Mixing and solid-liquid mass-transfer rates in a creusot-loire uddeholm vessel: A water model case study

The process of mixing and solid-liquid mass transfer in a one-fifth scale water model of a 100-ton Creusot-Loire Uddeholm (CLU) converter was investigated. The modified Froude number was used to relate gas flow rates between the model and its protoype. The influences of gas flow rate between 0.010 and 0.018 m³/s and bath height from 0.50 to 0.70 m on mixing time were examined. The results indicated that mixing time decreased with increasing gas flow rate and increased with increasing bath height. The mixing time results were evaluated in terms of specific energy input and the following correlation was proposed for estimating mixing times in the model CLU converter: T _mix=1.08Q ^−1.05 W ^0.35, where Q (m³/s) is the gas flow rate and W (tons) is the model bath weight. Solid-liquid mass-transfer rates from benzoic acid specimens immersed in the gas-agitated liquid phase were assessed by a weight loss measurement technique. The calculated mass-transfer coefficients were highest at the bath surface reaching a value of 6.40 × 10⁻⁵ m/s in the sprout region. Mass-transfer coefficients and turbulence parameters decreased with depth, reaching minimum values at the bottom of the vessel.     

Use of Warranties on Highway Projects: A Real Option Perspective

Since the introduction of warranty provisions in federal highway jobs, more and more state departments of transportation (DOTs) have considered the use of such provisions to protect their initial investment. This paper describes the pros and cons of warranty contracting in highway construction based on a survey of warranty practices in the United States. In particular, the need for state DOTs to buy a warranty for a well-built project is questioned. As an alternative, this paper introduces the warranty option, which gives the DOT the right to buy a warranty only if it becomes necessary at the end of construction. This option is exercised if the performance on site warrants it. This paper describes the mechanics of the warranty option and its advantages over the conventional warranty. A bid evaluation model is also developed for the warranty option approach.     

A New Recycled Al–Si–Mg Alloy for Sustainable Structural Die Casting Applications

Metallurgical and Materials Transactions A - The use of secondary aluminum for structural components in the automotive industry is limited by the high Fe contents in recycled alloys which often...     

Persistence Heterogeneity Testing in Panels with Interactive Fixed Effects

We consider large N,T panel data models with fixed effects, a common factor allowing for cross‐section dependence, and persistent data and shocks, which are assumed fractionally integrated. In a basic setup, the main interest is on the fractional parameter of the idiosyncratic component, which is estimated in first differences after factor removal by projection on the cross‐section average. The pooled conditional‐sum‐of‐squares estimate is consistent but the normal asymptotic distribution might not be centred, requiring the time series dimension to grow faster than the cross‐section size for correction. We develop tests of homogeneity of dynamics, including the degree of integration, that have no trivial power under local departures from the null hypothesis of a non‐negligible fraction of cross‐section units. A simulation study shows that our estimates and tests have good performance even in moderately small panels.     

Unveiling the presence of mixed oxidation states of Europium in Li7+δEuxLa3−δZr2−δO12−δ garnet and its impact on the Li-ion conductivity

Recently, lanthanides have been employed by researchers to examine their impact on the structure and properties of Li₇La₃Zr₂O₁₂ (LLZO) garnets. In this regard, we developed Europium oxide (Eu₂O₃) doped LLZO (Li_7+δEu_xLa_3−δZr_2−δO_12−δ) solid electrolyte which demonstrates a cubic phase with the symmetry of Iad (No.230) at room temperature. In this investigation, different concentrations of Eu ranging from 0.1 to 0.6 atoms per formula unit (pfu) were doped into Li₇La₃Zr₂O₁₂ to evaluate the impact of Eu on the stability of the cubic phase and thereby the ionic conductivity. The results unveiled that upon doping Eu³⁺ ions, the Eu²⁺ state is also formed and is then self-doped into the structure in which Rietveld refinement coupled with XPS, EPR, and solid-state NMR suggests that Eu³⁺ ions most probably partially occupy Zr⁴⁺ (16a) site, the Eu²⁺ ions occupy La³⁺ (24d) site, and the Li⁺ ions occupy two different sites (24d and 96h). It was further found that such a site preference induces distortion at LaO₈ polyhedrons opening up the neck for Li-ions diffusion, thereby enhancing the ionic conductivity. Moreover, it was revealed that Li-ions probably hop from 96h to 24d and then to 96h site to generate the Li-ion movement. Overall, by introducing Eu ions into the LLZO structure, an enhanced bulk ionic conductivity of 0.30 × 10⁻³ S/cm at 298 K with a minimum electronic conductivity of 2.547 × 10⁻⁹ S/cm at 298 K was achieved.     

Remote-Controlled Ambidextrous Robot Hand Concept

In the development of robotic limbs, the side of members is of importance to define the shape of artificial limbs and the range of movements. It is mainly significant tbr biomedical applications concerning patients suffering arms or legs injuries, fn this paper, the concept of an ambidextrous design lbr robot hands is introduced. The fingers can curl in one xvay or another, to imitate either a right hand or a left hand. The advantages and inconveniences of different models have been investigated to optimise the range and the maximum force applied by fingers. Besides, a remote control interthce is integrated to the system, allowing both to send comrnands through internet and to display a video streaming of the ambidextrous hand as feedback. Therefore, a robotic prosthesis could be used for the first time in telerehabilitation. The main application areas targeted are physiotherapy alter strokes or management of phantom pains/br amputees by/earning to control the ambidextrous hand. A client application is also accessible on Facehook social network, making the robotic limb easily reachable for the patients. Additionally the ambidextrous hand can be used tbr robotics research as well as artistic performances.     

Robustness with dynamic IQCs: An exact state-space characterization of nominal stability with applications to robust estimation

For robustness analysis with integral quadratic constraints, we formulate a new positivity condition on the solution of the corresponding linear matrix inequality which is necessary and sufficient for nominal stability of the underlying system. The application of this technical result is illustrated by a complete solution of the L₂-gain and robust H₂-estimator design problems if the uncertainties are characterized by dynamic integral quadratic constraints.