Structural,Microstructure, Mechanical and Electrical Properties of Porous Zr4+-Cordierite Ceramic Composites

Zirconium-cordierite ceramic composites have been synthesized by a co-precipitation method using MgCl₂·6H₂O, NaAlO₂, Na₂SiO₃·5H₂O, and ZrOCl₂·8H₂O as starting materials. XRD, FT-IR, and SEM techniques were employed to study the effect of zirconium on the crystal structure and microstructure of the samples. XRD results revealed that spinel MgAl₂O₄ and t-ZrO₂ phases were predominant in the samples with low Zr⁴⁺ content (10 wt.%), whereas zircon ZrSiO₄ was predominant with high Zr⁴⁺ content (≥15 wt.%). The densification behavior was improved from 30.4 to 44.6% of the theoretical density (2.6 g/cm³) at 15 wt.% of Zr⁴⁺. However, microhardness of the sintered samples was enhanced from 7.1 to 7.5 GPa with increasing the Zr⁴⁺ dose from 0 to 25 wt.%. On the other hand, the gradual increase in Zr⁴⁺ content from 0 to 25 wt.% led to suppression in the electrical resistivity (ρ) from 16.6 to 2.8 × 10⁹ Ω/cm, respectively. In addition, the dielectric permittivity (ε) of the pure cordierite was decreased with Zr⁴⁺ ion addition. The maximum dielectric permittivity (ε) at low frequencies (10 MHz) was 18.7 at 10 wt.% Zr⁴⁺ content, whereas at high frequencies (1 GHz) it was 38.8 at 15 wt.% Zr⁴⁺ content.     

Making concrete with saline well-water

Permitted limits of salt concentrations in water used for making mortar and plain concrete differ from one country to another, but in any event geographical conditions prevent this guidance being applied directly to Saudi Arabia. Comparing the effects on compressive strength of saline well-water and drinking quality water, scientists at the Department of Building Research in the Saudi Arabian Standards Organisation show in this article that well-water with total dissolved salts (TDS) concentrations up to 4500 ppm can be suitable for mixing and curing mortars and plain concrete.     

Adsorptive Removal of Manganese Ions from Polluted Aqueous Media by Glauconite Clay-Functionalized Chitosan Nanocomposites

The presence of Mn(II) in water exceeding the permitted concentration limits declared by the World Health Organization (WHO) influences individuals, animals, and the ecosystem negatively. Therefore, there is a necessity for an efficient material to eliminate this potentially toxic element from wastewater. We herein focused on the adsorptive removal of Mn(II) ions from polluted aqueous media using natural Egyptian glauconite clay (G) and its nanocomposites with modified chitosan (CS). We applied modified chitosan with glutaraldehyde (GL), ethylenediaminetetraacetic acid (EDTA), sodium dodecyl sulfate (SDS), and cetyltrimethyl ammonium bromide (CTAB). The utilized nanocomposites were referred to as GL-CS/G, EDTA-GL-CS/G, SDS-CS/G, and CTAB-CS/G, respectively. The point of zero charge values of the materials were estimated. The adsorption properties of the G clay and its nanocomposites toward the removal of Mn(II) ions from polluted aqueous media as well as the adsorption mechanism were explored using a batch technique. The glauconite (G) and its nanocomposites: GL-CS/G, CTAB-CS/G, EDTA-GL-CS/G, and SDS-CS/G, exhibited maximum adsorption capacity values of 3.60, 24.0, 26.0, 27.0, and 27.9 mg g^?1, respectively. The adsorption results fitted well the Langmuir isotherm and pseudo-second-order kinetic models. The estimated thermodynamic parameters: ΔH° (from 1.03 to 5.55 kJ/mol) and ΔG° (from ? 14.5 to ? 18.8 kJ/mol), indicated that Mn(II) ion adsorption process was endothermic, spontaneous, and physisorption controlled. Furthermore, the obtained adsorption results are encouraging and revealing a great potentiality for using the modified adsorbents as accessible adsorbents for Mn(II) ion removal from polluted aqueous solutions, depending on their reusability, high stability, and good adsorption capacities.

Graphic Abstract

     

Oxidative desulfurization using graphene and its composites for fuel containing thiophene and its derivatives: An update review

Oxidative desulfurization, in which the aromatic sulfur containing compounds are oxidized to their analogical sulfones and subsequently extracted, has assured to be one of the exceedingly effective desulfurization processes for resulting ultra-low sulfur import fuels. The oxidative desulfurization process using graphene oxide has attracted significant interest for sulfur removal from fuels. In this survey, we discussed systematically the techniques of desulfurizations in catalytic oxidation, including the role of graphene as a supported catalyst, the research results of oxidative desulfurization using graphene oxide and provided the factors affecting the desulfurization process. We also debate the challenges counterattack the use of graphene oxide in this view, including their preparation methods and their efficiency and stability as a supported catalyst. Also, there are some of the desulfurization processes currently under investigation such as oxidation, biodesulfurization, and adsorption was outlined in brief. The combustion of fossil fuels containing sulfur compounds emits some of the sulfur oxides which considered a harmful influence on human health and the surrounding environment as well as the economy. It can be concluded that GO remains a kind of ideal supported catalysts to recognize a pure fuel in the near futurity due to their eligible physicochemical characteristics.     

