Weekly storage of coolness in heavy brick and adobe walls

Weekly storage of coolness in heavy walls (walls with large thermal inertia or large characteristic time constants or low Fourier numbers) was investigated numerically by considering one-dimensional heat conduction through the walls. The study consisted of first analyzing the heat flow through a single wall and considering various boundary conditions on the inside. The boundary conditions were: constant inside air tempeture throughout the day, variable inside air temperature on a 24-hour cycle, and variable inside air temperature on a 48-hour cycle. Next, the heat flow through walls was studied through a thermal network analysis of a simple building. In this case it was assumed that the ambient air temperature (following a periodic distribution) was increased suddenly and followed this new distribution for many days thereafter.It was concluded that walls with high thermal inertia or time constant can store coolness for several days. The larger the time constant of the wall (for example adobe as compared with brick) the longer it takes for the wall temperature to reach a steady periodic distribution after the change has occurred. However, because of low thermal conductivity of adobe, the retrieval of the stored coolness in these walls is slow, and the mean daily temperature of the room air in the adobe building does not change appreciably beyond seven days after the change. Increase of the wall thickness beyond 50 cm does not improve the thermal performance of the building significantly.     

Experimental and computational study of gas–solid fluidized bed hydrodynamics

The hydrodynamics of a two-dimensional gas–solid fluidized bed reactor were studied experimentally and computationally. Computational fluid dynamics (CFD) simulation results from a commercial CFD software package, Fluent, were compared to those obtained by experiments conducted in a fluidized bed containing spherical glass beads of 250– in diameter. A multifluid Eulerian model incorporating the kinetic theory for solid particles was applied in order to simulate the gas–solid flow. Momentum exchange coefficients were calculated using the Syamlal–O’Brien, Gidaspow, and Wen–Yu drag functions. The solid-phase kinetic energy fluctuation was characterized by varying the restitution coefficient values from 0.9 to 0.99. The modeling predictions compared reasonably well with experimental bed expansion ratio measurements and qualitative gas–solid flow patterns. Pressure drops predicted by the simulations were in relatively close agreement with experimental measurements at superficial gas velocities higher than the minimum fluidization velocity, U_mf. Furthermore, the predicted instantaneous and time-average local voidage profiles showed similarities with the experimental results. Further experimental and modeling efforts are required in a comparable time and space resolutions for the validation of CFD models for fluidized bed reactors.     

Effect of curing and heat treatment history on the dynamic mechanical response and the pore structure of hardened cement paste

Results for the dynamic mechanical response of hcp (hardened cement paste) specimens as a function of the curing-heat treatment history are reported. The temperature range investigated is from ?160°C to +100°C. In the temperature range from +25°C to +100°C, specimens cured at room temperature (R-cured) show a partially irreversible transition (reduction) in E. There are two low temperature transitions: the “adsorbate transition” between ?160°C and ?6-°C, and the “capillary transition” between ?50°C and 0°C. Both of these transitions are significantly affected by the curing-heat treatment history. Furthermore, both the E-modulus and the BET (water) surface area decrease as the severity of heat treatment increases.     

Optical properties of high-temperature heat-treated vitrinites

Three vitrinites (C = 80.0, 87.9 wt%, daf and 94.2 wt%, dmmf) have been heat-treated over the temperature range 1000–2400 °C in the presence of argon. The variation of morphological and optical properties of the heat-treated samples is studied systematically using reflected-light microscopy. An optically isotropic, highly reflecting material is formed on the surface of anisotropic particles of two of the vitrinites (C, 80 and 94.2 wt%) during semi-graphitization (1000–1400 °C), which decreases in extent with increasing temperature and is absent at the end of this stage. The development and subsequent disappearance of the isotropic material is probably due to the evolution of volatile matter and subsequent deposition of pyrolytic carbon during semi-graphitization. The continuous increase of bireflectance of these two vitrinite residues, with heat-treatment temperature, indicates progressive improvement in the ordering of the molecular structure. The reflectance of the heat-treated anthracitic vitrinite (C, 94.2 wt%), increases continuously whereas the reflectance of the heat-treated low-rank vitrinite (C, 80 wt% decreases slightly from a maximum during semi-graphitization. The third vitrinite (C, 87.9 wt%) does not develop an optically isotropic highly reflecting material on particle surfaces during semi-graphitization. However, this vitrinite softens during carbonization (25–1000 °C) producing a residue with a mosaictype anisotropic microstructure. The condition of polished surfaces prepared from residues of this vitrinite from the semi-graphitization to crystallization stages (1000–2300 °C) deteriorates, values of bireflectance and reflectance decrease continuously with increasing temperature. This appears to result from a reduction in the surface hardness of particles of this vitrinite residue resulting on transformation from two-dimensional ordering to three-dimensional graphitic ordering.     

