Case study of electrochemical metal removal from actual sediment, sludge, sewage and scallop organs and subsequent pH adjustment of sediment for agricultural use

In this paper we propose a method for chemical-free removal of metal from lake sediment, and its subsequent pH adjustment, based on electrochemical migration and precipitation. Such a method would enable the utilization of sediment as composting material. Sediment was placed in the anode side of a dual-bath electrochemical reactor separated by a thimble-shape cellulose filter from the cathode side, which was filled with pure water. When voltage was applied, contaminant metals in the sediment on the anode side migrated toward the cathode side, and precipitated due to the alkaline conditions caused by the cathodic reaction. After 10 days of electrolysis with 400 mA of constant current of 150 g wet lake sediment, the removal ratios of 13 kinds of elements after the electrochemical treatment were measured. Cd and Zn, the elements for which agricultural standards apply, showed 98% and 86% removal, respectively. The type of metal removed changed over time, and the order of removal was roughly from light metals to heavy metals. The acidified lake sediment after electrolysis could be neutralized without significant recontamination with Zn and Cd by using the alkaline cathode solution collected during electrolysis under a condition of tap water overflow at a rate of 1.5 L/h. The electrochemical metal removal method was effective not only for lake sediment, but also for municipal sludge cake, human sewage, and contaminated scallop organs. Cathode overflow during electrolysis tended to increase metal removal and decrease required voltage.     

Influence of quadrature‐axis reactance of large turbine generator on operation

Two‐pole large generators are extensively used in power utilities. Growing demand for electric power in recent years has led to substantial increases in the capacity of generators. In line with this trend, our company has manufactured two‐pole turbine generators in the 900,000‐kVA to 1,200,000‐kVA classes. As the capacity of generators becomes larger, equivalent circuits are increasingly expected to improve their precision in estimating operation characteristics. The Park model has been widely used as an equivalent circuit model. The Park model with quadrature axis transient reactance $x_{q}^{\prime}$ is claimed to be useful for accurately estimating the load rejection characteristics of turbine generators. However, it is difficult to measure $x_{q}^{\prime}$, few studies based on measured data have appeared. As one of the few examples, we have conducted a measured data on a 500,000‐kVA‐class generator. Recently, the authors obtained test data on $x_{q}^{\prime}$ of a 900,000‐kVA‐class generator. In this study, based on these data, we studied the effect of $x_{q}^{\prime}$ using the finite element method and a transient analysis program (EMTP‐ATP). © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 177(3): 17–27, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21099     

Concrete protection using acrylic latex paints: Effect of the pigment volume content on water permeability

Concrete can be protected by coatings, which may reduce the ingress of aggressive agents coming from external sources. Paints have a great importance on concrete durability due to the advantage of being applied to both newly built and old structures, the latter being for maintenance and repair purposes. Five acrylic latex paint formulations were prepared in laboratory. Their relative performance in inhibiting the ingress of water and their drying behavior were evaluated on concrete substrates. The relative absorption and loss of water over a length of time were determined on medium and high porosity concretes. The results showed a correlation between the paint pigment volume content and water permeability. The viability of using acrylic resin in architectural paint formulations for concrete protection against water penetration was confirmed.     

Estimating thermal performance of cool colored paints

The purpose of this study is to investigate the thermal performance of cool colored acrylic paints containing infrared reflective pigments in comparison to conventional colored acrylic paints of similar colors (white, brown and yellow) applied on sheets of corrugated fiber cement roofing. Evaluated properties are: color according to ASTM D 2244-89, the UV/VIS/NIR reflectance according to ASTM E 903-96, and thermal performance by exposure to infrared radiation emitted from a lamp with the measurement of surface temperatures of the specimens with thermocouples connected to a data logging system.Results demonstrated that the cool colored paint formulations produced significantly higher NIR reflectance than conventional paints of similar colors, and that the surface temperatures were more than 10 °C lower than those of conventional paints when exposed to infrared radiation. The study shows that cool paints enhance thermal comfort inside buildings, which can reduce air conditioning costs.     

Hemolytic reaction due to graft-versus-host (GVH) antibody production after liver transplantation from living donors: report of two cases

Among 27 patients who received minor ABO-incompatible partial liver transplantations and 19 who received major ABO-incompatible partial liver transplantations from living donors, 2 developed hemolytic anemia within 2 weeks after transplantation. These 2 patients had received livers from their living fathers whose blood type was ABO-incompatible. B-to-A transplantation was performed in patient 1 and O-to-B transplantation was performed in patient 2. Anti-A IgM and IgG were detected in the serum of patient 1, and anti-B IgM and IgG were detected in the serum of patient 2. These antibodies were eluted from the red blood cells of the patients. The coexistence of donor-specific DNA in the peripheral blood of the patients proved that they had chimerism, and graft-versus-host antibody production due to passenger B lymphocytes in the donor's liver was subsequently confirmed.     

A stacked-CMOS cell technology for high-density SRAM's

A stacked-CMOS SRAM cell technology for high-density SRAMs has been developed. It has been found that the increase of the on-current of the thin-film transistor (TFT) load leads not only to the increase of the cell noise margin, but also to the reduction of the cell area. The improvement of the electrical characteristics of the TFT load has been achieved by enlarging the grains of the polysilicon film through the use of a novel solid-phase growth technique. As a result, TFT loads with on/off current ratio of 10⁵ and off-current of 0.07 pA/μm, both promising for high-density SRAMs, have been obtained     

Oral-aboral ectoderm differentiation of sea urchin embryos is disrupted in response to calcium ionophore

Cognitive-behavioral therapy (CBT) has been shown to be a highly effective form of treatment for patients with bulimia nervosa and anorexia nervosa. Issues of satiety disturbances, food restriction, and food choice are central to this form of therapy; however, ingestive behavior research that directly addresses these issues in eating disorder patients has often been overlooked by clinicians. These areas of research are reviewed and the implications of the findings for more effective CBT therapy with anorexics and bulimics are discussed.     

Transmission of hepatitis B virus from hepatitis B core antibody-positive donors in living related liver transplants

A factor fundamental to bone formation has been identified. Gene targeting shows that core-binding factor alpha 1 (Cbfa1) plays an essential role in bone formation and osteoblast differentiation. Thus, it is now possible to begin examining the molecular mechanism of bone formation--especially osteoblast differentiation.