Radiographic appearances of esophageal stents

Among patients with esophageal carcinoma and associated dysphagia, more than 60% have unresectable disease at presentation. In such cases, the goal of treatment is primarily palliation of the dysphagia; treatment options include surgery, radiation therapy, laser ablation, and placement of stents. Beginning with the first stent-made of boxwood and silver in 1885-evolution in design led to the creation of large-diameter, rigid plastic stents placed at laparotomy and eventually placed by means of endoscopy. However, complications such as perforation, hemorrhage, dislodgment, pressure necrosis, and occlusion were frequently encountered with these stents. The development of small-diameter, expandable metal stents eliminated some of these complications. Metal stents have greatly reduced procedure-related morbidity and mortality, but complications such as perforation, malposition, migration, tumor ingrowth and overgrowth, food obstruction, and tracheoesophageal fistula persist. An efficacious and increasingly used method of treating malignant dysphagia, esophageal stent placement must undergo further improvements to reduce the frequency of complications, particularly migration and tumor ingrowth.     

Integrated fertilizer requirements of groundnut-wheat cropping system

Investigations were carried out in a long term field experiment from 1976 to 1982, on a loamy sand soil to find out the fertilizer requirements of groundnut and wheat grown in fixed rotation. Application of 26 kgP/ha to wheat alone was found to be sufficient for both wheat and succeeding groundnut. Application of phosphorus to both wheat and groundnut did not result in extra beneficial effect over P application to wheat alone. However, application of 26 kg P/ha to groundnut alone was not sufficient for succeeding wheat. There was no response from K application (25 kg K/ha) in either of these two crops. Increasing the dose of N from 50–150 kg/ha to wheat significantly increased the grain yield of wheat but the pod yield of succeeding groundnut were markedly lowered. Response of wheat to 150 kg N/ha was more marked when P was also applied to wheat and response was less when P was applied to preceding groundnut alone. Zinc application at 6.25 kg/ha to wheat alone resulted in significant increase in grain yield of wheat and pod yield of succeeding groundnut.     

The compatibility of linear low density polyethylene-polypropylene blends: Viscosity ratio plots

Blends of linear low density polyethylene (LLDPE) and polypropylene (PP) show diverse mechanical property behavior in the published literature. The main objectives of this work were: to investigate the effect of viscosity of the component phases on the mechanical properties of such blends and to use the results to obtain a method for compatibilizing diaper manufacturing waste. The significant result of the study was that although LLDPE/PP blends are often termed “incompatible,” when viscosity of the components was more closely matched to each other, increases of as much as 50% in tensile strength and modulus were observed over the “rule of mixtures” line. Also, scanning electron microscopy then showed a more diffuse interface between the component phases. Three dimensional views of plots of viscosity ratio of the blend components as a function of temperature and shear rate were used to demonstrate the closer matching of viscosities for the blend components of the higher performing blends. In processing diaper manufacturing waste, addition of a high molecular weight PP in a manufacturing scale single screw extruder, to provide a closer match of viscosities of the blend components, significantly improved mechanical properties.     

A smart application to detect pupil for small dataset with low illumination

Biometric applications are very sensitive to the process because of its complexity in presenting unstructured input to the processing. The existing applications of image processing are based on the implementation of different programing segments such as image acquisition, segmentation, extraction, and final output. The proposed model is designed with 2 convolution layers and 3 dense layers. We examined the module with 5 datasets including 3 benchmark datasets, namely CASIA, UBIRIS, MMU, random dataset, and the live video. We calculated the FPR, FNR, Precision, Recall, and accuracy of each dataset. The calculated accuracy of CASIA using the proposed system is 82.8%, for UBIRIS is 86%, MMU is 84%, and the random dataset is 84%. On live video with low resolution, calculated accuracy is 72.4%. The proposed system achieved better accuracy compared to existing state-of-the-art systems.

     

Efficient SAT-based bounded model checking for software verification

This paper discusses our methodology for formal analysis and automatic verification of software programs. It is applicable to a large subset of the C programming language that includes pointer arithmetic and bounded recursion. We consider reachability properties, in particular whether certain assertions or basic blocks are reachable in the source code, or whether certain standard property violations can occur. We perform this analysis via a translation to a Boolean circuit representation based on modeling basic blocks. The program is then analyzed by a back-end SAT-based bounded model checker, where each unrolling is mapped to one step in a block-wise execution of the program.     

Investigation of magnetic field-assisted EDM of composites

The Electrical Discharge Machining (EDM) technique was performed under the magnetic field influence to determine the material removal mechanism as well as surface roughness (SR) of nonmagnetic material. This study presents an exploration of the hybrid EDM technique assisted by magnetic field, with an aim to improve process performance. Herein, magnetic field intensity, peak current, duration of pulse-on/off, tool electrode material, and SiC percentage distribution were opted as the machining parameters. The chosen parameters were analyzed for their effects on the material removal rate (MRR) and SR while machining of SiC-reinforced aluminum-based metal matrix composites. Taguchi methodology was adopted for optimization of process parameters to achieve better MRR and lower SR. The experimental results witnessed improved surface finish and enhanced material removal ability of the process and also inferred that the magnetic field-assisted EDM facilitated the process stability.     

Biophysicochemical evaluation and micropropagation study of Jatropha curcas and Ricinus communis for biodiesel production

The upcoming energy sources of Jatropha curcas and Ricinus communis promise to mitigate the energy crisis and environmental pollution belonging to the Euphorbiaceae family. Both of them have been researched in terms of availability, cost, and biochemical parameters. The seed oils of various jatropha and castor biotypes were screened out and evaluated for their physiochemical parameters viz. oil content (34–49%), biodiesel yield (30–81%), density (0.875–0.971 g/cm³), viscosity (0.6032–2.004 mm³/s), iodine value (75–450.45 mg/g), free fatty acid value (0.986–3.400 mg/g), saponification value (59.29–93.79 mg/g), flash point (133–218°C), fire point (163–262°C), fatty acid composition, and ash content (0.065–0.398%), and were estimated for comparison between jatropha and castor biotypes. Various combinations of auxins with cytokinins were used for a regeneration study. The best shoot regeneration (70%) was observed in MS medium supplemented with NAA (0.5 ppm) and BAP (2.5 ppm). Root induction (95%) was successfully obtained in plane MS. Acclimatization and hardening was quite successful with a survival rate of 70%.     

On the thermal conductivity of bimodal SiC/A356 composites fabricated via powder metallurgy route

The present study investigates the thermal conductivity of bimodal SiC particulate distribution in aluminum matrix composites fabricated via powder metallurgy route. The effects of the SiC_p reinforcement size distribution and processing parameters such as sintering time and temperature on the thermal conductivity have been examined. The Box–Behnken experimental array was employed to identify the effects of selected variables on the thermal conductivity of the composite. A reasonable augmentation in the thermal conductivity was observed with an increase in sintering time and %volume fraction of fine SiC particulates. It has been demonstrated that the matrix doped with fine SiC particulates (37?µm) occupied interstitial positions and formed continuous SiC–matrix network resulting in minimizing the micropores that contributed for good thermal conductivity, that is, 235?W/mK. Scanning electron microscopy (SEM) and x-ray diffraction (XRD) were conducted to evaluate the microstructure architecture and interfacial phase formation.