Biodegradation of poly(lactic acid)—cassava bagasse composites produced by injection molding

Neat poly (lactic acid) (PLA) and PLA/cassava bagasse (CB) composites were used to produce seedling tubes by extrusion and injection molding. The tubes were buried in simulated soil, and their biodegradation was investigated by weight loss, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). After 180 days, the composites' biodegradation was higher than neat PLA material, and the higher the CB content, the higher the biodegradation, which caused fissures and voids in the material. The biodegradation of PLA/CB composites increased the phosphorus content in the soil after 180 days. Composites of PLA with CB, an abundant agro-industrial residue in Brazil, are promising because they can reduce the environmental impact due to CB's proper destination, and the composites' costs and biodegradation are faster than pure PLA material. Both the faster biodegradation of the tube and the higher P content are advantageous for seedling tubes.     

Fabrication of lotus-type porous carbon steel by the continuous zone melting method and its mechanical properties

A lotus-type porous carbon steel with cylindrical pores was fabricated by the continuous zone melting method in a pressurized mixture of hydrogen and helium gases. The porosity increases with increasing partial pressure of the hydrogen gas, while the pore diameter remains almost constant, independent of the pressure. The ultimate tensile strength of the specimen with cylindrical pores parallel to the tensile direction is lower than the estimated value, assuming that the strength is decreased in proportion to the decrease of the cross-sectional area of the specimen, while the yield strength is higher than the estimated value. The compressive yield strength is also higher than the estimated value. The increase in yield strength is considered to be due to precipitation strengthening. The tensile strength is increased by quenching and tempering, while the elongation decreases. Such mechanical properties are discussed in terms of the microstructural analysis.     

Suitable fixation condition for rat liver using microwave irradiation and its application to the immunohistochemistry of glutamate dehydrogenase

In 50 patients auditory threshold and brain stem evoked potential studies were carried out before and after myelography. Due to the analysis of amplitudes and latencies of auditory brain stem measurements, significant functional disorders of the hearing organ and the auditory pathway could be demonstrated. In most of the patients these functional disorders were found to be subclinical, whereas 12 patients showed alterations extending from a subjectively slight hearing loss to an audiometrically objectified acute hearing loss depending on its intensity in each case. The reasons of these functional disorders could not be clarified. An open cochlear aqueduct through which perilymph enters the subarachnoidal space leading to a secondary endolymphatic hydrops can be considered as the cause in cases where manifest symptoms develop. The changes in brain stem audiometry can be additionally explained by changes in osmolality of the inner ear fluids which may lead to the development of an endolymphatic hydrops.     

Erythroid potentiating activity of tissue inhibitor of metalloproteinases on the differentiation of erythropoietin-responsive mouse erythroleukemia cell line, ELM-I-1-3, is closely related to its cell growth potentiating activity

The erythroid-potentiating activity (EPA) of the tissue inhibitor of metalloproteinase-1 (TIMP-1) was re-examined using ELM-I-1-3, a mouse erythroleukemia cell line, which responded well to erythropoietin. Depletion of pre-existing TIMP-1 from fetal calf serum in culture medium using monoclonal antibody suppressed erythropoietin-induced differentiation as measured by the induction of hemoglobin, commitment assay and globin mRNAs. The removal of TIMP-1 also suppressed the proliferation of ELM-I-1-3 as measured by cell number and de novo DNA synthesis. These changes were reversed by the addition of purified TIMP-1 to the culture medium. Anti-TIMP-1 antibody also blocked both hexamethylene bisacetamide (HMBA)-induced erythroid differentiation and the proliferation of both ELM-I-1-3 and Friend erythroleukemia cells. Considering previous reports analyzing the chemical induction of Friend mouse erythroleukemia cell differentiation, our results suggest that erythropoietin- or HMBA-induced erythroid differentiation might also be coupled with cell proliferation. Our 3H thymidine-uptake experiment shows that TIMP-1 removal was also effective in the inhibition of cell growth of various other cell lines in addition to erythroleukemia cell lines. These results suggest that EPA action of TIMP-1 on erythroid leukemia cell lines is closely related to its activity to promote the cell growth of various cell lines and cells including erythroleukemia cell lines.     

