Study of Adsorption/Desorption Effect of 2-Mercaptobenzothiazole as Sweet Corrosion Inhibitor on API-5L X60 Steel

Protection of Metals and Physical Chemistry of Surfaces - In this study, the inhibitive performance of 2-mercaptobenzothiazole (2MBT) and 2-aminobenzothiazole (2ABT) were investigated on API-5L X60...     

Groundwater Level Simulation Using Soft Computing Methods with Emphasis on Major Meteorological Components

Water Resources Management - Precise estimation of groundwater level (GWL) might be of great importance for attaining sustainable development goals and integrated water resources management....     

On the stability issues of switched singular time‐delay systems with slow switching based on average dwell‐time

The issue of exponential stability analysis of continuous‐time switched singular systems consisting of a family of stable and unstable subsystems with time‐varying delay is investigated in this paper. It is very difficult to analyze the stability of such systems because of the existence of time‐delay and unstable subsystems. In this regard, on the basis of the free‐weighting matrix approach, by constructing the new Lyapunov‐like Krasovskii functional, and using the average dwell‐time approach, delay‐dependent sufficient conditions are derived and formulated in terms of LMIs to check the exponential stability of such systems. This paper also highlights the relationship between the average dwell‐time of the switched singular time‐delay system, its stability, exponential convergence rate of differential states, and algebraic states. Finally, a numerical example is given to confirm the analytical results and illustrate the effectiveness of the proposed strategy. Copyright © 2012 John Wiley & Sons, Ltd.     

Facile synthesis of novel optically active poly(amide‐imide)s containing N,N′‐(pyromellitoyl)‐bis‐l‐phenylalanine diacid chloride and 5,5‐disubstituted hydantoin derivatives under microwave irradiation

Pyromellitic dianhydride (1,2,4,5‐benzenetetracarboxylic acid 1,2,4,5‐dianhydide) (1) was reacted with L‐phenylalanine (2) in a mixture of acetic acid and pyridine (3 : 2) at room temperature, then was refluxed at 90–100°C and N,N′‐(Pyromellitoyl)‐bis‐L ‐phenylalanine diacid (3) was obtained in quantitative yield. The imide‐acid (3) was converted to N,N′‐(Pyromellitoyl)‐bis‐L ‐phenylalanine diacid chloride (4) by reaction with thionyl chloride. Rapid and highly efficient synthesis of poly(amide‐imide)s (6a–f) was achieved under microwave irradiation by using a domestic microwave oven from the polycondensation reactions of N,N′‐(Pyromellitoyl)‐bis‐L ‐phenylalanine diacid chloride (4) with six different derivatives of 5,5‐disubstituted hydantoin compounds (5a–f) in the presence of a small amount of a polar organic medium that acts as a primary microwave absorber. Suitable organic media was o‐cresol. The polycondensation proceeded rapidly, compared with the conventional melt polycondensation and solution polycondensation, and was almost completed within 10 min, giving a series of poly(amide‐imide)s with inherent viscosities about 0.28–0.44 dL/g. The resulting poly(amide‐imide)s were obtained in high yield and are optically active and thermally stable. All of the above compounds were fully characterized by means of FTIR spectroscopy, elemental analyses, inherent viscosity (η_inh), solubility test and specific rotation. Thermal properties of the poly(amide‐imide)s were investigated using thermal gravimetric analysis (TGA). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 516–524, 2004     

An architecture framework for an adaptive extensible processor

To improve the performance of embedded processors, an effective technique is collapsing critical computation subgraphs as application-specific instruction set extensions and executing them on custom functional units. The problem with this approach is the immense cost and the long times required to design a new processor for each application. As a solution to this issue, we propose an adaptive extensible processor in which custom instructions (CIs) are generated and added after chip-fabrication. To support this feature, custom functional units are replaced by a reconfigurable matrix of functional units (FUs). A systematic quantitative approach is used for determining the appropriate structure of the reconfigurable functional unit (RFU). We also introduce an integrated framework for generating mappable CIs on the RFU. Using this architecture, performance is improved by up to 1.33, with an average improvement of 1.16, compared to a 4-issue in-order RISC processor. By partitioning the configuration memory, detecting similar/subset CIs and merging small CIs, the size of the configuration memory is reduced by 40%.     

The experimental and numerical impacts of geometrical parameters of conical shock tube on the function,maximum pressure and generative impulses to expose equivalent mass and behavioral equation

One of the methods to investigate the phenomenon of explosion underwater and its impact on the structures is to use the conical shock tube. These tubes produce a lot of pressure using a tiny explosive charge. In this essay, the geometry of the established/manufactured explosive shock tube is demonstrated first and the results of the experiments operating the tube is presented. Then, the explosion of a given amount of explosive charge in the conical shock tube is studied by benefiting the LS‐DYNA code. The numerical simulation is done by Lagrange‐Oiler selected multi‐materials solutions. To ensure the authenticity of the selected method in the software, the results of the stimulated model is compared with the experimental outcomes accordingly, after accrediting the accuracy of the results, the stimulating and scrutinizing the effects of geometrical parameters on the function of explosive shock tubes is proceeded. In this research, the effect of the cone head angel on the produced pressure inside the shock tube is analyzed first. Then, the function of shock tubes with different lengths is checked. Moreover, after changing the scale of the explosive charge and studying the outcome, stating the reasons for changes in each parameter and examining the effect of the relation between the explosive proportion and the water volume inside the shock tube, an equation for the equivalent mass for all sock tubes with different angels is exhibited and the existing theoretical relation is revised. Finally, by examining the pressure and impulses changes in different intervals, an equation is presented to anticipate the pressure and impulses in different shock tubes.     

Paired-wire carrying current actuators and piezoelectric beam sensors for microelectromechanical systems

Microsystem Technologies - An alternative actuator for MEMS/NEMS device is proposed and analyzed. The actuator is based on the paired-wires (PW) carrying current concept, which makes the actuator...     

PSW statistical LSB image steganalysis

Multimedia Tools and Applications - Steganography is the art and science of producing covert communications by concealing secret messages in apparently innocent media, while steganalysis is the art...