O₃) particles have been prepared by homogeneous precipitation technique. The particles were produced by aging DyCl₃solution in presence of urea at elevated temperature. The particles were characterized with respect to their size, shape, and thermal decomposition behavior. It was found that the precipitated particles were spherical, uniform in size, and amorphous in nature. Upon heating in air, these particles decomposed into oxide and no change in morphology was observed. The dysprosium ion concentration was found to have significant effect on the particle size and its distribution.