Design for Consecutive Testability of System-on-a-Chip with Built-In Self Testable Cores

This paper introduces a new concept of testability called consecutive testability and proposes a design-for-testability method for making a given SoC consecutively testable based on integer linear programming problem. For a consecutively testable SoC, testing can be performed as follows. Test patterns of a core are propagated to the core inputs from test pattern sources (implemented either off-chip or on-chip) consecutively at the speed of system clock. Similarly the test responses are propagated to test response sinks (implemented either off-chip or on-chip) from the core outputs consecutively at the speed of system clock. The propagation of test patterns and responses is achieved by using interconnects and consecutive transparency properties of surrounding cores. All interconnects can be tested in a similar fashion. Therefore, it is possible to test not only logic faults but also timing faults that require consecutive application of test patterns at the speed of system clock since the consecutively testable SoC can achieve consecutive application of any test sequence at the speed of system clock.     

Preparation and antibacterial activity of novel fluoroalkyl end-capped oligomers/silica nanocomposites-encapsulated low molecular biocides

Fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomer [R_F-(DOBAA) _n -R_F] reacted with tetraethoxysilane (TEOS) and silica nanoparticles in the presence of low-molecular weight biocides such as hibitane, hinokitiol, and hinokioil under alkaline conditions to afford R_F-(DOBAA) _n -R_F/silica nanocomposites-encapsulated these biocides in excellent to moderate isolated yields. Fluoroalkyl end-capped N,N-dimethylacrylamide oligomer [R_F-(DMAA) _n -R_F] and acrylic acid oligomer [R_F-(ACA) _n -R_F]/silica nanocomposites-encapsulated hibitane were obtained under similar conditions. Dynamic light scattering measurements showed that the size of these fluorinated nanocomposites-encapsulated biocides thus obtained is nanometer size-controlled. Additionally, these fluorinated nanocomposites were shown to have a good dispersibility and stability in methanol and water. Of particular interest, these fluorinated nanocomposites-encapsulated biocides were found to have a good antibacterial activity against Staphylococcus aureus, and these nanocomposites were applied to the surface modification of traditional organic polymers such as poly(methyl methacrylate).     

Crack opening displacement of a through-wall crack in a plate subjected to bending load

This study was performed in order to clarify crack opening displacement (COD) of through-wall cracks in a plate subjected to bending load. The former COD evaluation methods were mainly developed corresponding to tensile load, but there has been nothing that has been developed corresponding to bending load. Therefore, the authors evaluated CODs of the through-wall cracks in plates which were subjected to a bending load using finite element method (FEM) analyses, and proposed a simplified COD evaluation method accounting for both tensile and bending loads. The proposed method is useful for leakage evaluation at a crack opening of an elbow crown or in the vicinity of the coolant surface of a vessel in which the bending stress is relatively large.     

Lectin-like characteristics of recombinant human interleukin-1beta recognizing glycans of the glycosylphosphatidylinositol anchor

We found that 35S-labeled recombinant human interleukin-1beta (rhIL-1beta) binds phosphatidylinositol-specific phospholipase C-treated human placental alkaline phosphatase, phosphatidylinositol-specific phospholipase C-treated trypanosome surface variant glycoproteins, and urinary uromodulin immobilized on plates or immobilized on CNBr-activated Sepharose 4B. The interaction between rhIL-1beta and these glycoproteins was lectin-like, since it was inhibited in the presence of specific saccharides, i.e. mannose 6-phosphate or synthetic Ac-NH.CH2.CH2. PO4--->6Manalpha1-->(+/-2Manalpha1-->+/-6Manalpha1-->) propyl at about 1 microM. On the other hand, a wide variety of compounds including biantennary sugar chains derived from these glycoproteins as well as ethanolamine phosphate, inositol phosphate, mannose 6-sulfate, mannose 1-phosphate, glucose 6-phosphate, and mannitol 6-phosphate did not show any inhibitory effect at concentrations up to 1 mM. These results indicate that rhIL-1beta interacts with these glycoproteins via the mannose 6-phosphate diester of glycans on the glycosylphosphatidylinositol (GPI) anchor. Furthermore, when monolayers of polarized Madin-Darby canine kidney cells on polycarbonate filter membranes were incubated with 35S-rhIL-1beta in either the apical or basolateral chamber, 35S-interleukin-1beta was found to bind specifically to the apical membranes with a Ka value of 4.6 x 10(7) M-1, and the specific interaction was inhibited by 1 microM mannose 6-phosphate. Since the mannose 6-phosphate diester moiety exists only in the GPI glycans on plasma membranes, it was evident that interleukin-1beta can directly interact with the mannose 6-phosphate diester component of the intact glycan of GPI anchors on plasma membranes.