Toward A Mechanistic Understanding of Re-Infiltration in Naturally Fractured Reservoirs with Surfactant-Aided Gravity Drainage Process

Surfactant-aided gravity drainage is an improved oil recovery technique for water-invaded zone in fractured carbonate reservoirs, which are mostly oil-wet or mixed-wet rocks. The re-infiltration mechanism in water-invaded zone has a considerable effect on oil vertical movement in gravity drainage processes. In this work, a mechanistic understanding of re-infiltration in surfactant-aided gravity drainage, in comparison to oil–water gravity drainage is presented using an experimentally and numerically validated model. A column model is constructed from three matrix blocks. These blocks are separated from each other by horizontal fractures. A storage tank is considered on top of the model to store depleted oil from matrix blocks. The stacked-blocks model for re-infiltration is validated and verified to simulate water and chemical flooding using a mesh independency study and experimental flooding data in a composite core experiment. Using this model, several analyses are performed to investigate effects of rock and fluid properties, rock saturation functions, wettability alteration, surfactant adsorption, and capillary continuity on re-infiltration.     

Defensive role ofAllium sulfur compounds for leek mothAcrolepiopsis assectella Z. (Lepidoptera) against generalist predators

It has been shown previously that sulfur volatiles produced byAllium plants affect the behavior of their specialist phytophages and of their specialist entomophages. The action of these compounds in protecting the leek mothAcrolepiopsis assectella against generalist entomophages was studied in comparison to the proposed original defensive role of these compounds against generalist herbivorous insects. Two ants species,Formica selysi andF. fusca, were used as generalist predators. Six behavioral criteria of the predatory behavior of the ants were studied in presence of the last-instar caterpillars (C₅). C₅ reared on artificial diets with or without leek components were tested, as well as C₅ soaked in frass of leek-reared caterpillars or disulfide solutions. In addition, the response of the ants to pure chemicals found in leek was studied using honey solutions with or without sulfur compounds. The sulfur allelochemicals ofAllium plants have a negative action on predatory ants. Interestingly, the nonvolatile precursors of sulfur volatiles ofAllium plants seem to have a protective role for their phytophagous insects against generalist entomophages.     

Dynamics of localizable entanglement in a qutrit chain with Dzyaloshinskii–Moriya interaction

Dynamics of localizable entanglement in a qutrit chain, in the presence of the Dzyaloshinskii–Moriya (DM) interaction is studied. Three distinct initial states, namely, superposition of the ground and the first excited state (SGE), a GHZ state and a superposition of qutrit coherent states (SQCS) are considered in this investigation. While the ground and the first excited state exhibit the maximum of entanglement, the latter is diminished for any superposition of the states. In both SGE and GHZ cases, localizable entanglement (LE) oscillates and its period is a decreasing function of the ratio of the strength of DM interaction and the spin coupling constant (DS ratio), but its maximum value is independent of the latter. In SQCS case, LE also oscillates in time at small values of DS ratio; its average is reduced as the strength of the DM interaction increases and gains its maximum average and the highest peaks at a specific value of the coherence parameter.     

A case study validation of a knowledge-based approach for the selection of requirements engineering techniques

Requirements engineering (RE) is a critical phase in the software engineering process and plays a vital role in ensuring the overall quality of a software product. Recent research has shown that industry increasingly recognizes the importance of good RE practices and the use of appropriate RE techniques. However, due to the large number of RE techniques, requirements engineers find it challenging to select suitable techniques for a particular project. Unfortunately, technique selection based on personal experience has limitations with regards to the scope, effectiveness and suitability of the RE techniques for the project at hand. In this paper, a Knowledge-based Approach for the Selection of Requirements Engineering Techniques (KASRET) is proposed that helps during RE techniques selection. This approach has three major features. First, a library of requirements techniques was developed which includes detailed knowledge about RE techniques. Second, KASRET integrates advantages of different knowledge representation schemata and reasoning mechanisms. Thus, KASRET provides mechanisms for the management of knowledge about requirements techniques and support for RE process development. Third, as a major decision support mechanism, an objective function evaluates the overall ability and cost of RE techniques, which is helpful for the selection of RE techniques. This paper makes not only a contribution to RE but also to research and application of knowledge management and decision support in process development. A case study using an industrial project shows the support of KASRET for RE techniques selection.

Effect of Iron sulfate as electrolyte additive on plasma electrolytic oxidation of aluminum alloy

This study has been carried out to investigate the incorporation of Iron(II) sulfate as an additive of electrolyte on formed AA1010 aluminum alloy, using plasma electrolytic oxidation method in silicate-based electrolytes containing Iron(II) sulfate. In order to fabricate nanocomposite coating, silicon nitride nanopowder was added to electrolyte. The effects of iron(II) sulfate additive on the voltage-time trend, microstructure, compositions, wear, and corrosion resistances of PEO coatings were investigated. In addition, current density and concentration of additive were studied as parameters that were effective on coating. Results showed that although FeSO₄ enters to the coating structure, but it does not develop a new phase. The corrosion and wear behavior of coated samples with FeSO₄ indicate an improvement as compared to those without additive.     

