THz Detection of Biomolecules in Aqueous Environments—Status and Perspectives for Analysis Under Physiological Conditions and Clinical use

Bioanalytical THz sensing techniques have proven to be an interesting and viable tool for the label-free detection and analysis of biomolecules. However, a major challenge for THz bioanalytics is to perform investigations in the native aqueous environments of the analytes. This review recapitulates the status and future requirements for establishing THz biosensing as a complementary toolbox in the repertoire of standard bioanalytic methods. The potential use in medical research and clinical diagnosis is discussed. Under these considerations, this article presents a comprehensive categorization of biochemically relevant analytes that have been investigated by THz sensing techniques in aqueous media. The detectable concentration levels of ions, carbohydrates, (poly-)nucleotides, active agents, proteins and different biomacromolecules from THz experiments are compared to characteristic physiological concentrations and lower detection limits of state-of-the-art bioanalytical methods. Finally, recent experimental developments and achievements are discussed, which potentially pave the way for THz analysis of biomolecules under clinically relevant conditions.

     

Spurenstoffabtrennung mit keramischen Nanofiltrationsmembranen als Rotationsscheibenfilter

Reducing micropollutant pollution of water bodies is an important objective of water management and an integral part of environmental policy. Ceramic nanofiltration membranes were developed as multichannel membranes of increased membrane area and rotating disk filters. The membranes developed show retention of over 80 % for PEG 400. The membranes are currently being tested for the separation of micropollutants from wastewater contaminated with pharmaceuticals. With the help of a downstream oxidative process, the trace substances remaining in the permeate are degraded.     

Proton-Detected Solid-State NMR of the Cell-Free Synthesized α-Helical Transmembrane Protein NS4B from Hepatitis C Virus

Proton-detected 100 kHz magic-angle-spinning (MAS) solid-state NMR is an emerging analysis method for proteins with only hundreds of microgram quantities, and thus allows structural investigation of eukaryotic membrane proteins. This is the case for the cell-free synthesized hepatitis C virus (HCV) nonstructural membrane protein 4B (NS4B). We demonstrate NS4B sample optimization using fast reconstitution schemes that enable lipid-environment screening directly by NMR. 2D spectra and relaxation properties guide the choice of the best sample preparation to record 2D ¹H-detected ¹H,¹⁵N and 3D ¹H,¹³C,¹⁵N correlation experiments with linewidths and sensitivity suitable to initiate sequential assignments. Amino-acid-selectively labeled NS4B can be readily obtained using cell-free synthesis, opening the door to combinatorial labeling approaches which should enable structural studies.     

Immune Checkpoint Blockade in Advanced Cutaneous Squamous Cell Carcinoma: What Do We Currently Know in 2020?

Cutaneous squamous cell carcinoma (cSCC) is the second most common skin cancer that predominantly arises in chronically sun-damaged skin. Immunosuppression, genetic disorders such as xeroderma pigmentosum (XP), exposure to certain drugs and environmental noxae have been identified as major risk factors. Surgical removal of cSCC is the therapy of choice and mostly curative in early stages. However, a minority of patients develop locally advanced tumors or distant metastases that are still challenging to treat. Immune checkpoint blockade (ICB) targeting CTLA-4, PD-L1 and PD-1 has tremendously changed the field of oncological therapy and especially the treatment of skin cancers as tumors with a high mutational burden. In this review, we focus on the differences between cSCC and cutaneous melanoma (CM) and their implications on therapy, summarize the current evidence on ICB for the treatment of advanced cSCC and discuss the chances and pitfalls of this therapy option for this cancer entity. Furthermore, we focus on special subgroups of interest such as organ transplant recipients, patients with hematologic malignancies, XP and field cancerization.     

Engineering egress data considering pedestrians with reduced mobility

To quantify the evacuation process, evacuation practitioners use engineering egress data describing the occupant movement characteristics. These data are typically based to young and fit populations. However, the movement abilities of occupants who might be involved in evacuations are becoming more variable—with the building populations of today typically including increasing numbers of individuals: with impairments or who are otherwise elderly or generally less mobile. Thus, there will be an increasing proportion of building occupants with reduced ability to egress. For safe evacuation, there is therefore a need to provide valid engineering egress data considering pedestrians with disabilities. Gwynne and Boyce recently compiled a series of data sets related to the evacuation process to support practitioner activities in the chapter Engineering Data in the SFPE Handbook of Fire Protection Engineering. This paper supplements these data sets by providing information on and presenting data obtained from additional research related to the premovement and horizontal movement of participants with physical‐, cognitive‐, or age‐related disabilities. The aim is to provide an overview of currently available data sets related to, and key factors affecting the egress performance of, mixed ability populations which could be used to guide fire safety engineering decisions in the context of building design.     

