Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe49.5Mn30Co10Cr10C0.5 multicomponent alloy

Laser aided additive manufacturing(LAAM)was used to fabricate bulk Fe49.5Mn30Co10Cr10C0.5 interstitial multicomponent alloy using pre-alloyed powder.The room temperature yield strength(σy),ultimate tensile strength(σUTS)and elongation(εUST)were 645 MPa,917 MPa and 27.0％respectively.The as-built sample consisted of equiaxed and dendritic cellular structures formed by elemental segregation.These cellular structures together with oxide particle inclusions were deemed to strengthen the material.The other contributing components include dislocation strengthening,friction stress and grain bound-ary strengthening.The high εUTS was attributed to dislocation motion and activation of both twinning and transformation-induced plasticity(TWIP and TRIP).Tensile tests performed at-40℃and-130℃demonstrated superior tensile strength of 1041 MPa and 1267 MPa respectively.However,almost no twinning was observed in the fractured sample tested at-40℃and-130℃.Instead,higher fraction of strain-induced hexagonal close-packed(HCP)ε phase transformation of 21.2％were observed for fractured sample tested at-40℃,compared with 6.3％in fractured room temperature sample.     

Reusable and durable electrostatic air filter based on hybrid metallized microfibers decorated with metal-organic-framework nanocrystals

As global air pollution becomes increasingly severe,various types of fibrous filters have been devel-oped to improve air filter performance.However,fibrous filters have limitations such as high packing density that generally causes high-pressure drop and ultimately deterioration in the filtration effi-ciency.High-pressure particulate matter precipitators are limited in terms of scope for commercialization because they require high voltage supplies and ozone generators.In this study,we develop fibrous fil-ters with enhanced durability and improved performance using metallized microfibers decorated with metal-organic-framework(MOF)nanocrystals.Not only does the efficiency of the developed filters remain at or above 97％for 0.50-1.5 μm PMs but the durability also significantly increases.In addi-tion,using the water purification ability of the MOF,we explore the dye degradation effect of the hybrid microfibers by immersing them into Rhodamine B aqueous solution.In such an experiment the Rho-damine B aqueous solution is completely purified by the presence of the hybrid microfibers under the UV irradiation.     

一种5-甲磺酰基-1H-吡啶-2-酮的合成方法

以5-溴-2-甲氧基吡啶为原料,经取代、过氧化、脱甲基化3步制备了5-甲磺酰基-1H-吡啶-2-酮.取代过程选用正丁基锂先与5-溴-2-甲氧基吡啶进行卤素-锂交换反应,再用二甲基二硫醚进行亲核取代,反应彻底且收率较高.过氧化过程选用间氯过氧苯甲酸作为过氧化剂,将甲硫基氧化为甲磺酰基,此步选用n(2-甲氧基-5-甲硫基吡啶)∶n(间氯过氧苯甲酸)=1.00∶2.50的投料比,有较好的收率.在脱甲基化过程中选用氢溴酸醋酸溶液进行脱甲基化,目标产物直接在醋酸中析出,提纯较为简便.目标产物的总收率为58.03％,其结构经1H NMR、13C NMR和IR确证.该方法操作简单,收率较高,易提纯,可大批量生产.     

Research on phase shift characteristics of electromagnetic wave in plasma

The phase shift characteristics reflect the state change of electromagnetic wave in plasma sheath and can be used to reveal deeply the action mechanism between electromagnetic wave and plasma sheath. In this paper, the phase shift characteristics of electromagnetic wave propagation in plasma were investigated. Firstly, the impact factors of phase shift including electron density,collision frequency and incident frequency were discussed. Then, the plasma with different electron density distribution profiles were employed to investigate the influence on the phase shift characteristics. In a real case, the plasma sheath around the hypersonic vehicle will affect and even break down the communication. Based on the hypersonic vehicle model, we studied the electromagnetic wave phase shift under different flight altitude, speed, and attack angle. The results indicate that the phase shift is inversely proportional to the flight altitude and positively proportional to the flight speed and attack angle. Our work provides a theoretical guidance for the further research of phase shift characteristics and parameters inversion in plasma.     

