Finite-difference time-domain simulation of scattering from objectsin continuous random media

A three-dimensional (3D) finite-difference time-domain (FDTD) scheme is introduced to model the scattering from objects in continuous random media. FDTD techniques have been previously applied to scattering from random rough surfaces and randomly placed objects in a homogeneous background, but little has been done to simulate continuous random media with embedded objects where volumetric scattering effects are important. In this work, Monte Carlo analysis is used in conjunction with FDTD to study the scattering from perfectly electrically conducting (PEC) objects embedded in continuous random media. The random medium models under consideration are chosen to be inhomogeneous soils with a spatially fluctuating random permittivities and prescribed correlation functions. The ability of frequency averaging techniques to discriminate objects in this scenarion is also briefly investigated. The simulation scheme described in this work can be adapted and used to help in interpreting the scattered field data from targets in random environments such as geophysical media, biological media, or atmospheric turbulence     

Static and free vibration analysis of variable-depth bridges of arbitrary alignments using the isoparametric spline finite strip method

The isoparametric spline finite strips for shells are employed to solve static and free vibration problems of variable-depth bridges of arbitrary alignments. Using this approach, a continuous bridge is first split up into substructures. Each substructure is modelled as an assemblage of isoparametric spline finite strips. Compatibility between substructures is ensured by suitable transformation at the interface. The presence of support diaphragms and bearings can also be accounted for. This method retains the computational efficiency of the spline finite strip method while it is much more flexible in geometric modelling. Solutions of this method are compared with other available solutions, and good agreement is observed.     

Quantitative studies on the movement of fluid and lymphocytes through periodontal tissue and into the draining lymph.

Chronic lymph drainage techniques in sheep have been used to map the pathways and to quantify the fluid and cell traffic through periodontal tissues. The continuous collection of cervical and prescapular lymph has demonstrated that 65% of labelled protein tracer injected into the periodontal tissues could be found in lymph over a period of 7.5 hours. Nearly 90% of the total radioactivity could be accounted for between the lymph and the tissue site. When silk was impregnated with radiolabelled albumin and a tooth ligated, the kinetics of the subsequent appearance of the tracer in lymph emphasized the ease with which macromolecules surrounding the teeth gain access to the lymphatics, regional lymph nodes, and immune apparatus. Animals were primed with BCG and then tuberculin (delayed hypersensitivity) lesions were simultaneously induced in the skin, bowel, and periodontium. When T cells were labelled with radioisotopes and their migration from blood to lymph measured, the periodontal tissue traffic pattern was distinct from the traffic pattern through DTH in the skin and also distinct from the pattern through the small intestine. This indicates that the lymphocyte traffic through the inflamed periodontium has unique features. This tissue specificity was not apparent when lesions were induced with TNFalpha. The static assessment of lymphocyte subsets within the tissues was also assessed with immunohistochemistry.     

Effect of lamellar spacing on microstructural instability and creep behavior of a lamellar TiAl alloy

Finer lamellar spacing in the lamellar structure of a Ti–45Al–2Nb–2Mn + 0.8 vol.%TiB₂ (45XD) alloy does improve the primary creep resistance. However, the unstable nature of the fine plate contributes largely to the degradation of the lamellar structure and a rapid increase in the tertiary creep rate, indicating that a fine lamellar structure has a detrimental effect on the long-term creep.     

Pulse study of methane partial oxidation to syngas over SiO2-supported nickel catalysts

Methane was pulsed over pure CuO and NiO as well as Cu/La₂O₃ and Ni/La₂O₃ catalysts at 600° C. Results indicate that the mechanisms for methane activation over copper and nickel are quite different. Over CuO, methane is converted to CO₂ and H₂O, most likely via the combustion mechanism; whereas metallic copper does not activate methane. Over NiO in the presence of metallic nickel sites, methane activation follows the pyrolysis mechanism to give CO, CO₂, H₂ and H₂O. Similar results were obtained over the Cu/La₂O₃ and Ni/La₂O₃ catalysts. XRD investigations indicate that copper and nickel existed as CuLa₂O₄ and LaNiO₃ respectively in the La₂O₃-supported catalysts. The effect of La₂O₃ on the activation of methane is discussed.     

Pulse studies of CH4 interaction with NiO/Al2O3 catalysts

Pulse studies of the interaction of CH₄ and NiO/Al₂O₃ catalysts at 500°C indicate that CH₄ adsorption on reduced nickel sites is a key step for CH₄ oxidative conversion. On an oxygen-rich surface, CH₄ conversion is low and the selectivity of CO₂ is higher than that of CO. With the consumption of surface oxygen, CO selectivity increases while the CO₂ selectivity falls. The conversion of CH₄ is small at 500°C when a pulse of CH₄/O₂ (CH₄O₂=21) is introduced to the partially reduced catalyst, indicating that CH₄ and O₂ adsorption are competitive steps and the adsorption of O₂ is more favorable than CH₄ adsorption     

Terabit optical local area networks for multiprocessing systems

The design of a scalable optical local area network formultiprocessing systems is described. Each workstation has aparallel-fiber-ribbon optical link to a centralized complementarymetal-oxide silicon (CMOS) switch core, implemented on a singlecompact printed circuit board (PCB). When the Motorola Optobusfiber technology is used, each workstation has a data bandwidth of 6.4Gbits/s to the core. A centralized switch core interconnecting 32workstations supports a 204-Gbit/s aggregate data bandwidth. Theswitch core is based on a conventional broadcast-and-selectarchitecture, implemented with parallel CMOS integrated circuits(IC's). The switch core scales well; by incorporation of theCMOS optoelectronic IC's with optical input-output, the electricalcore can be reduced to a single-chip optoelectronic IC with terabitcapacities. A prototype of an optoelectronic switch core has been fabricated and is described. The appeal of the architectureincludes its reliance on commercially available parallel-fibertechnology, its reliance on the well-developed markets of local areanetworks and networks of workstations, and its smooth scalability from the electrical to optical domains as technology matures.