Corrosion inhibition of nickel in H2SO4 solution by alanine

The effect of alanine, as a safe inhibitor, was studied by measuring the corrosion of Ni in aerated and stagnant 1 M H₂SO₄ solution (pH ～0.2). Measurements were performed under various conditions using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and the new electrochemical frequency modulation (EFM) methods. The obtained results showed that the addition of alanine alone gives a moderate inhibition and acts as an anodic-type inhibitor. The inhibition is due to physical adsorption of alanine on the metal surface. The inhibition efficiency enhances with increasing alanine concentration and immersion time but decreases with rise in temperature. The apparent activation energy, E_a, is higher in the presence than in the absence of alanine. Addition of I^? ions greatly improves the inhibition efficiency of alanine. The synergistic effect is due to enhanced adsorption of alanine cations by chemisorbed I^? anions on the metal surface. The results obtained from polarization, EIS and EFM techniques are in good agreement indicating that EFM method can be used successfully for monitoring corrosion rate of Ni in H₂SO₄ solution with and without alanine.     

Two-level atom in a squeezed vacuum with finite bandwidth

Abstract

The resonance fluorescence of a two-level atom driven by a coherent laser field and damped by a finite bandwidth squeezed vacuum is analysed. We extend the Yeoman and Barnett technique to a non-zero detuning of the driving field from the atomic resonance and discuss the role of squeezing bandwidth and the detuning in the level shifts, widths and intensities of the spectral lines. The approach is valid for arbitrary values of the Rabi frequency and detuning but for the squeezing bandwidths larger than the natural line-width in order to satisfy the Markoff approximation. The narrowing of the spectral lines is interpreted in terms of the quadrature-noise spectrum. We find that, depending on the Rabi frequency, detuning and the squeezing phase, different factors contribute to the line narrowing. For a strong resonant driving field there is no squeezing in the emitted field and the fluorescence spectrum exactly reveals the noise spectrum. In this case the narrowing of the spectral lines arises from the noise reduction in the input squeezed vacuum. For a weak or detuned driving field the fluorescence exhibits a large squeezing and, as a consequence, the spectral lines have narrowed linewidths. Moreover, the fluorescence spectrum can be asymmetric about the central frequency despite the symmetrical distribution of the noise. The asymmetry arises from the absorption of photons by the squeezed vacuum which reduces the spontaneous emission. For an appropriate choice of the detuning some of the spectral lines can vanish despite that there is no population trapping. Again this process can be interpreted as arising from the absorption of photons by the squeezed vacuum. When the absorption is large it may compensate the spontaneous emission resulting in the vanishing of the fluorescence lines.     

Bladeless Wind Turbine as Wind Energy Possible Future Technology

Access to clean energy is a fundamental need, yet it is by all accounts an extravagance only a few can afford.     

Adsorption of 141Ce(III), 160Tb(III), and 169Yb(III) on the Synthesized Inorganic Ion Exchanger,Zirconium Titanium Phosphate

Radiochemistry - Samples of zirconium titanium phosphate inorganic ion exchangers with different Zr : Ti molar ratios were synthesized. The samples were characterized using FT-IR spectroscopy,...     

Characterization of gamma irradiated plasticized starch/poly(vinyl alcohol) (PLST/PVA) blends and their application as protected edible materials

Blends based on different ratios of plasticized starch (PLST) and poly(vinyl alcohol) (PVA) were prepared in the form of thin films by casting solutions. The effect of gamma-irradiation on thermal, mechanical and morphological properties was investigated. The results of thermogravimetric analysis (TGA), in terms of weight loss and rate of reaction, indicated that the thermal stability of PLST/PVA blends is higher than pure PLST. The differential scanning calorimetry (DSC) scans do not show the glass transition temperature (T_g) of PVA or PLST, but instead a new single glass transition, indicating the occurrence of compatibility. The mechanical testing of PLST/PVA blends showed that tensile strength and elongation at break were increased by increasing the ratio of PVA. At any ratio of PLST/PVA, the tensile strength and elongation at break was found to increase with increasing irradiation dose. As an application in the field of prolonging food preservation lifetime, solutions of gamma irradiated PLST/PVA blends in the presence of chitosan, as an antimicrobial material, were applied to Mango fruits by surface coating. The results showed that this technique would provide suitable materials for food preservation that withstanding the temperature and stresses.     

Removal of lead ions from industrial waste water by different types of natural materials

The adsorption capacity of some natural materials for lead such as animal bone powder, active carbon, Nile rose plant powder, commercial carbon and ceramics was studied. The V/m ratio has been chosen to be 500 ml/g. The adsorption process was affected by various parameters such as contact time, pH and concentration of lead solution. The lead uptake percent reaches equilibrium state after 15, 30, 45 and 120 min for bone powder, active carbon, plant powder and commercial carbon, respectively. The uptake percent of lead increased by increasing pH value. The sequence of lead uptake percent (% adsorption) at constant pH from certain concentration of lead nitrate solution by the different natural materials is in the order: bone powder > active carbon > plant powder > commercial carbon. The uptake percent of lead is increased by decreasing the concentration of lead at constant pH. The capacity of lead adsorbed from nitrate solution by the different natural materials increased by increasing pH value. The synthetic and industrial waste-water samples were treated by using the different natural materials (contact time 3h, pH = 4). The percent removal of lead was 100% by bone powder, 90% by active carbon, 80% by plant powder and 50% by commercial carbon. There was no removal of lead by ceramics. This may be due to the presence of high percent of lead in the constituent of ceramics (372 mg/g).