Heterogeneously Catalyzed Methanolysis of Gmelina Seed Oil to Biodiesel

The heterogeneous catalysis of transesterification of gmelina seed oil to biodiesel is evaluated. The oil was extracted from the seeds with n‐hexane by solvent extraction and characterized to determine its physiochemical properties. Response surface methodology was applied to optimize the effect of process variables on the biodiesel yield. The base‐activated clay catalyst performed as montmorillonite clay with the characteristic property of a Brønsted acid. It has an improved surface area after activation that enhanced its catalytic activity on transesterification reaction. Under optimal conditions, the biodiesel yield was 70.1 %, thus demonstrating that the model predicted well the biodiesel production.     

Computational investigation of hydraulic performance variation with geometry in gabion stepped spillways

Over recent years, there has been a clear increase in the frequency of reported flooding events around the world. Gabion structures offer one means of flood mitigation in dam spillways. These types of structures provide an additional challenge to the computational modeller in that flow through the porous gabions must be simulated. We have used a computational model to investigate the flow over gabion stepped spillways. The model was first validated against published experimental results. Then, gabion stepped spillways with four different step geometries were tested under the same conditions in order to facilitate inter-comparisons and to choose the best option in terms of energy dissipation. The results show that normal gabion steps can dissipate more energy than overlap, inclined, and pooled steps. An intensive set of tests with varying slope, stone size, and porosity were undertaken. The location of the inception point and the water depth at this point obtained from this study were compared with those from existing formulae. Two new empirical equations have been derived, on the basis of a regression analysis, to provide improved results for gabion stepped spillways.     

Digital Extraction Column: Measurement and Modeling Techniques

The digitization of extraction columns requires a profound knowledge of the present hydrodynamics/mass transport interaction as well as appropriate measurement techniques for the detection of relevant input and target values. In this article, the different techniques for droplet size distribution as well as concentration determination are presented and new methods for online evaluation are discussed. In combination with the simulation of droplet size, holdup and solute concentration distribution, an online-capable process tool for controlling and optimizing extraction columns will be obtained.     

Experimental and numerical analysis of the influence of cable tray arrangements on the resulting mass loss rate and fire spreading

In the context of industrial buildings and power plants, electrical installations and cable trays represent a main fuel load and a potential initial fire source due to possible short circuits or comparable malfunction. Furthermore, a fire can spread from one tray to additional trays mounted above and/or horizontally on one tray. Because of the high significance of cable fires, several research projects have been carried out, investigating the fire behaviour of cables from small‐scale tests, eg, the cone calorimeter, up to large‐scale tests, analysing complete cable tray constructions. The goal of the work presented in this paper is the extension of the knowledge regarding the influence of geometrical parameters like the packing density and tray distance on the burning behaviour and fire spread of cable tray installations. The results are considered, together with test results from the literature, to quantify the main physical parameters describing the burning behaviour. In a next step, the general applicability of these parameters as input data for the parametrization of the source term of numerical simulations is shown. The test results show that the burning behaviour and the fire spreading highly depend on the cable arrangement of the cables on the cable tray, in combination with other boundary conditions. By applying the results as input for a fire simulation, the mass loss rate is considered appropriately.     

Optimisation of cogeneration system and fuel inventory with automated targeting model

Clean Technologies and Environmental Policy - Industrial wastes can be used as alternative fuel sources for the substitution of fossil fuel if they contain good calorific values. Through...     

Cell-envelope proteinases from lactic acid bacteria: Biochemical features and biotechnological applications

Proteins displayed on the cell surface of lactic acid bacteria (LAB) perform diverse and important biochemical roles. Among these, the cell-envelope proteinases (CEPs) are one of the most widely studied and most exploited for biotechnological applications. CEPs are important players in the proteolytic system of LAB, because they are required by LAB to degrade proteins in the growth media into peptides and/or amino acids required for the nitrogen nutrition of LAB. The most important area of application of CEPs is therefore in protein hydrolysis, especially in dairy products. Also, the physical location of CEPs (i.e., being cell-envelope anchored) allows for relatively easy downstream processing (e.g., extraction) of CEPs. This review describes the biochemical features and organization of CEPs and how this fits them for the purpose of protein hydrolysis. It begins with a focus on the genetic organization and expression of CEPs. The catalytic behavior and cleavage specificities of CEPs from various LAB are also discussed. Following this, the extraction and purification of most CEPs reported to date is described. The industrial applications of CEPs in food technology, health promotion, as well as in the growing area of water purification are discussed. Techniques for improving the production and catalytic efficiency of CEPs are also given an important place in this review.     

Hydromorphological,hydraulic and ecological effects of restored wood: findings and reflections from an academic partnership approach

Large wood (re)introduction can deliver multiple benefits in river restoration, but there is a dearth of the detailed and longer‐term post‐project monitoring and evaluation required for improving best practice. We present findings from an academic partnership approach to post‐project evaluation, based on successive MSc research projects on restored large wood in the Loddon catchment, UK. Field and modelling data reveal: (i) key differences in large wood features between restored and natural reaches; (ii) increased hydraulic retention and changes to mesohabitats associated with large wood; (iii) differences in macroinvertebrate community composition around large wood but a lack of site‐level effects; (iv) interactions between macrophytes and large wood that may be specific to restored reaches; (v) a need for further field and modelling studies to inform the accurate representation of large wood in hydraulic models. Some key challenges in partnership working are identified to aid planning and effectiveness of future collaborations.     

Optical receiver front end for optically powered smart dust

The ability to create and direct beams of light means that optical communications potentially offer a large power advantage over RF communications for sensor networks. This paper presents an optically powered receiver front end for wireless optical communications. A complete optical receiver front end including a photodetector, clock and Manchester data recovery circuits has been fabricated using the UMC 180 nm CMOS process. A novel modulation scheme is described that has been devised so that this front end can recover the clock and Manchester data from an optical beam. Experimental results show that the total current consumption of the optical receiver front end is as low as 18.8 nA for a 0.5 V supply when a 1 kbps Manchester data and 8 kHz clock signal are successfully recovered. This means that photodiodes on the same substrate as the front end circuits extract enough power from the communications beam to allow the front end to work at distances of up to 10 m from the transmitter. Copyright © 2013 John Wiley & Sons, Ltd.