Synthesis and Reactivity of Iron(II) Complexes with a New Tripodal Imine Ligand

A new tripodal imine ligand tris(2-(propan-2-ylideneamino)ethyl)amine (imine₃tren) was prepared in order to stabilize high valent iron-oxido complexes. Iron complexes were synthesized in template reactions from iron(II) salts, tris(2-aminoethyl)amine (tren) and acetone. Due to the reversibility of the imine formation, complexes with different ligands were obtained depending on the reaction conditions. Three complexes, [Fe(imine₃tren)(OAc)₂] ( 1 ), [Fe(imine₃tren)(OAc)]OTf ( 2 ) and [(imine₃tren)₂Fe₂(F)₂](SbF₆)₂ ( 3 ), could be synthesized and structurally characterized. However, reactions with hydrogen peroxide, iodosobenzene or ozone did not lead to any kind of “oxygen adduct” complex that could be spectroscopically observed.     

Influence of Zn2+ doping on the morphotropic phase boundary in lead-free piezoelectric (1 – x)Na1/2Bi1/2TiO3-xBaTiO3

A series of morphotropic phase boundary (MPB) compositions of (1–x)Na_1/2Bi_1/2TiO₃-xBaTiO₃ (x = 0.05, 0.055, 0.06, 0.065, 0.07), with and without 0.5 mol% Zn-doping was synthesized using the solid-state route. The samples were characterized using X-ray diffraction, dielectric analysis, and electromechanical measurements (piezoelectric d₃₃ coefficient, coupling factor k_p, mechanical quality factor Q_m, and internal bias field E_bias). The increase in the ferroelectric-relaxor transition temperature upon Zn-doping was accompanied by a shift of the MPB toward the Na_1/2Bi_1/2TiO₃-rich side of the phase diagram. Higher tetragonal phase fraction and increased tetragonal distortion were noted for Zn-doped (1 – x)Na_1/2Bi_1/2TiO₃-xBaTiO₃. In addition, ferroelectric hardening and the presence of an internal bias field (E_bias) were observed for all doped compositions. The piezoelectric constant d₃₃ and the coupling coefficient k_p decreased by up to ∼30%, while a 4- to 6-fold increase in Q_m was observed for the doped compositions. Apart from establishing a structure–property correlation, these results highlight the chemically induced shift of the phase diagram upon doping, which is a crucial factor in material selection for optimal performance and commercialization.     

Floc-based sequential partial nitritation and anammox at full scale with contrasting N2O emissions

New Activated Sludge (NAS^®) is a hybrid, floc-based nitrogen removal process without carbon addition, based on the control of sludge retention times (SRT) and dissolved oxygen (DO) levels. The aim of this study was to examine the performance of a retrofitted four-stage NAS^® plant, including on-line measurements of greenhouse gas emissions (N₂O and CH₄). The plant treated anaerobically digested industrial wastewater, containing 264 mg N L⁻¹, 1154 mg chemical oxygen demand (COD) L⁻¹ and an inorganic carbon alkalinity of 34 meq L⁻¹. The batch-fed partial nitritation step received an overall nitrogen loading rate of 0.18-0.22 kg N m⁻³ d⁻¹, thereby oxidized nitrogen to nitrite (45-47%) and some nitrate (13-15%), but also to N₂O (5.1-6.6%). This was achieved at a SRT of 1.7 d and DO around 1.0 mg O₂ L⁻¹. Subsequently, anammox, denitrification and nitrification compartments were followed by a final settler, at an overall SRT of 46 d. None of the latter three reactors emitted N₂O. In the anammox step, 0.26 kg N m⁻³ d⁻¹ was removed, with an estimated contribution of 71% by the genus Kuenenia, which constituted 3.1% of the biomass. Overall, a nitrogen removal efficiency of 95% was obtained, yielding a dischargeable effluent. Retrofitting floc-based nitrification/denitrification with carbon addition to NAS^® allowed to save 40% of the operational wastewater treatment costs. Yet, a decrease of the N₂O emissions by about 50% is necessary in order to obtain a CO₂ neutral footprint. The impact of emitted CH₄ was 20 times lower.     

Solvent diffusion in silica/poly[styrene‐co‐(acrylic acid)] core‐shell microspheres by pulsed field gradient NMR techniques

Polymer‐coated SiO₂ particles are prepared by precipitation of poly[styrene‐co‐(acrylic acid)] on SiO₂ microspheres through an improved phase inversion method. The diffusion resistance of the polymer membrane was considered to be the critical reason for producing tailor‐made polyethylene by catalysts supported on these polymer‐coated particles. This paper employs pulsed field gradient NMR (PFG‐NMR) to distinguish diffusion of n‐hexane in different regimes, i.e., in the space between each particle, the pores in SiO₂ and the polymer shell, by their respective diffusion coefficients. By varying the observation time, the time scale of the molecular exchange is discussed. A three‐region ansatz was used to interpret the exchange and diffusion in polymer‐coated SiO₂ system, and was compared with results acquired with noncoated particles. At long diffusion times, the mean‐squared displacement, and thus the averaged self‐diffusion coefficient, of hexane in the system of polymer‐coated SiO₂ particles is significantly reduced. The PSA membrane is identified as an efficient barrier against molecular exchange between the pores in SiO₂ and the intraparticle space. Consistently, the relaxation measurements indicated that the mobility of n‐hexane molecules, especially the rotation of n‐hexane, was limited by the PSA membrane. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40160.     

Impact of amorphous and crystalline lactose on milk chocolate properties

Chocolate mass of low viscosity is preferred for most applications. Milk powder influences processing behaviour, flow properties and taste of milk chocolate. The project aimed to investigate influences of skim milk powders containing amorphous or crystalline lactose on flow properties after producing samples by roller milling and conching or alternatively by ball milling. For the first case, it was found that mass consistency before roller milling is strongly influenced by lactose type; producers must specify it and adapt initial mass fat content. Little impact on final products was found after processing milk powders at equilibrium moisture. If predried powders are used for reducing conching time, crystalline lactose leads to chocolate with slightly lower viscosity. At ball mill processing, crystalline lactose resulted in significantly lower viscosity, for example 15% at 40 s^?1; thus, for this process, it can be recommended to use special milk powders high in crystalline lactose content.     

Determination of nano-roughness of carbon fibers by atomic force microscopy

We present a novel approach to determine the surface roughness on varying scales using atomic force microscopy data. The key factor is to find a suitable background correction for the desired scale. Using the example of the surface of sized and unsized high-tenacity carbon fibers, we present an easy method to find backgrounds for widely varying scales and to evaluate respective topography and surface roughness with the same lateral resolution as the microscope itself. The analysis is done by subtracting a tunable background from the respective height data. By choosing an appropriate background to investigate the surface topography of a carbon fiber on a nm-scale, only small nano-structures with a width of around 20 nm remain after the background subtraction. Evaluating the mean roughness R _a of these nano-structures, sized carbon fibers show an overall value of around 0.1 nm while unsized carbon fibers a value of around 0.4 nm. Total background corrected height analysis shows an even distribution of these nano-structures along the fibrils of the unsized fibers, whereas for the sized fibers the nano-structures are not present. The presented method allows analysis and visualization of the distribution of nano-structures on a carbon fiber surface for the first time. This feature is used to visualize the distribution of the sizing and can further be used to investigate the influence of different production parameters on the fiber topography or to evaluate the contribution of mechanical interlocking to the interfacial strength.