A greedy reduced basis scheme for multifrequency solution of structural acoustic systems

The solution of frequency dependent linear systems arising from the discretization of vibro-acoustic problems requires a significant computational effort in the case of rapidly varying responses. In this paper, we review the use of a greedy reduced basis scheme for the efficient solution in a frequency range. The reduced basis is spanned by responses of the system at certain frequencies that are chosen iteratively based on the response that is currently worst approximated in each step. The approximations at intermediate frequencies as well as the a posteriori estimations of associated errors are computed using a least squares solver. The proposed scheme is applied to the solution of an interior acoustic problem with boundary element method (BEM) and to the solution of coupled structural acoustic problems with finite element method and BEM. The computational times are compared to those of a conventional frequencywise strategy. The results illustrate the efficiency of the method.     

Chemical Stability of α‐Tocopherol in Colloidal Lipid Particles with Various Morphologies

Colloidal lipid particles (CLPs) are promising encapsulation systems for lipophilic bioactives, such as oil‐soluble antioxidants that are applied in food and pharmaceutical formulations. Currently, there is no clear consensus regarding the relation between particle structure and the chemical stability of such bioactives. Using α‐tocopherol as a model antioxidant, it is shown that emulsifier type (Tween 20 or 40, or sodium caseinate) and lipid composition (tripalmitin, tricaprylin, or combinations thereof) modulated particle morphology and antioxidant stability. The emulsifier affects particle shape, with the polysorbates facilitating tripalmitin crystallization into highly ordered lath‐like particles, and sodium caseinate resulting in less ordered spherical particles. The fastest degradation of α‐tocopherol is observed in tripalmitin‐based CLPs, which may be attributed to its expulsion to the particle surface induced by lipid crystallization. This effect is stronger in CLPs stabilized by Tween 40, which may act as a template for crystallization. This work not only shows how the architecture of CLPs can be controlled through the type of lipid and emulsifier used, but also gives evidence that lipid crystallization does not necessarily protect entrapped lipophilic bioactives, which is an important clue for encapsulation system design. Practical Applications: Interest in enriching food and pharmaceutical products with lipophilic bioactives such as antioxidants through encapsulation in lipid particles is growing rapidly. This research suggests that for efficient encapsulation, the particle architecture plays an important role; to tailor this, the contribution of both the lipid carrier and the emulsifier needs to be considered.     

Indoor air quality and the associated health risk in primary school buildings in Central Europe – The InAirQ study

The indoor air quality (IAQ) was investigated in sixty-four primary school buildings in five Central European countries (Czech Republic, Hungary, Italy, Poland, and Slovenia). The concentration of volatile organic compounds, aldehydes, PM_2.5 mass, carbon dioxide, radon, as well as physical parameters were investigated during the heating period of 2017/2018. Significant differences were identified for the majority of the investigated IAQ parameters across the countries. The median indoor/outdoor ratios varied considerably. A comprehensive evaluation of IAQ in terms of potential health effects and comfort perception was performed. Hazard quotient values were below the threshold value of 1 with one exception. In contrast, 31% of the school buildings were characterized by hazard index values higher than 1. The maximum cumulative ratio approach highlighted that the concern for non-carcinogenic health effects was either low or the health risk was driven by more substances. The median excess lifetime cancer risk values exceeded the acceptable value of 1 × 10⁻⁶ in the case of radon and formaldehyde. PM_2.5 mass concentration values exceeded the 24 h and annual guideline values set by the World Health Organization in 56 and 85% of the cases, respectively. About 80% of the schools could not manage to comply with the recommended concentration value for carbon dioxide (1000 ppm).     

Influence of modern plastic furniture on the fire development in fires in homes: large‐scale fire tests in living rooms

About 80% of all fire fatalities in Germany occur because of fires in homes. It has been known for some time that modern materials (synonym for materials consisting mostly of synthetic polymers) tend to burn differently from older materials (synonym for materials consisting mostly of fibrous cellulosic substances) and it has been acknowledged that the amount of combustible plastics in homes has increased significantly over the last decades. To investigate the influence of modern furniture and ventilation conditions of fires in homes, a series of four large‐scale tests in two living rooms (LRs) with adjacent rooms (ARs) was performed by BAM and the Frankfurt fire service. Two LRs, one with older furniture and one with modern furniture, were tested twice each. Each test started with the ignition of a paper cushion on an upholstered chair. The influence of modern materials on the fire development was investigated, as well as the influence of the ventilation on the fire development. In all settings, an upholstered chair was the first burning item. Results of the test series show that fires in rooms with modern furniture develop faster than fires in rooms with older furniture. This is true for temperature development in the rooms as well as for smoke production.