In-vitro evaluation of wollastonite nanopowder produced by a facile process using cheap precursors for biomedical applications

Wollastonite nanopowder (β-CaSiO₃) is the most nanoceramic powder that is most frequently applied in biomedical applications due to its good bioactivity and biocompatibility. Although the preparation of wollastonite in a solid-state is distinguished as a simple and cheap method with large-scale production, it requires high temperatures (=1400 °C) and consumes quite a long time. The wet methods are considered the best when it comes to preparing the wollastonite nanopowders. However, it has some drawbacks such as its extravagant raw materials and its shorting in preparation which inhibits successful coverage for large-scale production. Herein facile, one-pot modified co-precipitation approach with an easy procedure, shorter reaction time, and in-expensive precursor sodium meta-silicate-pentahydrate and CaCO₃ has been utilized for large-scale production of wollastonite nano-powders (76–150 nm). The precipitated product was calcined at different temperatures (800, 900, 1000, and 1100 °C). The phase composition and microstructure of the calcined powders were investigated. They were analyzed by XRD, FTIR, FESEM, and HRTEM. The in-vitro bioactivities of the calcined powders at 1000 &1100 °C were investigated by analyzing their abilities to form apatite on their surface after 21 days in SBF. The apatite mineralization of the powder surfaces was examined through FESEM, EDX, and Raman spectra. The results show that a single-phase wollastonite got formed at all calcined temperatures with a unique silkworm texture. SBF in-vitro test states the formation of HA on the powder surface. Therefore, these powders are expected to be valuable and promising for biomedical applications such as coating and bio cement.     

Evolution of the electrical resistivity at rest and during oscillatory shearing of co-continuous morphology (PP/PMMA)/MWCNT systems

In this work, a modified parallel-disks configuration on a strain-controlled ARES rheometer (TA Instrument) was used to study the evolution of the electrical resistivity at rest and during oscillatory shearing of a co-continuous immiscible polymer blend morphology based on polypropylene and /polymethyl(methacrylate) (PP/PMMA) in which various amounts (0–3 wt%) of multiwall carbon nanotubes (MWCNT) were added. The co-continuity of both PP and PMMA phases allowed the buildup of a conductive network due to the preferential localization of the conductive MWCNT at the interface between PP and PMMA. Under a stepwise increase of the oscillatory strain amplitude below a critical value (γ_c = 6.3%), a significant decrease in the electrical resistivity was observed for MWCNT concentrations above the percolation threshold (0.3 wt%) due to the conductive paths induced by both thermal (Brownian) motion and oscillatory shearing. However, for deformation amplitudes higher than γ_c, the resistivity increased due to the destruction of the MWCNT paths induced by the large deformation imposed on the PP/PMMA interface. These observations were also confirmed by the evolution of the storage modulus (G′) which remained constant for γ_c < 6.3% (linear viscoelastic regime), while the values decreased above γ_c due to the destruction of the system's morphology.     

Rapid Synthesis and Antiproliferative Properties of Polyazamacrocycle-Based Bi- and Tetra-Gold(I) Phosphine Dithiocarbamate Complexes

A family of bi- and tetrametallic gold(I) phosphine dithiocarbamate complexes were synthesized, starting from cyclam and dimethylcyclam polyazamacrocycles, respectively, along with their monometallic gold(I) chloridophosphine precursors. Their antiproliferative properties were evaluated on two cancer cell lines (A549 and NSCLC-N6-L16). Most of the mono- and bimetallic complexes displayed strong activities and, in particular, one bimetallic derivative showed antiproliferative properties in the low micromolar range. Insights into the structure–activity relationships are given, along with determination of the thioredoxin reductase inhibition potential, two-photon imaging of the fluorescent derivatives, and evaluation of gold uptake.     

Chaos-Based transmitted-reference ultra-wideband communications

Transmitted-reference (TR) ultra-wideband (UWB) communication systems have gained increasing popularity for the usage in the low data rate application, due to its non-coherent receiver structure. In conventional TR system, non-coherency at the receiver is achieved by sending reference pulses prior to the data-bearing pulses. Then, at the receiver side, reference pulses are used as template signals for correlation with data-bearing pulses. Therefore, the orthogonality between reference and data pulses is obtained in time division multiple access (TDMA) fashion. However, the implementation of a wideband delay line is very difficult in the current low power integrated circuits. In this paper, a TR method called Chaos-Based TR (CB-TR) is proposed. In the proposed method, chaotic sequences are used to separate the reference and data pulses. Such approach exploits the benefits of chaotic signals, such as non-periodicity, easy-to-generate, impulse-like autocorrelation value and low cross-correlation value. Furthermore, in order to decrease the influence of some negative properties of conventional chaotic maps, a modified chaotic generator (MCS) is proposed. Simulation results over the IEEE 802.15.4a channel model show comparable bit error rate performance to other TR methods.     

Pulsed laser reshaping and fragmentation of upconversion nanoparticles — from hexagonal prisms to 1D nanorods through “Medusa”-like structures

One dimensional (1D) nanostructures attract considerable attention, enabling a broad application owing to their unique properties. However, the precise mechanism of 1D morphology attainment remains a matter of debate. In this study, ultrafast picosecond (ps) laser-induced treatment on upconversion nanoparticles (UCNPs) is offered as a tool for 1D-nanostructures formation. Fragmentation, reshaping through recrystallization process and bioadaptation of initially hydrophobic (β-Na_1.5Y_1.5F₆: Yb³⁺, Tm³⁺/β-Na_1.5Y_1.5F₆) core/shell nanoparticles by means of one-step laser treatment in water are demonstrated. “True” 1D nanostructures through “Medusa”-like structures can be obtained, maintaining anti-Stokes luminescence functionalities. A matter of the one-dimensional UCNPs based on direction of energy migration processes is debated. The proposed laser treatment approach is suitable for fast UCNP surface modification and nano-to-nano transformation, that open unique opportunities to expand UCNP applications in industry and biomedicine.

     

Phase-Structural and Electrochemical Properties of La2MgNi9 Alloys

Powder Metallurgy and Metal Ceramics - Multiphase La 2 MgNi 9 alloys are synthesized by induction melting. The crystalline structures of all phases in the alloys are determined with X-ray...     

Thermally stable cellular poly(vinylidene) ferroelectrets: Optimization of CO2 driven inflation process

Electrically charged cellular ferroelectrets can show excellent thermally stable piezoelectric activity and are therefore progressively used in electrochemical transducers. Given that an optimized cellular structure is a key for improving charge density and the associated piezoelectric properties in this material, we investigated the influence of CO₂ inflation treatment using various gas diffusion expansion or inflation procedures on the piezoelectric d₃₃ coefficient and thermal stability of cellular poly(vinylidene) ferroelectrets and compare with the results (partially) obtained by N₂ inflation as reported in our previous study (Jahan, Mighri, Rodrigue, Ajji, J. Appl. Polym. Sci. 2019, 136, 47540). Samples were prepared using the conventional extrusion–stretching–inflation–corona charging method. Maximum d₃₃ coefficient for CO₂-inflated samples is found to be around 30% higher than that of N₂-inflated samples (327 pC/N compared to 251 pC/N) by stepwise pressure application method. The key parameters addressed in the inflation procedures are the changes in sample thickness, morphology, and the void-height distribution in both gas treatments. The ferroelectrets show excellent thermal stability for up to 4 days at 90, 110, and 120 °C in both treatments with a slightly improved performance in CO₂ gas. The higher activation energy of CO₂-inflated samples (0.52 eV) than the N₂-inflated ones (0.43 eV) further confirms the stability data. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47929.