Reduced texaphyrin: A ratiometric optical sensor for heavy metals in aqueous solution

We report here a water-soluble metal cation sensor system based on the as-prepared or reduced form of an expanded porphyrin, texaphyrin. Upon metal complexation, a change in the redox state of the ligand occurs that is accompanied by a color change from red to green. Although long employed for synthesis in organic media, we have now found that this complexation-driven redox behavior may be used to achieve the naked eye detectable colorimetric sensing of several number of less-common metal ions in aqueous media. Exposure to In(III), Hg(II), Cd(II), Mn(II), Bi(III), Co(II), and Pb(II) cations leads to a colorimetric response within 10 min. This process is selective for Hg(II) under conditions of competitive analysis. Furthermore, among the subset of response-producing cations, In(III) proved unique in giving rise to a ratiometric change in the ligand-based fluorescence features, including an overall increase in intensity. The cation selectivity observed in aqueous media stands in contrast to what is seen in organic solvents, where a wide range of texaphyrin metal complexes may be prepared. The formation of metal cation complexes under the present aqueous conditions was confirmed by reversed phase high-performance liquid chromatography, ultra-violet-visible absorption and fluorescence spectroscopies, and high-resolution mass spectrometry.     

以金属氧化物为原料改进燃烧法合成γ-LiAlO_2（英文）

提出一种合成γ-LiAlO_2的替代解决方案—改进燃烧法直接合成γ-LiAlO_2,并将其用于相对简单的反应体系中,原料为非氧化性化合物如Al_2O_3和LiOH,燃料为尿素。采用1:1、1.5:1和2:1的非化学计量Li/Al摩尔比,在900和1000°C下反应5 min,制备LiAlO_2,并对其组织和结构进行表征。考察Li/Al摩尔比对材料形貌和高γ射线辐照下材料稳定性的影响。结果表明,所得粉体的晶体结构为?-LiAlO_2和?-LiAlO_2,其取决于Li/Al摩尔比。因此,用该方法可以成功合成微砖状、多面体状和层状?-LiAlO_2,而无需任何后续处理。γ辐照结果表明,所得到的?-LiAlO_2不分解,只形成少量的Li_2CO_3;由此可以确定,辐照会导致固结,不利于氚的有效提取;结果证明,用燃烧法生产高纯度?-LiAlO_2不需要硝酸盐前驱体。     

Selective hydrogenation of acetylene over Pd/CeO2

Five hundred ppm Pd/CeO₂ catalyst was prepared and evaluated in selective hydrogenation of acetylene in large excess of ethylene since ceria has been recently found to be a reasonable stand-alone catalyst for this reaction. Pd/CeO₂ catalyst could be activated in situ by the feed gas during reactions and the catalyst without reduction showed much better ethylene selectivity than the reduced one in the high temperature range due to the formation of oxygen vacancies by reduction. Excellent ethylene selectivity of ~100% was obtained in the whole reaction temperature range of 50°C–200°C for samples calcined at temperatures of 600°C and 800°C. This could be ascribed to the formation of Pd_xCe_1−xO_2−y or Pd-O-Ce surface species based on the X-ray diffraction and X-ray photoelectron spectroscopy results, indicating the strong interaction between palladium and ceria.     

加氢补充精制在润滑油加工过程中的应用

在社会经济水平和科技水平不断发展的现阶段,社会中各个方面的发展都得了明显的提升和进步。对于工业化的生产来说,润滑油的使用是很关键的,能够促进机械设备维持一个正常的工作状态,而且对延长其使用寿命也具有很大的贡献。因此,本文论述加氢补充精制在润滑油加工过程的作用及应用能够有效作用于整个工业化过程的具体工作当中,促进我国工业化的进步。     

Effective and simple recovery of 1,3-propanediol from a fermented medium by liquid–liquid extraction system with ethanol and K_3PO_4

1,3-Propanediol,traditionally obtained from fossils,has numerous industrial applications,including use in the production of high performance polymers.The microbial production of 1,3-propanediol presents several opportunities,and the final purity grade determines its price and commercial viability.The development of novel separation technology could improve the economic viability of the bioproduction of 1,3-propanediol.Thus,we investigated salting-out extraction as a novel process for 1,3-propanediol recovery from fermentation broth.Initially,a screening for the best salt/solvent combination was conducted and then optimized using the response surface methodology.The solvents studied were methanol,ethanol,isopropanol and acetone,and the salts examined were K_2HPO_4,Na_2CO_3,K_2CO_3,(NH_4)_2SO_4,NaHPO_4,K_3PO_4 and C_6H_5NaO_7.The optimal extraction system consisted of 34 wt%K_3PO_4,28 wt% ethanol,and 38 wt% fermentation broth containing 23.0 g·L~(-1)1,3-propanediol,which gave the highest partition coefficient of 33 and recovery yield of 97%.The results demonstrated that salting-out extraction was a promising method for 1,3-propanediol recovery from fermentation broth.