Do We Stand on Common Ground? A Threat Appraisal Model for Terror Alerts Issued by the Department of Homeland Security

The fabric and faces of threat, and the expediency and efficiency in the communication of threat, are examined with a threat appraisal model. This model is empirically tested on an ongoing communication challenge, the issuance of terror alerts by the United States' Department of Homeland Security (DHS), focusing on how threat is appraised by both the conservative and liberal audiences. Findings showed a shared view by the DHS and conservative audiences on the levels and nature of threats; liberal audiences thought otherwise. Though there appeared to be a consensus between the conservative and liberal audiences on the efficacy of threat communication, more internal consistency within DHS is needed to optimise its effectiveness.     

An Intensive Study on Assorted Substrates Suitable for High JFOM AlGaN/GaN HEMT

Silicon - The performance comparison and the temperature profile of AlGaN/GaN HEMT on different substrates are investigated. It results the maximum drain-source current (IDS) of 1.08 A/mm, 1.04...     

IR transmission prediction,processing, and characterization of dense La2Ce2O7

High-throughput computation, based on density functional theory (HT-DFT), is used to predict the bounds for optical transparency, from the ultraviolet to the infrared, for materials in the pyrochlore family. The HT-DFT approach adopted here uses an initial screening from Materials-Project database, with millions of calculated properties. Band gaps and phonon spectra were calculated from selected pyrochlore crystal structures taken from the Materials Project database. Short and long wavelength bounds for optical transparency were calculated for chemistries with stable, cubic structures. The calculations predict that La₂Ce₂O₇ has one of the broadest range of transparency for the pyrochlore family. Based on these calculations, dense polycrystalline samples of La₂Ce₂O₇ were produced by sintering and hot-isostatic pressing. Transparency was characterized by methods that did not require large samples with high optical quality, obtaining 7.15 and 7.5 µm at 95% and 90% normalized transmittance, respectively. Bandgap calculations suggest a lower bound of UV transparency cut-off of 0.3 µm. The infrared wavelength cut-off is higher than that reported for other pyrochlores, and higher than for yttria, zirconia, or other common infrared transparent ceramics. We discuss our prediction and characterization methods as well as the suitability of pyrochlores for mid- and far-infrared optical applications.     

Enforcing Efficient Equilibria in Network Design Games via Subsidies

The efficient design of networks has been an important engineering task that involves challenging combinatorial optimization problems. Typically, a network designer has to select among several alternatives which links to establish so that the resulting network satisfies a given set of connectivity requirements and the cost of establishing the network links is as low as possible. The Minimum Spanning Tree problem, which is well-understood, is a nice example.In this paper, we consider the natural scenario in which the connectivity requirements are posed by selfish users who have agreed to share the cost of the network to be established according to a well-defined rule. The design proposed by the network designer should now be consistent not only with the connectivity requirements but also with the selfishness of the users. Essentially, the users are players in a so-called network design game and the network designer has to propose a design that is an equilibrium for this game. As it is usually the case when selfishness comes into play, such equilibria may be suboptimal. In this paper, we consider the following question: can the network designer enforce particular designs as equilibria or guarantee that efficient designs are consistent with users’ selfishness by appropriately subsidizing some of the network links? In an attempt to understand this question, we formulate corresponding optimization problems and present positive and negative results.     

AdaBoost-based face detection for embedded systems

Face detection is a widely studied topic in computer vision, and recent advances in algorithms, low cost processing, and CMOS imagers make it practical for embedded consumer applications. As with graphics, the best cost-performance ratio is achieved with dedicated hardware. In this paper, we design an embedded face detection system for handheld digital cameras or camera phones. The challenges of face detection in embedded environments include an efficient pipeline design, bandwidth constraints set by low cost memory, a need to find parallelism, and how to utilize the available hardware resources efficiently. In addition, consumer applications require reliability which calls for a hard real-time approach to guarantee that processing deadlines are met. Specifically, the main contributions of the paper include: (1) incorporation of a Genetic Algorithm in the AdaBoost training to optimize the detection performance given the number of Haar features; (2) a complexity control scheme to meet hard real-time deadlines; (3) a hardware pipeline design for Haar-like feature calculation and a system design exploiting several levels of parallelism. The proposed architecture is verified by synthesis to Altera’s low cost Cyclone II FPGA. Simulation results show the system can achieve about 75–80% detection rate for group portraits.     

Structural, electrical and optical properties of Bi2Se3 and Bi2Se(3−x)Tex thin films

Thin films of Bi₂Se₃, Bi₂Se_2.9Te_0.1, Bi₂Se_2.7Te_0.3 and Bi₂Se_2.6Te_0.4 are prepared by compound evaporation. Micro structural, optical and electrical measurements are carried out on these films. X-ray diffraction pattern indicates that the as-prepared films are polycrystalline in nature with exact matching of standard pattern. The composition and morphology are determined using energy dispersive X-ray analysis and scanning electron microscopy (SEM). The optical band gap, which is direct allowed, is 0.67 eV for Bi₂Se₃ thin films and the activation energy is 53 meV. Tellurium doped thin films also show strong optical absorption corresponding to a band gap of 0.70-0.78 eV. Absolute value of electrical conductivity in the case of tellurium doped thin film shows a decreasing trend with respect to parent structure.     

Synthesis and characterisation of CuS nanomaterials using hydrothermal route

Copper sulphide (CuS) nanomaterials with interesting morphology were synthesised using copper nitrate trihydrate, thiourea and water as a solvent by a simple hydrothermal route. A systematic investigation was carried out to investigate the effect of reaction time (5, 16 and 24?h) at 150°C on the morphology of the materials. Without the use of any template or additives, shape controlled synthesis of CuS nanocrystallites were achieved. The possible mechanism for the formation of the various nanostructures of CuS in this system is discussed. The prepared materials were characterised by X-ray diffraction, field emission scanning electron microscopy (FE-SEM) and DRS-UV–Vis absorption analysis. The UV–Vis spectrum shows that it is the promising material which can absorb in the visible region and hence could be used for photocatalytic applications. In addition, the electrochemical characteristic of the synthesised material was investigated by cyclic voltammetric analysis, which shows that CuS could be used for electrocatalytic applications.     

Biosorption of Methyl violet onto palm kernel fiber: Diffusion studies and multistage process design to minimize biosorbent mass and contact time

Determination of the overall rate controlling step in the biosorption of Methyl violet dye onto a new biosorbent, palm kernel fiber has been determined. Pseudo-second-order model described the kinetics over the whole contact time period for the effect of initial concentration and temperature. Using the Wu’s approaching equilibrium factor, R_w, it was observed that the time for the switch from initial biosorption to intraparticle diffusion is affected by initial concentration and temperature. A comparison between the activation parameters of film diffusion, pseudo-second order ion exchange and intraparticle diffusion revealed that film diffusion is the overall slowest step in the biosorption process. Temperature increased the biosorption capacity but reduced slightly the rate of intraparticle diffusion, indicating that the biosorbent surface was activated by temperature which limited the diffusion of Methyl violet molecules into the interior of the biosorbent. A multistage process design to minimize mass and contact time was done.