Ammonia production using iron nitride and water as hydrogen source under mild temperature and pressure

Ammonia generation was studied in the reaction between water and nitrogen-containing iron at 323 K and atmospheric pressure. Similar to metallic Fe, the interstitial compound Fe₃N reduced water through Fe oxidation to produce hydrogen gas, while the N combined with atomic hydrogen to produce ammonia as a byproduct. The addition of carbon dioxide to this system accelerated the reaction with concomitant consumption of carbon dioxide. The promoted ammonia production upon addition of carbon dioxide can be attributed to the generation of atomic hydrogen from the redox reaction of carbonic acid and Fe, as well as removal of used Fe from the reaction system through the formation of a soluble carbonato complex. When carbonate was added to the reaction system, the production rates of ammonia and hydrogen increased further. The results here confirmed that ammonia can be synthesized from iron nitride under mild conditions by utilizing carbon dioxide.     

Apollonius tenth problem via radius adjustment and Möbius transformations

The Apollonius Tenth Problem, as defined by Apollonius of Perga circa 200 B.C., has been useful for various applications in addition to its theoretical interest. Even though particular cases have been handled previously, a general framework for the problem has never been reported. Presented in this paper is a theory to handle the Apollonius Tenth Problem by characterizing the spatial relationship among given circles and the desired Apollonius circles. Hence, the given three circles in this paper do not make any assumption regarding on the sizes of circles and the intersection/inclusion relationship among them. The observations made provide an easy-to-code algorithm to compute any desired Apollonius circle which is computationally efficient and robust.     

Electron acceleration by single and double laser beams

The longitudinal electric field of single and double Gaussian laser beams are used to accelerate electrons. The longitudinal field of the single beam is concentrated on the axis and is favourable for acceleration. A set of two beams is considered. Beams run parallel, collinearly, overlap partially and have a phase difference iπ in between. As a result, the transverse components of fields cancel each other while the longitudinal components are double-fold. In both schemes, the electrons are accelerated in lengths of the Rayleigh range, which is common to the plasma-based accelerators.     

Changes in extracellular nitrite and nitrate levels after inhibition of glial metabolism with fluorocitrate

The role of glial cells in nitric oxide production in the cerebellum of conscious rats was investigated with a glial selective metabolic inhibitor, fluorocitrate. The levels of nitric oxide metabolites (nitrite plus nitrate) in the dialysate following in vivo microdialysis progressively increased to more than 2-fold the basal levels during a 2-h infusion of fluorocitrate (1 mM), and the increase persisted for more than 2 h after the treatment. Pretreatment with N(G)-nitro-L-arginine methyl ester attenuated the fluorocitrate-induced increase in nitric oxide metabolite levels. None of the glutamate receptor antagonists, including D(-)-2-amino-5-phosphonopentanoic acid, 6,7-dinitroquinoxaline-2,3-dione, and (+/-)-alpha-methyl-4-carboxyphenylglycine, inhibited the fluorocitrate-induced increase. The L-arginine-induced increase was significantly reduced by fluorocitrate treatment, while N-methyl-D-aspartate, (+)-alpha-amino-3-hydroxy-5-methylisoxazole-4-propionic acid, and trans-(+/-)-1-amino-(1S,3R)-cyclopentane-dicarboxylic acid increased nitric oxide metabolites levels in the fluorocitrate-treated rats, as much as in control animals. These results suggest that glial cells play an important role in modulating nitric oxide production in the cerebellum by regulating L-arginine availability.     

Expert system for dispatch control in restoration of ehv power system after complete blackout

Present-day power systems operate with high reliability, and it is rare that a blackout will extend over an entire system swiftly and securely. This paper considers automatic power supply to loads after a complete blackout of a system. First, taking into account characteristics of generators, loads, and initial power sources, a method is proposed of allocating several generators to each load in parallel to the system and supplying power to the load sequentially. Second, to remove the imbalance between supply and demand of power, a method is proposed of adjusting the amount of supply and generation according to a present imbalance and the sum of past ones. Third, to automatically issue orders for start-up, parallel, follow-up, stand-by, and stoppage of generators, several rules for each power station are set and an expert system is made based on them. Finally, the expert system is applied to a model power system, and it is verified that it can restore loads without any trouble for a complete blackout which occur at any time of a day and in any restoration pattern.     

