Dual detection biosensor based on porous silicon substrate

Due to the high surface-to-volume ratio (hundreds of m²/cm³) porous silicon became during the last years a good candidate material as substrate for biosensor application. Moreover, the versatility of surface chemistry allows different functionalization approaches and large number of molecules to be captured on well-defined areas. This paper reports a dual detection method for protein recognition processes developed on different nanostructured porous silicon (PS) substrates, based on using two complementary spectroscopic techniques: fluorescence and electrochemical impedance. The structures were tested for biomolecular recognition – biotin–strepavidin couples – in order to achieve an optimum surface for protein's immobilizations. Comparative analyses of the attachment degree and preservation of the biomolecules activity on the porous silicon surfaces and silicon slides are also described.     

Altering the emission properties of conjugated polymers

Many technological applications that have had tremendous impact on our society and lifestyle are exploiting the emission properties of organic species such as conjugated polymers and organic small‐molecule semiconductors. The most prominent case‐in‐point here are possibly organic light‐emitting diodes, which have found use in information displays, touch screens and beyond. To further advance the rapid development of these powerful and versatile technologies, it will be of paramount importance to gain fundamental insights about which strategies and processes we can employ to alter, control and eventually enhance the emission properties of this interesting class of material. In this work, we focus on macromolecular systems and review the most important categories of tools that can be employed to efficiently alter their emission properties by manipulating their molecular architecture and electronic structure; by influencing their molecular ordering, packing motifs and overall microstructure; as well as by utilizing the ability of some of these materials to respond to external stimuli and other physical parameters (pressure, light exposure etc.) and/or to interact with other compounds, including systems of different functionalities. © 2015 Society of Chemical Industry     

Can newborns discriminate between their own cry and the cry of another newborn infant?

Two experiments were conducted to test whether newborns could discriminate between their own cry and the cry of another newborn infant. Facial behavior and nonnutritive sucking rate were adopted as dependent measures. In Experiment 1, 20 newborns in an awake state were presented with either their own cry or the cry of another infant. In the latter condition, newborns showed the facial expression of distress more frequently and for a longer duration. In addition, the rate of sucking decreased significantly between the pretest phase and the 1st min of presentation of another infant's cry. Newborns' responses, although delayed and less intense, showed a similar trend in Experiment 2, during which 20 newborns in a sleep state were tested with the same procedure. These results indicate the newborns' capability to discriminate between the 2 cry stimuli and show the effectiveness of a newborn cry in inducing distress signals in another newborn infant. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Femtosecond Carrier Dynamics in In2O3 Nanocrystals

We have studied carrier dynamics in In₂O₃ nanocrystals grown on a quartz substrate using chemical vapor deposition. Transient differential absorption measurements have been employed to investigate the relaxation dynamics of photo-generated carriers in In₂O₃ nanocrystals. Intensity measurements reveal that Auger recombination plays a crucial role in the carrier dynamics for the carrier densities investigated in this study. A simple differential equation model has been utilized to simulate the photo-generated carrier dynamics in the nanocrystals and to fit the fluence-dependent differential absorption measurements. The average value of the Auger coefficient obtained from fitting to the measurements was γ = 5.9 ± 0.4 × 10⁻³¹ cm⁶ s⁻¹. Similarly the average relaxation rate of the carriers was determined to be approximately τ = 110 ± 10 ps. Time-resolved measurements also revealed ~25 ps delay for the carriers to reach deep traps states which have a subsequent relaxation time of approximately 300 ps.     

Bioactive polymers LVII. A novel drug delivery system based on 5-nitro-2-furaldehyde-semicarbazone and poly(acrylic acid-co-vinyl alcohol)

The coupling of 5-nitro-2-furaldehyde-semicarbazone on to poly(acrylic acid-co-vinyl alcohol) copolymer by the use of dicyclohexylcarbodiimide as activator has been studied. On the basis of an experimental design, the influence of different parameters is studied (activator/support, drug/support, reaction time, solvent volume) in order to determine the optimum conditions for obtaining the maximum amount of the coupled drug on the support.     

Corrigendum

Presented in part at the 58th Annual Meeting of the American Academy of Dermatology, 2000, and at the Annual Scientific Meeting of the Society of Cosmetic Chemists, December 2000 Assays of moisturizer efficacy have traditionally focused on a moisturizer's ability to alleviate dry skin. More recently, a moisturizer's ability to prevent primary irritation has been recognized. To assess and compare the ability of moisturizers to alleviate skin dryness and primary irritation, as well as prevent their return, four controlled-application clinical ( in vivo ) studies were carried out: hand-wash test, regression test, reduction in pre-existing irritation study, and prevention-of-irritation studies. Overall conclusions were confirmed in a home-use clinical (validation) study of people suffering from mild eczema. The controlled in vivo studies demonstrate that: (a) a moisturizer can alleviate skin dryness and irritation, and prevent their return; and (b) the efficacy of different moisturizers can be differentiated, based on their composition. The home-use study results demonstrated that the most effective moisturizer identified by the controlled-application studies was highly effective against the signs of eczema. In vivo modelling of moisturizer efficacy enables assessment and optimization of different benefits separately, while predicting the quantitative and perceived (observed) relevance of the benefits the moisturizer delivers to consumers.     

