Theoretical estimation of dielectric loss of oxide glasses using nonequilibrium molecular dynamics simulations

To theoretically explore amorphous materials with a sufficiently low dielectric loss, which are essential for next-generation communication devices, the applicability of a nonequilibrium molecular dynamics simulation employing an external alternating electric field was examined using alkaline silicate glass models. In this method, the dielectric loss is directly evaluated as the phase shift of the dipole moment from the applied electric field. This method enabled us to evaluate the dielectric loss in a wide frequency range from 1 GHz to 10 THz. It was observed that the dielectric loss reaches its maximum at a few THz. The simulation method was found to qualitatively reproduce the effects of alkaline content and alkaline type on the dielectric loss. Furthermore, it reasonably reproduced the effect of mixed alkalines on the dielectric loss, which was observed in our experiments on sodium and/or potassium silicate glasses. Alkaline mixing was thus found to reduce the dielectric loss.     

Molecular Targeted Therapy for the Bone Loss Secondary to Pyogenic Spondylodiscitis Using Medications for Osteoporosis: A Literature Review

Pyogenic spondylodiscitis can cause severe osteolytic and destructive lesions in the spine. Elderly or immunocompromised individuals are particularly susceptible to infectious diseases; specifically, infections in the spine can impair the ability of the spine to support the trunk, causing patients to be bedridden, which can also severely affect the physical condition of patients. Although treatments for osteoporosis have been well studied, treatments for bone loss secondary to infection remain to be elucidated because they have pathological manifestations that are similar to but distinct from those of osteoporosis. Recently, we encountered a patient with severely osteolytic pyogenic spondylodiscitis who was treated with romosozumab and exhibited enhanced bone formation. Romosozumab stimulated canonical Wnt/β-catenin signaling, causing robust bone formation and the inhibition of bone resorption, which exceeded the bone loss secondary to infection. Bone loss due to infections involves the suppression of osteoblastogenesis by osteoblast apoptosis, which is induced by the nuclear factor-κB and mitogen-activated protein kinase pathways, and osteoclastogenesis with the receptor activator of the nuclear factor-κB ligand-receptor combination and subsequent activation of the nuclear factor of activated T cells cytoplasmic 1 and c-Fos. In this study, we review and discuss the molecular mechanisms of bone loss secondary to infection and analyze the efficacy of the medications for osteoporosis, focusing on romosozumab, teriparatide, denosumab, and bisphosphonates, in treating this pathological condition.     

8-epi PGF2 alpha generation during coronary reperfusion. A potential quantitative marker of oxidant stress in vivo

BACKGROUND: Myocardial reperfusion is believed to be associated with free radical injury. However, indexes of oxidative stress in vivo have been limited by their poor specificity and sensitivity. Isoprostanes are stable products of arachidonic acid formed in a nonenzymatic, free radical-catalyzed manner. We have developed a sensitive and specific assay for one of these compounds, 8-epi prostaglandin (PG) F2 alpha. METHODS AND RESULTS: To address its utility as an index of oxidative stress during coronary reperfusion, we measured urinary levels by gas chromatography/mass spectrometry in a canine model of coronary thrombolysis, in patients with acute myocardial infarction treated with thrombolytic therapy, and in patients after elective coronary artery bypass surgery. Urinary 8-epi PGF2 alpha was unchanged after circumflex artery occlusion in a canine model of coronary thrombolysis (n = 13; 437.2 +/- 56.4 versus 432.7 +/- 55.2 pmol/mmol creatinine) but increased significantly (P < .05) immediately after reperfusion (553.8 +/- 64.7 pmol/mmol). Urinary levels were increased (P < .001) in patients (n = 12) with acute myocardial infarction given lytic therapy (265.8 +/- 40.8 pmol/mmol) compared with age-matched control subjects (n = 20; 91.5 +/- 11.8 pmol/mmol) and patients with stable coronary disease (n = 20; 95.7 +/- 6.3 pmol/mmol). Preoperative levels rose from 113.2 +/- 11.8 to 248.2 +/- 86.3 pmol/mmol at 30 minutes into revascularization to 332.2 +/- 82.6 pmol/mmol by 15 minutes after global myocardial reperfusion (P < .05) and dropped to 181.2 +/- 50.4 pmol/mmol at 30 minutes and 120.2 +/- 9.9 pmol/mmol at 24 hours after bypass surgery (n = 5). Corresponding changes in spin adduct formation, found with electron paramagnetic resonance, were noted in 2 patients. CONCLUSIONS: These data support the hypothesis that free radical generation occurs during myocardial reperfusion. Measurement of isoprostane production may serve as a noninvasive index of oxidative stress.     

