Heat and mass transfer characteristics of radiative hybrid nanofluid flow over a stretching sheet with chemical reaction

Unsteady magnetohydrodynamic heat and mass transfer analysis of hybrid nanoliquid flow over a stretching surface with chemical reaction, suction, slip effects, and thermal radiation is analyzed in this study. A combination of alumina (Al₂O₃) and titanium oxide (TiO₂) nanoparticles are taken as hybrid nanoparticles and water is considered as the basefluid. Using the similarity transformation method, the governing equations are changed into a system of ordinary differential equations. These equations together with boundary conditions are numerically evaluated by using the Finite element method. The influence of various pertinent parameters on the profiles of fluids concentration, temperature, and velocity is calculated and the outcomes are plotted through graphs. The values of nondimensional rates of heat transfer, mass transfer, and velocity are also analyzed and the results are depicted in tables. Temperature sketches of hybrid nanoliquid intensified in both the steady and unsteady cases as the volume fraction of both nanoparticles rises.     

Synthesis of non-equilibrium phases in immiscible metals mechanically mixed by high pressure torsion

The structural changes in mechanically mixed metals of immiscible combinations of elements caused by bulk mechanical alloying (MA) through the use of high pressure torsion (HPT) were investigated in Ag–Ni and Nb–Zr systems. There was no alloying between Ag and Ni on atomic scale even after 100 rotations of HPT. On the other hand, the β-Zr phase started to appear after HPT 2 rotations in the Nb–Zr system, even though β-Zr is a high temperature phase. Further, Nb and Zr were completely mixed to form a bcc structured single phase after HPT 100 rotations. The sequence of alloying in the Nb–Zr system during HPT was discussed. These results clearly suggest that non-equilibrium phases can form in the Nb–Zr system by bulk MA by the use of HPT.     

Microstructure and Lattice Parameters of AlN Particle-Reinforced Magnesium Matrix Composites Fabricated by Powder Metallurgy

Magnesium matrix composites reinforced with AlN particles were fabricated by the powder metallurgy technique. The evolution of lattice constants and solid solubility levels of Al in α-Mg and the microstructure of Mg-Al/AlN composites were investigated in the present study. The results showed that the solid solubility of Al in α-Mg reached a relatively high level by the P/M process with a long time of milling. X-ray diffraction showed that the peaks of Mg phase clearly shifted to higher angles. The lattice constants and cell volume decreased significantly compared with those of standard Mg due to a significant amount of Al incorporated into α-Mg in the form of substitutional solid solution. The degree of lattice deformation decreased at a low sintering temperature and increased at higher sintering temperatures due to the presence of AlN. Microstructural characterization of the composites revealed a necklace distribution of AlN particles in the Mg matrix. Heat treatment led to precipitation of Mg₁₇Al₁₂ from the supersaturated α-Mg solid solution. The precipitate exhibited granular and lath-shaped morphologies in Mg matrix and flocculent precipitation around AlN particles.     

Performance and emission characteristics of a Kirloskar HA394 diesel engine operated on fish oil methyl esters

The high viscosity of fish oil leads to problem in pumping and spray characteristics. The inefficient mixing of fish oil with air leads to incomplete combustion. The best way to use fish oil as fuel in compression ignition (CI) engines is to convert it into biodiesel. It can be used in CI engines with very little or no engine modifications. This is because it has properties similar to mineral diesel. Combustion tests for methyl ester of fish oil and its blends with diesel fuel were performed in a kirloskar H394 DI diesel engine, to evaluate fish biodiesel as an alternative fuel for diesel engine, at constant speed of 1500 rpm under variable load conditions. The tests showed no major deviations in diesel engine's combustion as well as no significant changes in the engine performance and reduction of main noxious emissions with the exception on NO_x. Overall fish biodiesel showed good combustion properties and environmental benefits.     

Magnetoelectric properties of Ni/PZT/Ni layered composite for low field applications

A composite material when placed under the external magnetic/electric fields exhibits voltage/induced magnetization is known as magnetoelectric (ME) composite. Such composite materials should have ferroelectric and ferro/ferri magnetic phases as constituents. The magnetoelectric output is exhibited as a product property. Magnetoelectric composites are being used for variety of applications including resonators, filters, phase shifters, optical isolators, actuators and magnetic field sensors. Metal/ferroelectric/metal magnetoelectric composite using Ni and PZT as constituent phases has been fabricated in 2-2 composite pattern to study its product property. The paper presents magnetoelectric studies of Ni/PZT/Ni composite using low dc magnetic field magnetoelectric set-up. Using this ME set-up ME output of Ni/PZT/Ni composite is studied as a function of dc magnetic field. The results were analyzed to identify the useful magnetic field (dc and ac) range in which Ni/PZT/Ni sensor can be utilized for applications.     

Microstructural characterization of rapidly solidified Al-Ta alloys

Two Al-rich Al-Ta alloys containing by weight 3 and 6 pct Ta have been rapidly solidified from the melt using the ‘gun’ technique. The microstructures and the crystal structures of the phases in the as-solidified as well as those formed on subsequent decomposition of the supersaturated solid solution have been characterized. A supersaturated solid solution was obtained in both the alloys in the as-solidified condition indicating a solid solubility extension of Ta in Al to almost 6 wt pct. The supersaturated solid solutions formed in both the alloys have been found to be quite stable up to 673 K (for 1 hour). Annealing at higher temperatures resulted in the formation of rod-shaped precipitates inside the grains and massive precipitates along grain boundaries. The rod-shaped precipitates arranged in a regular pattern constitute a new metastable intermediate phase Al₇Ta having an ordered structure. The massive precipitates which form along grain boundaries constitute the equilibrium Al₃Ta phase with a tetragonal crystal structure. The transformation behavior and the morphology of the transformation products are detailed in this paper.     

Thermochemical processing of titanium alloys

As the performance requirements of structures and devices increase, new and improved materials and processes are required. One such technique is thermochemical processing, which involves the use of hydrogen as a temporary alloying element. Thermochemical processing significantly enhances both the fabricability and mechanical behavior of titanium alloys.