Studies on syntheses and permeabilities of special polymer membranes. XVI. Permeation and separation characteristics of aqueous polymer solutions for acrylonitrile-styrene copolymer membranes

The permeation and separation characteristics of aqueous polymer solutions using acrylonitrile-styrene copolymer membranes were investigated under various conditions. The membranes obtained from dimethyl sulfoxide solution of acrylonitrile-styrene copolymer have not a sufficient reproducibility and stability of permeation. These lacks were improved by adding ethylene glycol or glycerol to the casting solution and treating the membranes with pressure. The permeation and separation characteristics were influenced significantly by the additional amount of above additives, the heat treatment temperature, and the operating pressure. It was found that the concentration polarization of poly(vinyl alcohol) molecules onto the surface of the acrylonitrile-styrene copolymer membranes is smaller than that onto hydrophilic polymer membranes such as membranes of cellulose acetate, cellulose nitrate, and nylon 12, etc. Moreover, the acrylonitrile-styrene copolymer membranes show better performance for separation and concentrating of aqueous polymer solutions than hydrophilic membranes.     

Visible-light-active titanium oxide photocatalyst realized by an oxygen-deficient structure and by nitrogen doping

A visible-light (vis)-active titanium oxide photocatalyst was prepared by a simple wet process: the calcination of the hydrolysis product of Ti(SO₄)₂ with ammonia using an ordinary electric furnace in dry air at 400 °C. The color of this photocatalyst was vivid yellow and absorbed light in the blue (400 nm) to bluish-green (550 nm) region exclusively. Its structure was characterized to anatase with oxygen-deficient stoichiometry by XRD and X-ray photoelectron spectroscopy. Nitrogen was also detected, but only in trace amounts. Using blue-light-emitting diodes as a light source, 540 ppm of acetone was decomposed within 36 h and a stoichiometric yield of CO₂ was obtained. From the results of the crystalline size D, it was found that vis-activity could be realized on polycrystalline particles and the grain-boundaries (GBs) are thought to be important, since oxygen vacancies are easily created in GBs, which could form a GB state. Finally, we concluded that oxygen-deficient sites formed in GBs are important to emerge vis-activity, and nitrogen doped in the part of oxygen-deficient sites are important as a blocker for reoxidation.     

Studies on syntheses and permeabilities of special polymer membranes

Summary The permeation and separation characteristics of methanol/n-pentanol systems and n-propanol/n-heptane systems through nylon 12 membranes were studied by changing the feed composition of the binary organic mixtures. These characteristics were discussed from the viewpoints of physical and chemical nature of the permeating molecules and the membrane.     

Critical temperature for production of MAG by esterification of different FA with glycerol using <Emphasis Type="Italic">Penicillium camembertii</Emphasis> lipase

Production of MAG by a lipase-catalyzed reaction is known to be effective at low temperature. This phenomenon can be explained by assuming that synthesized MAG are excluded from the reaction system because MAG, which have low m.p., are solidified at low temperatures. Consequently, MAG are efficiently accumulated and do not serve as the precursor of DAG. If this hypothesis is correct, the critical temperature for MAG production, defined as the highest temperature at which DAG synthesis is repressed, should depend on the m.p. of the MAG. Esterification of FFA with glycerol using Candida rugosa, Rhizopus oryzae, and Penicillium camembertii lipases produced MAG efficiently at low temperatures. However, Candida lipase showed very low esterification activity at high temperatures (>20°C), and Rhizopus lipase produced not only MAG but also DAG even at low temperatures. Meanwhile, P. camembertii lipase catalyzed synthesis of MAG only from FFA and glycerol at low temperatures, although the enzyme catalyzed synthesis of DAG from MAG in addition to synthesis of MAG at high temperatures. We thus studied the effect of temperature on esterification of C₁₀−C₁₈ FFA with glycerol using Penicillium lipase as a catalyst and determined the critical temperatures for production of MAG. The critical temperature for production of each MAG showed a linear correlation with m.p. of the MAG, which supported the hypothesis. In addition, because the m.p. of MAG are estimated from that of the constituent FA, the optimal temperature for production of MAG can be predicted from the m.p. of the FFA used as a substrate.