Fracture toughness evaluation of adjacent flow weld line in polystyrene by the SENB method

Fracture toughness of adjacent flow weld lines, defined as weld lines that occur when two flow fronts meet and continue to flow together in the same direction (meld line or hot weld line), was evaluated by the single‐edge notched‐bend (SENB) method using three differently‐shaped obstructive pins. Although the fracture toughness varied depending upon the shapes of the pin, the values could be standardized as the distance from the meeting point of the two flow fronts flowing around the pin. The fracture toughness decreased drastically from the meeting point along the weld line and then slightly increased. These characteristic features could be explained by flow‐induced molecular orientation at the weld line interface. The molecules around the meeting point that were initially oriented parallel to the weld line due to fountain flow were able to relax, and then entanglement across the weld line interface developed because the flow stopped in the middle of the filling process, resulting in high fracture toughness. In contrast, the material at the downstream side of the weld line continued flowing during the filling process, being stretched along the flow direction. So, the molecular orientation at this area could not relax. In addition, the V‐notch shape, i.e., the depth and length at the surface of the weld line, which also varied depending on the shape of the obstacles, was considered to be identical when the meeting point was allowed to be a datum point. Thus, the meeting point was found to be a significant factor when the properties of weld lines are investigated. POLYM. ENG. SCI., 45:1059–1066, 2005. © 2005 Society of Plastics Engineers     

Theoretical model for flash generation

Reduction of flash generated in a gas vent is of great concern for manufacturers of electronic parts. The present study proposes a theoretical model for flash generation through consideration of flow characteristics in a gas vent. The model predicts the factors controlling flash, i.e., material parameters such as zero‐shear viscosity, crystallization temperature, thermal conductivity, and heat capacity, and process parameters such as injection and mold wall temperatures, packing pressure, and the clearance of a gas vent. On the other hand, we measure the amount of flash generated in the molding of poly(phenylene sulfide) (PPS) composites containing glass fiber and spherical fillers (CaCO₃ or Al₂O₃). Flash reduces with decreasing size of spherical fillers. These experimental data are successfully interpreted using the flash model. Polym. Eng. Sci., 45:198–206, 2005. © 2005 Society of Plastics Engineers     

A flow simulation for the epoxy casting process using a 3D finite‐element method

A three‐dimensional flow simulation for epoxy casting has been developed. A control‐volume‐based finite‐element method is employed, containing a conservative upwind formulation for the advection terms and equal order interpolations for all variables. This simulation predicts the non‐isothermal and reactive flow behavior under the gravity. The viscosity and reaction‐rate parameters were estimated by using a dynamic rheometer and a differential scanning calorimeter. The predicted flow front advancement and temperature profiles in the calculation domain similar to the mold cavity were in close agreement with the corresponding experimental results. The variation of epoxy surface configuration with flow rate also showed the same tendency between the prediction and the experiment. This simulation seems to be applicable not only to the epoxy casting, but also to other molding processes of various thermoset resins. POLYM. ENG. SCI. 45:364–374, 2005. © 2005 Society of Plastics Engineers.     

Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

Cortical blood flow response to hypercapnia during anaesthesia in Moyamoya disease

Cortical blood flow (CoBF) was measured continuously by the laser-Doppler method to evaluate the effect of hypercapnia on cortical blood flow during ten surgical procedures in ten young patients (mean +/- SD 9.3 +/- 6.4 yr) with Moyamoya disease. The CoBF was 42.8 +/- 13.4 (ml.100 g-1.min-1) during normocapnia (PaCO2 = 39.0 +/- 2.4 mmHg), and 38.7 +/- 14.4 during hypercapnia (PaCO2 = 47.1 +/- 2.5 mmHg). There was a decrease in CoBF with hypercapnia (P < 0.05) so that the normal CoBF response to hypercapnia was impaired during surgery in the patients with Moyamoya disease. He concluded that patients with Moyamoya disease have a precarious cerebral circulation and hypercapnia may be detrimental to the cortical circulation. This suggests that normocapnia is preferable to hypercapnia in patients with Moyamoya disease during anaesthesia.