Lipid peroxidation and lysosomal integrity in different inflammatory models in rats: the effects of indomethacin and naftazone

The authors tried to establish quantitative and qualitative acoustic parameters of a good voice, suitable for future voice professionals. In their work they used long-time average spectrum analysis (LTAS) and three-dimensional analysis of periodicity (3D-PAN). They consider the regression straight line of formant regions and the parameters offered by 3D-PAN--jitter first of all--as the main acoustic parameters for the evaluation of voice quality and draw attention to the fact that acoustic parameters represent only one part of the evaluation of voice quality.     

Effect of some superplasticizers on the mechanical and physicochemical properties of blended cement pastes

Blended cement pastes made of Portland cement and fine sand (known in Egypt as El-Karnak cement) were made using a water–cement ratio of 0.25 by weight. Three pastes containing admixture (water-soluble condensates) were also prepared using a water–cement ratio of 0.25 and condensate (superplasticizer) content of 0.25% by the weight of cement; the superplasticizers used are Na-phenol sulfonate formaldehyde, Na-polystyrene sulfonate, and Na-ß-naphthol sulfonate formaldehyde condensates. All pastes were cured for various time intervals within the range of 0.02–90 days. Compressive strength tests, hydration kinetics, X-ray diffraction analysis, thermal analysis, and surface properties were studied and related as much as possible to the pore structure of the hardened pastes. © 1995 John Wiley & Sons, Inc.     

The use of wood pulp and radiation‐modified starch in wastewater treatment

Radiation‐induced graft copolymerization of maize starch/acrylic acid has been performed. Also, natural byproduct wood pulp was used after chemical treatment for the removal of metal ions from the investigated wastewater. The surface and structure morphology of the wood pulp and starch/acrylic acid were investigated by scanning electron microscopy and infrared spectroscopy. The physical parameters, such as swelling, gel percentage, and grafting efficiency (%) of starch/acrylic acid copolymer, were studied. The factors affecting the abilities of the prepared materials for removing heavy metal ions and dyes from aqueous solutions were studied. It was found that the maximum metal uptake is in the following sequence: Fe³⁺ > Cr³⁺ > Pb²⁺ > Cd²⁺. The adsorption capacity of such investigated metal ions increases with the increase of pH values. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

3-D Unitary ESPRIT: Accurate attitude estimation for unmanned aerial vehicles with a hexagon-shaped ESPAR array

Accurate estimation of the attitude of unmanned aerial vehicles (UAVs) is crucial for their control and displacement. Errors in the attitude estimate may misuse the limited battery energy of UAVs or even cause an accident. For attitude estimation, proprioceptive sensors such as inertial measurement units (IMUs) are widely applied, but they are susceptible to inertial guidance error. With antenna arrays currently being installed in UAVs for communication with ground base stations, we can take advantage of the array structure in order to improve the estimates of IMUs via data fusion. In this paper, we therefore propose an attitude estimation system based on a hexagon-shaped 7-element electronically steerable parasitic antenna radiator (ESPAR) array. The ESPAR array is well-suited for installment in the UAVs with broad wings and short bodies. Our proposed solution returns an estimation for the pitch and roll based on the inter-element phase delay estimates of the line-of-sight path of the impinging signal over the antenna array. By exploiting the parallel and centrosymmetric structure in the hexagon-shaped ESPAR array, the 3-dimensional Unitary ESPRIT algorithm is applied for phase delay estimation to achieve high accuracy as well as computational efficiency. We devise an attitude estimation algorithm by exploiting the geometrical relationship between the UAV attitude and the estimated phase delays. An analytical closed-form expression of the attitude estimates is obtained by solving the established simultaneous nonlinear equations. Simulations results show the feasibility of our proposed solution for different signal-to-noise ratio levels as well as multipath scenarios.     

Scaled and permuted string matching

The goal of scaled permuted string matching is to find all occurrences of a pattern in a text, in all possible scales and permutations. Given a text of length n and a pattern of length m we present an O(n) algorithm.     

Fully Automated Inductance Measuring System Using New Fabricated Inductance Box

Decade inductance boxes are widely used in electrical laboratories for calibration of instruments that measure inductance. The main aim of this paper is to construct a new inductance box providing a huge number of automated inductance steps, which are used in the laboratories to perform full automatic calibration of inductance meters. Therefore, a new inductance box has been introduced that mainly consists of three decades. The three inductance decades have the same design, but each has its four different internal inductive elements. Each decade can generate 15 different inductance values, so it is more economical and practical compared to the other ordinary decades, which produce only 10 values by using 10 internal inductive elements. 1666 different inductance values can be obtained from this inductance box, while 4096 inductance values can be obtained by the possible combinations of its three decades steps. Practical design, fabrication and specifications of this new inductance box are demonstrated in detail. It is designed to achieve relative accuracy in the range from 5 × 10^?4 to 5 × 10^?3. It could be used to perform full automatic inductance measurements at the National Institute of Standards, Egypt, for the first time. Comparison between an ordinary inductance box and the new introduced one has been made to validate its performance.     

Tensile behaviour of anchored blind bolts in concrete filled square hollow sections

In this paper, the tensile behaviour of a new type of blind bolt, the anchored blind bolt, has been studied. This type of bolt consists of a conventional blind bolt with a headed stud extension that anchors it into the infill concrete. It has been developed for use in moment-resisting connections between I-beams and concrete-filled hollow section columns. The behaviour of these connections is highly dependent on the tensile behaviour of the anchored blind bolts. Hence, the fundamental mechanics of this behaviour has been studied here, both experimentally and in simulations using FE models. The complex interactions between the headed stud anchorage, the concrete infill, and the steel tube have been examined in detail. The experimental and numerical findings were used to understand the influence of important parameters in the tensile behaviour of the anchored blind bolts. It was found that the location of the bolt with respect to the side walls of the tube had a substantial influence on the behaviour of the anchored blind bolts. All the bolts located close to the side walls of the square hollow sections reached the ultimate tensile capacity of the equivalent structural bolts. This was due to the development of a concrete strut which transferred the load to the corner of the steel section. The bolt diameter also had a significant influence on the stiffness and strength of the anchored blind bolts.     

控制之外——丹麦哥本哈根机场航站楼的天然光效果

哥本哈根机场被认为是世界上最好的机场之一。建筑在结构上非同一般：曲面钢构件筑成独特的尖拱，建筑因此而得到很多昵称，比如“鲸鱼”。旅客行进在建筑物内，天然光支配着空间的氛围。随着自然光和天气的变化，从精心设置的窗户和天窗内射入的光线经过空间的反射，也在不断变化着，为空间体验增添了又一层维度。