Trace element geochemistry of the Obed Mountain deposit coals, Alberta, Canada

This study reports on the elemental concentrations and vertical variation of coal seams from the Obed Mountain deposit, Alberta Foothills, Canada. Results from two sections of Seam 1 show that the major elements (i.e. Al, Fe, Mg, K, Na, Ti, and Si) have high concentrations in intervals having high ash content, with the only exception of Ca. Similarities are apparent, in both sections, in the vertical variations of Th, U, Se, and Zn; Rb, Cs, and K; Sb, Mo, and W; Mn and Sr; and Ba, Cr, Co, Hf, and Sc. These similarities are also evident among the REEs, notably between Ce and La; also between Dy, Eu, and Sm. Most elements, with the exception of Ba and Sr are slightly more concentrated in Section 2 of Seam 1, located approximately 1.5Fig. km away from Section 1. Compared to Seam 1, Seam 2 has lower mean concentrations of elements. Boron in the coal ranges from 27 to 100 ppmw, though most values are less than 50 ppmw. Boron concentrations suggest a freshwater depositional environment. The element is depleted in the sedimentary partings (12–29 ppmw only) and is enriched in the coal interval near the roof and immediately beneath the partings. This enrichment shows possible downward mobilization of boron. Vertical variations of elements are helpful in delineating the boundaries between coal and sedimentary partings in the succession. The Obed Mountain coals are “clean” by world standards and their elemental concentrations are comparable with those in coals of a lower rank from the same coal formation used for power generation in Alberta. All sedimentary partings have low concentrations of Ba, Hf, Sc, Sr, Ta, Th, U, and REEs; this, along with the absence of an Eu negative anomaly suggests a non-volcanic origin for the partings.     

Resistance of concrete protected by fabric to projectile impact

This paper reports on impact behavior of concrete panels protected by Polypropylene and Zylon fabric, respectively. Concrete panels were cast with different thickness and subjected to impact by a steel projectile. The initial and residual velocities were measured experimentally and the energy absorbed by the different concrete panels with and without fabric was calculated. All concrete panels were able to absorb almost all the kinetic energy of the projectiles. For concrete panels protected by fabric scabbing of concrete from the back face was considerably reduced and the debris contained by the fabric. Upper and lower bounds are proposed for energy absorbed per unit thickness and penetration results are compared with the available empirical formulas. It is shown that current penetration equations do not accurately predict impact parameters for concrete protected by fabric.     

Understanding insiders: An analysis of risk-taking behavior

There is considerable research being conducted on insider threats directed to developing new technologies. At the same time, existing technology is not being fully utilized because of non-technological issues that pertain to economics and the human dimension. Issues related to how insiders actually behave are critical to ensuring that the best technologies are meeting their intended purpose. In our research, we have investigated accepted models of perceptions of risk and characteristics unique to insider threat, and we have introduced ordinal scales to these models to measure insider perceptions of risk. We have also investigated decision theories, leading to a conclusion that prospect theory, developed by Tversky and Kahneman, may be used to describe the risk-taking behavior of insiders and can be accommodated in our model. Our results indicate that there is an inverse relationship between perceived risk and benefit by insiders and that their behavior cannot be explained well by the models that are based on the traditional methods of engineering risk analysis and expected utility. We discuss the results of validating that model with forty-two senior information security executives from a variety of organizations. We also discuss how the model may be used to identify characteristics of insiders’ perceptions of risk and benefit, their risk-taking behavior and how to frame insider decisions. Finally, we recommend understanding risk of detection and creating a fair working environment to reduce the likelihood of committing criminal acts by insiders.     

An adaptive neuro‐fuzzy system for stock portfolio analysis

We propose an adaptive neuro‐fuzzy inference system (ANFIS) for stock portfolio return prediction. Previous work has shown that portfolio optimization can be improved by using predicted stock earnings rather than historical earnings. We show that predicted portfolio returns can be improved by using ANFIS and taking as input a variety of technical and fundamental attributes about various indices of the stock market. To generate membership functions, we use a robust noise rejection‐clustering algorithm. The neuro‐fuzzy model is tested on portfolios constituted from the Tehran Stock Exchange. In our experiments, the proposed method performs better in predicting the portfolio return than the classical Markowitz portfolio optimization method, a multiple regression, a neural network, and the Sugeno–Yasukawa method. © 2010 Wiley Periodicals, Inc.     

A memetic algorithm for minimizing the total weighted completion time on a single machine under step-deterioration

In this paper, we consider minimizing total weighted completion time criteria on a single machine. Jobs processing times are step function of its starting time and all jobs have a common due date. First, we present some new lemmas and dominance properties for this NP-hard problem, and then a memetic algorithm using these properties is developed. We compare the solutions of the memetic algorithm with optimal solutions obtained from complete enumeration. The results show that the average percentage error of the proposed algorithm from optimal solutions is about 2% and as the variance of processing time increase, the percentage errors decrease.     

The impact of website content dimension and e-trust on e-marketing effectiveness: The case of Iranian commercial saffron corporations

By considering the problems that commercial saffron companies have faced in international markets, the aim of this study is to investigate the impact of website content, including informational and design dimensions, on the effectiveness of e-marketing and e-trust as mediator variables. These aspects are examined with reference to sales and marketing division managers in a sample of 100 commercial saffron corporations in the Khorasan province. The findings support the ideas that website content has an effect on e-marketing and e-trust and that e-trust plays a mediating role in the relationship between e-trust and e-marketing effectiveness.