Investigation of the microstructure and oxidation behavior of Cr-modified aluminide coatings on γ-TiAL alloys

The microstructure and oxidation behavior of aluminide coatings are investigated. The layers are examined by the optical microscopy, scanning electron microscopy (SEM) equipped with EDS, and the X-ray diffraction method. The isothermal oxidation behaviors of samples are investigated at 950°C for 200 h. The results show that TiAl₃ is formed on the substrate. In addition, the aluminide coating improves the oxidation resistance of γ-TiAl alloys by forming a protective alumina scale. Moreover, during oxidation treatment, the interdiffusion of the TiAl₃ layer with γ-TiAl substrate results in the depletion of aluminum in the TiAl₃ layer and the growth of the TiAl₂ layer. After the oxidation treatment, the coating layer preserves a microstructure with phases including TiAl₃, TiAl₂, and Al₂O₃.     

Extended Algorithms for Approximating Variable Order Fractional Derivatives with Applications

This paper proposes accurate and robust algorithms for approximating variable order fractional derivatives of arbitrary order. The proposed schemes are based on finite difference approximations. We compare the performance of algorithms by introducing a new formulation of experimental convergence order. Two initial value problems are considered and solved by means of the proposed methods. Numerical results are provided justifying the usefulness of the proposed methods.     

Roll bonding of AA5052 and polypropylene sheets: Bonding mechanisms,microstructure and mechanical properties

Structural, microstructural and mechanical properties in roll bonding of AA5052 and polypropylene sheets have been evaluated in this study. The surface roughness of the AA5052 sheets, rolling temperature and the surface energy of polymer were selected as the bonding variables. The findings indicated that an increase in the surface energy of polypropylene by grafting maleic anhydride would result in higher bonding strength due to chemical interaction between the AA5052 and the maleic anhydride grafted polypropylene (PP-g-MAH). In fact, this reaction caused the formation of an interphase layer at the polymer side of the interface and the diffusion of aluminum into the PP-g-MAH layer. It was also observed that an increase in the rolling temperature increases bonding strength because the polymer penetrates the AA5052 surface irregularities more easily, the PP-g-MAH molecules move more smoothly toward the AA5052 surface, and finally there are more chemical interactions among the layers. An Increase in the bonding strength through increasing the AA5052 surface roughness was attributed to an increase of the van der Waals force and more interaction surface among the layers along with higher mechanical interlocking in the shear tension test.     

SiAlON–epoxy nanocomposite coatings: Corrosion and wear behavior

In this study, epoxy powder as a matrix was combined with different contents of silicon–aluminum–oxygen–nitrogen (SiAlON) nanoparticles using a planetary ball mill. Pure epoxy and nanocomposite powders were applied on the surface of plain carbon steel components by the electrostatic spraying method. Curing of the coatings was done in an oven or microwave for the appropriate time. The coating structure and morphology of the SiAlON nanoparticles were studied by scanning electron microscopy and transmission electron microscopy, respectively. The corrosion properties of the coatings were assessed by immersion, Tafel polarization, and electrochemical impedance spectroscopy tests in 3.5% NaCl solution. The results show that addition of 10 wt % SiAlON nanoparticles markedly increases the corrosion resistance of epoxy coatings. Thus, it can be inferred that the corrosion rate of these coatings is 15 to 18 times lower than that of pure epoxy samples and 8 to 11 times lower than coatings with 20 wt % SiAlON. The higher corrosion resistance of nanocomposite coatings can be attributed to the barrier properties of SiAlON nanoparticles. The tribological performance of the coatings was studied with the pin‐on‐disk test. The results of wear testing show that the samples containing 10 wt % SiAlON provide about five times more wear resistance than pure ones and about two times more than coatings with 20 wt % SiAlON. However, the coefficient of friction for nanocomposite coatings is reduced about 50% compared to the pure sample. Also, the curing process in either regime (oven or microwave) has the same effect on the corrosion and wear properties, and the coatings are completely crosslinked. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43855.     

Modeling managerial behavior in real options valuation for project-based environments

Project valuation, as a decision-making tool for initiating investments in projects, should be able to value project flexibilities and incorporate reasonable risk preferences of relevant decision makers. Real options valuation methods are the available approaches for valuing project flexibilities, whereas they have shortcomings in considering managers’ reasonable risk preferences in project decisions. Therefore, researchers have suggested approximating the perspective on risk of real options methods and practitioners in project management. This study proposes a fair real options valuation for project-based environments by a behavioral economic approach, which adopts binomial lattice method, Monte-Carlo simulation, and cumulative prospect theory. The results show that behavioral factors such as ‘risk attitude’ and ‘loss aversion’ should be accepted in project investment decisions while limited to an acceptable amount depending on the project conditions (e.g. uniqueness of decision-making scenarios). This research contributes to the project management domain by enhancing project investment decisions that include project flexibilities.