An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding

Abstract

The I-shaped cross-sectional beam of CFRP (CFRP I-beam) is usually manufactured by the continuous protrusion method. Carbon fibers can only be arranged in the longitudinal direction. The CFRP I-beam with arbitrary arrangement of carbon fiber was manufactured with applying the electro-activated deposition molding method. The carbon fiber fabric was immersed in the deposition solution and energized, epoxy resin precipitated around carbon fiber and impregnated. The resin-impregnated fabric was installed to the mold, and the CFRP I-beam was fabricated. The CFRP I-beam was subjected to three-point bending tests, and the relationship between load-deflection was simulated by finite-element analysis.     

A Restart Control Method for Position Sensorless PMSM Drive Systems Without Potential Transformer for Railway Vehicle Traction

This paper proposes a restart control method for position sensorless PMSM drive systems without a potential transformer for railway vehicle traction. This method can estimate the initial rotor speed and position under coasting conditions over the entire speed range. The method can also be used when the back‐EMF voltage is higher than the inverter DC link voltage. The proposed method is verified by experiments using a 200‐kW PMSM.     

Main‐chain smectic liquid crystalline polymer exhibiting unusually high thermal conductivity in an isotropic composite

The thermal conductivity (TC) of an isotropic composite comprising of a main‐chain smectic liquid crystalline PB‐10 polyester and 50‐μm‐sized roughly spherical magnesium oxide (MgO) particles is investigated. The increase in the composite TC with higher MgO fractions is steeper than that expected by Bruggeman's theory for the TC of a polydomain PB‐10 polyester (0.52 W m^?1 K^?1). When the filler content is larger than 30 vol %, the composite TC approaches a value that can be explained only if the polyester functions as a matrix with 1.0 W m^?1 K^?1, which is five times as high as those of isotropic common polymers (0.2 W m^?1 K^?1). Such an unusually high TC for a polymer matrix is attributed to some polymer lamellae that lie parallel to the particle surface and are stacked toward neighboring particles, thus creating effective heat paths between the particles and a continuous thermal network in a composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39896.     

Enzymatic Analysis of Positional Distribution of Fatty Acids in Solid Fat by 1,3-Selective Transesterification with Candida antarctica Lipase B

A protocol for the analysis of the positional distribution of fatty acids (FA) in solid triacylglycerols (TAG) was developed using sn-1(3) selective alcoholysis catalyzed by immobilized Candida antarctica lipase B (CALB). One part by weight of solid fat and ten parts by weight of ethanol (99.5 %) were warmed to liquefy the fat. After adding 0.44 parts by weight of CALB, the mixture was shaken at 50 °C for 10 min then at 30 °C for 2.8 h. The recovery of 2-MAG after the 3-h transesterification reaction was ca. 85 % of the maximum theoretical yield (33 mol%), with the loss of 15 % attributable to the acyl migration from sn-2 to sn-1(3). The recovery was similar to that of the solvent-free alcoholysis of structured lipids, 1,3-dipalmitoyl, 2-oleoyl glycerol and 1,3-dioleoyl, 2-palmitoyl glycerol, conducted at 30 °C for 3 h. In contrast, the acyl migration from sn-1(3) to sn-2 was hardly observed. Because the detected acyl migration was only in the direction of sn-2 to sn-1(3), and not vice versa, it is proposed to determine the FA composition of the sn-2 position of TAG by the gas chromatographic analysis of 2-MAG fraction recovered from the enzymatic reaction mixture, and the FA composition of sn-1(3) position by a mass balance using the FA composition of TAG and of the sn-2 position as inputs. The procedure was successfully applied to palm oil and shea butter, and docosahexaenoic acid (DHA)-rich single cell oil from Aurantiochytrium sp. KH105 for the first time.     

Microbial community structure in activated sludge floc analysed by fluorescence in situ hybridization and its relation to floc stability

The efficiency of activated sludge treatment plants is dependent on the solid-liquid separation properties of the activated sludge. A critical parameter is the stability of the microbial flocs. Weak flocs deflocculate easily leaving increased concentrations of suspended solids in the effluent. The knowledge about how different bacteria are attached to the flocs and their influence on the bioflocculation is limited. In this study, the deflocculation of different phylogenetic groups of bacteria in activated sludge from a full scale plant was investigated. The experiments were carried out by using a shear method where the sludge flocs are deflocculated under controlled shear conditions. The degree of deflocculation was measured as increase in turbidity of the supernatant. Identification and quantification of the microbial community structure of both total activated sludge and deflocculated bacteria were conducted with group-specific gene probes for broad groups of bacteria (Alphaproteobacteria, Betaproteobacteria, Gammaproteobacteria and Actinobacteria) and fluorescence in situ hybridization (FISH). The microbial community structure of the deflocculated bacteria was different compared to the total activated sludge with a higher abundance of Gammaproteobacteria in the supernatant indicating that different groups of bacteria are bound with different strength to the floc surface. The results show that the bacteria in the outer parts of the flocs are relatively loosely bound to the floc matrix and can be easily eroded from the surface when exposed to shear.     