Novel (Phenothiazinyl)Vinyl-Pyridinium Dyes and Their Potential Applications as Cellular Staining Agents

We report here the synthesis and structural characterization of novel cationic (phenothiazinyl)vinyl-pyridinium (PVP) dyes, together with optical (absorption/emission) properties and their potential applicability as fluorescent labels. Convective heating, ultrasound irradiation and mechanochemical synthesis were considered as alternative synthetic methodologies proficient for overcoming drawbacks such as long reaction time, nonsatisfactory yields or solvent requirements in the synthesis of novel dye (E)-1-(3-chloropropyl)-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium bromide 3d and its N-alkyl-2-methylpyridinium precursor 1c. The trans geometry of the newly synthesized (E)-4-(2-(7-bromo-10-ethyl-10H-phenothiazin-3-yl)vinyl)-1-methylpyridin-1-ium iodide 3b and (E)-1-methyl-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium tetrafluoroborate 3a′ was confirmed by single crystal X-ray diffraction. A negative solvatochromism of the dyes in polar solvents was highlighted by UV-Vis spectroscopy and explanatory insights were supported by molecular modeling which suggested a better stabilization of the lowest unoccupied molecular orbitals (LUMO). The photostability of the dye 3b was investigated by irradiation at 365 nm in different solvents, while the steady-state and time-resolved fluorescence properties of dye 3b and 3a′ in solid state were evaluated under one-photon excitation at 485 nm. The in vitro cytotoxicity of the new PVP dyes on B16-F10 melanoma cells was evaluated by WST-1 assay, while their intracellular localization was assessed by epi-fluorescence conventional microscopy imaging as well as one- and two-photon excited confocal fluorescence lifetime imaging microscopy (FLIM). PVP dyes displayed low cytotoxicity, good internalization inside melanoma cells and intense fluorescence emission inside the B16-F10 murine melanoma cells, making them suitable staining agents for imaging applications.     

GBR with an e-PTFE membrane associated with DFDBA: histologic and histochemical analysis in a human implant retrieved after 4 years of loading

As a result of a fracture to the cemented post and core, a pure titanium implant was extracted from a 54-year-old patient after 4 years of clinical loading. At implantation, the implant was positioned into an extraction socket and the defect was treated with an e-PTFE membrane associated with a DFDBA graft. At retrieval the implant underwent histologic and histochemical examination to assess the characteristics of the regenerated bone after 4 years of prosthetic loading. The implant showed an angular bony defect at the smooth collar, but the bone-implant direct contact rate seemed to be elevated in the remaining implant surface. Normal transmitted and polarized light examinations demonstrated that most of the DFDBA particles were resorbed and substituted by vital newly formed bone. The regenerated bone appeared compact with secondary osteons and large haversian canals; however, some partially mineralized remnants residuated in the spaces, between the osteons. Within the limits of this study, the authors concluded that DFDBA can be substituted by the host bone, but the rate of substitution is very slow and not complete after 4 years. From a clinical point of view, however, the load-bearing capacity of the bone regenerated with the membrane technique associated with DFDBA appeared to be similar to that of normal bone.     

Vertical ridge augmentation around dental implants using a membrane technique and autogenous bone or allografts in humans

This study investigated the effect on vertical bone regeneration of the addition of demineralized freeze-dried bone allograft or autogenous bone chips to a membrane technique. Twenty partially edentulous patients with vertical jawbone deficiencies were selected for this study. The patients were divided into two groups of 10 individuals. The 10 patients of Group A received 26 Br?nemark implants in 10 surgical sites. The 10 patients of Group B received 32 implants in 12 surgical sites. Fifty-two out of 58 implants (22 in Group A and 30 in Group B) extended 1.5 to 7.5 mm superior to the bone crest. Titanium-reinforced expanded polytetrafluoroethylene membranes were used to cover the implants and, before complete membrane fixation, demineralized freeze-dried bone allograft particles were condensed under the membrane in Group A, and autogenous bone chips were used in Group B. At the reentry after 7 to 11 months the membranes were removed and a small biopsy was collected from 11 sites comprehending the miniscrews. The clinical measurements from Group A demonstrated a mean vertical bone gain of 3.1 mm (SD = 0.9 mm, range 1 to 5 mm) with a mean percentage of bone gain of 124% (SD = 46.6%). The measurements from Group B showed a mean vertical bone gain of 5.02 mm (SD = 2.3 mm, range 1 to 8.5 mm) with a mean percentage of bone gain of 95% (SD = 26.8%). Histomorphometric analysis of the present study clearly demonstrated a direct correlation between the density of the pre-existing bone and the density of the regenerated bone. The mean percentage of new bone-titanium contact was from 39.1% to 63.2%, depending on the quality of the pre-existing bone. Both the clinical and histologic results indicate a beneficial effect of the addition of demineralized freeze-dried bone allograft or autogenous bone particles to vertical ridge augmentation procedures in humans.     

Face preference at birth

Four experiments are reported that were aimed at elucidating some of the controversial issues concerning the preference for facelike patterns in newborns. The experiments were devised to contrast the original and the revised versions of the sensory hypothesis and the structural hypothesis as accounts of face preference in newborns. Experiments 1A and 1B supported the structural hypothesis by showing a visual preference for the stimulus for which components were located in the correct arrangement for a human face. Experiment 2 supported the sensory hypothesis by showing a visual preference for stimuli that were designed to have the optimal spatial frequency components for the newborn visual system. Experiment 3 showed that babies directed attention to a facelike pattern also when it was presented simultaneously with a nonfacelike stimulus with optimal spatial frequency for the newborn visual system.