Voltage sag compensation with minimum energy injection by use of a micro‐SMES

This paper presents a method to compensate voltage sags with minimum energy injection for a series‐connected voltage restorer using a micro‐SMES. A circuit for extracting the fundamental symmetrical components from sag voltages and a minimum energy injection algorithm is described. Simulations of voltage sag compensation have been carried out using PSCAD/EMTDC for various faults. The simulation results confirm the validity of the proposed method and show the possibility of reducing the size of energy storage devices. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(3): 70–80, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10047     

Expectation of LET∞ for a tritium beta particle

The expectation of LET_∞ (unrestricted linear energy transfer) for a tritium beta particle around its parent nucleus in water has been calculated by the use of the energy-range relation of electrons. The amount of energy deposited by a beta particle with a certain initial energy over the interval of one micron at a definite position is obtained from the relation by the calculus of difference, and the probability that the event takes place per decay of tritium is estimated from the energy spectrum of tritium beta particles. The calculated values of expectations of LET_∞ are higher at positions close to the parent nucleus.     

Quantitative evaluation of generator power control effect of FACTS controllers for power system stabilization

The advancement of power electronics technologies has significantly developed the power system stabilizing controllers. Quantitative as well as qualitative evaluation of their effectiveness in power systems is a matter of great importance for the feasibility investigation of these apparatus. In this paper, the possible control region of FACTS controllers with series and/or shunt configuration in a single machine to infinite bus system is formulated in the powerangle curve with a set of algebraic equations. The effectiveness of TCPST (Thyristor‐Controlled Phase Shifting Transformer), SSSC (Static Synchronous Series Compensator), and TCSC (Thyristor‐Controlled Series Compensator) for the improvement of the transient stability is evaluated quantitatively as a numerical example. The correctness of the proposed method has been confirmed by analysis based on the electromagnetic transients simulation with a detailed system model. © 2001 Scripta Technica, Electr Eng Jpn, 138(3): 43–51, 2002     

Anionic polymerization of styrene in 2-methyltetrahydrofuran: temperature dependence of the field effect

Kinetics of living anionic polymerizations of styrene was investigated for lithium, sodium, and potassium salts in 2-methyltetrahydrofuran at 35, 25, 0, and ?70°C in the presence and absence of a high intensity electric field. At 35 and 25°C, a field acceleration effect was observed whereas no effect was found at 0 and ?70°C. The propagation rate constant of ion pairs was almost independent of gegen ions and their temperature dependence was smaller than that of free anions. The free ions seem to be more strongly solvated as the temperature decreases.     

Enzyme-linked immunosorvent assay using vertical microreactor stack with microbeads

The advantages of vertical microreactor stack with three-dimensional (3D) structure for immunoassay are discussed. The vertical microreactor stack uses vertical fluid flow operation with multifunctional fluid filters. The multi function of fluid filter is very effective for micromixing and passive valve operation. The mechanism of micromixing is discussed by using computational fluid dynamics (CFD), and we know that the mixing mechanism based on Coanda effect. To evaluate the micromixing performance of fluid filter, we demonstrated enzyme reaction with unique repeat mixing operation. As the results, we proved that the fluid filter has very effective mixing performance. The detection limit, which demonstrated by competition enzyme-linked immunosorvent assay (ELISA), is comparable with recommended detection limit, which suggested by Japanese ministry for the environment.     

Microstructure and properties of (Sr, Ca)CuO2/(Sr, Ca)RuO3 multilayers

Epitaxial multilayer thin films of infinite-layer (Sr, Ca)CuO₂ and perovskite (Sr, Ca)RuO₃ have been prepared on (100) SrTiO₃ substrates by multitarget rf magnetron sputtering. X-ray diffraction analyses revealed that the multilayer structure of (Sr, Ca)CuO₃/(Sr, Ca)RuO₃ was successfully fabricated with a minimum layer thickness of 20 Å. Transmission electron microscopy measurements of the multilayers indicated that there was no dislocation which normally exists in single-layer films with an infinite-layer structure. Resistivities of multilayer films at room temperature ranged from 1 to 10 m cm and showed semiconductor-like dependence against the temperature.     

A Novel Method of "Double delta Modulation" on Tracking Control of PWM converters

非线性跟踪控制是SPWM变换器的重要控制策略之一。提出了一种新型双重△调制跟踪控制方法,它由一个无滞环比较器和一个载波周期定时器组成。比较器产生PWM信号的上升沿,使得跟踪控制响应快,精度高;定时器决定PWM信号的下降沿,它保证了开关周期固定不变;文中提出了一个按周期对比较阈值进行预估调节的算法,该算法可使每个周期的平均跟踪误差均为零,同时可以抑制子谐振和跟踪失步。对三相四线电压跌落补偿系统电压跟踪的仿真研究证实了“双重△调制”策略和比较阈值的一步预估算法的有效性。最后对一个单相半桥逆变器的电流跟踪控制给出了实验结果。     

DC‐linked hybrid generation system with an energy storage device including photovoltaic generation and gas engine cogeneration for residential houses

For the past few years, hybrid generation systems including solar panel and gas cogeneration have been used for residential houses. Solar panels can generate electronic power at daytime but not at night. But the power consumption of residential houses usually peaks in the evening. The gas engine cogeneration system can generate electronic power without such a restriction, and it also can generate heat power to warm up a house or to produce hot water. In this paper we propose a solar panel and gas engine cogeneration hybrid system with an energy storage device, combined by a DC bus. If a blackout occurs, the system still can supply electronic power for special house loads. We propose a control scheme for the system related to the charging level of the energy storage device and the voltage of the utility grid, which can be applied to both grid‐connected and standalone operation. Finally, we report experiments designed to demonstrate system operation and calculations for loss estimation. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 182(4): 29–46, 2013; Published online in Wiley Online Library ( wileyonlinelibrary.com ).DOI 10.1002/eej.22321     

Stabilization of a Power System Including Inverter‐Type Distributed Generators by a Virtual Synchronous Generator

The capacity of distributed generators (DGs) connected to the grid by inverters is growing year after year. The inverters are generally controlled by a phase locked loop (PLL) in order to achieve synchronization with the power system frequency. Power systems may become unstable as the capacity of the inverter‐type DGs continues to increase, because the inverter frequency is controlled just to follow the frequency determined by other synchronous generators. It has been suggested that inverters be controlled to behave like a synchronous generator. This concept is referred to as the virtual synchronous generator (VSG). In this paper, a control scheme for a VSG is presented, and the design method for the required energy storage and the capacity for grid stabilization control by a VSG is investigated by computer simulations.