Methanogenic digestion using mixed substrate of acetic, propionic and butyric acids

Experiments on methanogenic digestion using high concentrations of mixed substrate were conducted. The major intermediate products of anaerobic digestion such as acetic, propionic and butyric acids were mixed in a ratio of 2:1:1 (COD basis), respectively, and used as a substrate for feeding into continuous-flow chemostat reactors maintained at 35°C. These reactors were operated stably at higher feed substrate concentrations and shorter hydraulic retention times (HRT) than those of using a single component of volatile fatty acids as a substrate. At an HRT of 4.43 days, the methanogenesis occurred normally up to a feed substrate concentration of 70,000 mg COD I⁻¹. At a feed substrate concentration of 20,000 mg COD I⁻¹, the methanogenesis occurred normally up to an HRT of 2.91 days and the minimum SRT for microbial populations was calculated to be 2.42 days. An increase in feed substrate concentration adversely affected the propionate degradation strikingly, while a decrease in HRT significantly adversely affected the acetate and propionate degradation. The methane production was 0.301 g⁻¹ COD utilized, and it was independent of the feed substrate concentration and HRT. Bacilli were predominant in all reactors, but sarcinae appeared in the reactors with high feed substrate concentrations and short HRTs. Phenomena in digester failure due to methanogen washout were also observed.     

Organic removal by denitritation and methanogenesis and nitrogen removal by nitritation from landfill leachate

A system consisting of a two-stage UASB and anoxic-oxic reactor was used to enhance COD and nitrogen removal from landfill leachate. To improve denitrification efficiency, the raw leachate with recycled final effluent was pumped into the first-stage UASB (UASB1) to carry out simultaneous denitrification and methanogenesis. The results over 180 d show that the maximum organic removal rate in UASB1 and UASB2 was 12.5 and 8.5 kgCODm(-3)d(-1) in the oxic zone of the A/O reactor, respectively. The COD and biochemical oxygen demand (BOD5) removal efficiency of the system was 80-92% and about 99%, respectively. Without controlling temperature (17-30 degrees C) and dissolved oxygen (0.5-4.0 mgL(-1)), the maximum NH4+-N removal rate was 0.68 kg NH4+-Nm(-3)d(-1), and about 99% of NH4+-N removal was obtained by nearly complete nitritation. The 81-93% total nitrogen removal was obtained by complete denitrification in the UASB1 and in the anoxic zone of the A/O reactor. Fluorescence in situ hybridization (FISH) analysis of the sludge samples from A/O reactor showed that ammonia oxidizing bacteria (AOB) consisted 4% of the eubacterium, while nitrite oxidizing bacteria (NOB) counted less than 0.2% of that. The study shows that the main factors achieving and maintaining nitritation are a proper range of free ammonia concentration obtained by dilution recycled final effluent that inhibits NOB but not AOB; effective control on aeration time by indication of "ammonia valley" on pH profile; and highly efficient denitrification and its reproducing alkalinity to result in pH above 8.5.     

Fundamental study of high Q‐factor RF spiral inductor using carbonyl‐iron/epoxy composite magnetic core

In order to increase the Q‐factor of an RF spiral inductor used in the RF front‐end circuit of smartphone handsets, we introduced a carbonyl‐iron/epoxy composite magnetic core in the air‐core spiral inductor. The composite magnetic core, which was made by metal‐mask printing, consisted of carbonyl‐iron powder of 1.1 μm mean diameter and an epoxy resin matrix. We found that the 45 vol.% CIP composite magnetic core had a saturation magnetization of 0.9 T, relative permeability of ∼6, and loss tangent (tan δ) of ∼0.2 at 1 GHz. A two‐turn copper spiral inductor fabricated with the composite magnetic core filled only in the spacing between the conductor lines showed a clear Q‐factor increase of ∼29% compared to the air‐core spiral inductor at 1 GHz. Thus we obtained a substantial increase in the Q‐factor by the embedded composite magnetic core in the spacing between the conductor lines. The main reason for this is that the magnetic flux passing through the conductor lines was decreased by the magnetic core embedded in the spacing between conductor lines as a result of the magnetic flux passing mainly through the embedded magnetic core. Therefore, proximity effect is suppressed in the conductor line of the spiral coil. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Sensitivity of charged particle activation analysis for long-lived radioactive nuclide determination

ABSTRACT

Charged Particle Activation Analysis (CPAA) utilizing an 8-MeV proton beam has been studied for determination of 35 long-lived radioactive nuclides. We accumulated the reaction cross section and nuclear decay data by referring to nuclear database supplied by National Nuclear Data Center in Brookhaven National Laboratory. We also calculated the reaction cross sections by using statistical model code ALICE. By using the nuclear data, we have derived determination sensitivity of the radioactive nuclides relative to unit weight and specific radioactivity. The result indicates that several hardly measurable nuclides with long half-lives such as ¹³⁵Cs, ²⁴⁴Pu, ¹²⁹I, ¹²⁶Sn, ⁹³Mo, ¹⁰⁷Pd, ²³⁶U, ²⁴⁸Cm, and ²³⁷Np have high sensitivity. It may be concluded that CPAA can be applied to determination of several long-lived nuclei and will provide a quick and non-destructive analysis method.     

An Approach to a Higher‐Power‐Density Power Supply for a 380‐V DC Distribution System

A methodology for realizing a higher‐power‐density DC‐DC converter has been proposed for a power unit installed in a 380‐V DC distribution system. The possibility of the converter design will be strengthened by using the series–parallel connection topology for isolated DC‐DC converters. A converter prototype with a power density of 10 W/cm³ has been fabricated, and the feasibility of the converter design has been confirmed experimentally. This result contributes to the realization of a highly efficient and highly space‐saving 380‐V DC distribution system. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 51–62, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22494