Analysis of enterococci using portable testing equipment for developing countries--variance of Azide NutriDisk medium under variable time and temperature.

This report compares the enterococci count on samples obtained with Azide NutriDisk (AND) (sterile, dehydrated culture medium) and Slanetz and Bartley (SB) medium when exposed to a variable in incubation time and temperature. Three experiments were performed to examine the recovery of enterococci on AND and SB media using membrane filtration with respect to: (a) incubation time; (b) incubation temperature; and (c) a combination of the two. Presumptive counts were observed at 37, 41, 46 and 47 degrees C and at 20, 24, 28 and 48 h. These were compared to AWWA standard method 9230 C (44 degrees C, 44 h). Samples were confirmed using Kanamycin Aesculin Azide (KAA) agar. Friedman's ANOVA and Students t-test analysis indicated higher enumeration of enterococci when grown on AND (p = 0.45) than SB (p = < 0.001) at all temperatures with a survival threshold at 47 degrees C. Significant results for AND medium were noted at 20 h (p = 0.021), 24 h (p = 0.278) and 28 h (p = 0.543). The study concluded that the accuracy of the AND medium at a greater time and temperature range provided flexibility in incubator technology making it an appropriate alternative to SB medium for monitoring drinking water using field testing kits in developing countries.     

EBSP study of the annealing behavior of aluminum deformed by equal channel angular processing

Commercial purity aluminum (99.5%) was fabricated by equal channel angular pressing (ECAP) up to total accumulated strains of approx. 10. The annealing behavior of material deformed to total strains of approx. 1 and 10 was investigated, using heat treatments of 2 h at various temperatures from 100 to 500 °C. The microstructure of the annealed materials was characterized using the electron back-scatter pattern technique. A number of parameters were determined including the distribution and average values of both the boundary spacings and misorientations. For samples deformed to a total strain of 1, annealing resulted in discontinuous recrystallization. For samples deformed to a total strain of 10, annealing resulted in microstructures exhibiting characteristics of both uniform coarsening and, in a number of places, of discontinuous recrystallization. An attempt was made, based on the boundary spacing distributions, to separate these two components. The grain size after annealing was still however small, being just 6.4 μm after 2 h at 300 °C.     

Modeling tool wear in end-milling using enhanced GMDH learning networks

This paper presents an enhanced approach to predictive modeling for determining tool-wear in end-milling operations based on enhanced-group method of data handling (e-GMDH). Using milling input parameters (speed, feed, and depth-of-cut) and response (tool wear), the data for the model is partitioned into training and testing datasets, and the training dataset is used to realize a predictive model that is a function of the input parameters and the coefficients determined. In our approach, we first present a methodology for modeling, and then develop predictive model(s) of the problem being solved in the form of second-order equations based on the input data and coefficients realized. This approach leads to some generalization because it becomes possible to predict not only the test data obtained during experimentation, but other test data outside the experimental results can also be used. Moreover, this approach makes it easy to present the realized solution in a form that can be further optimized for the input parameters using some optimization techniques. The results realized using our e-GMDH method are promising, and the comparative study presented shows that the e-GMDH outperforms polynomial neural network (PNN); moreover, it is more flexible than the conventional GMDH, which tends to produce nonlinear solutions even for simple problems. In the investigation, the extended particle swarm optimization (PSO) technique was applied to obtain the optimal parameters. Consequently, the modeling approach is extremely useful in realizing a computer-aided process-planning system in an advanced manufacturing environment.     

The sleeping dragon: Wind energy in the Asia-Pacific region

The Asia-Pacific region is one of the fastest growing regional economies in the world today. The region is home to over half of the global population and is one of the most important markets for multinational corporations to penetrate. The wind power sector is no exception. Wind resources remain untapped and the demand for electricity continues to grow as a result of expanding and modernizing economies. Godfrey Chua, Emerging Energy Research USA reports on the current status and development of the wind industry in the region.     

TTI hydraulics and erosion control laboratory research field performance of erosion-control blankets

Storm water management issues facing the Texas Department of Transportation in the late 1980s led to the development of a coordinated research program with the Texas Transportation Institute. Researchers developed methodologies for evaluating the field performance of various erosion control technologies of the most widely used products within the Department's construction and maintenance operations. From these methodologies, the Hydraulics and Erosion Control Laboratory was designed and constructed. Currently, participants include private industry (manufacturers of erosion control products), transportation researchers (TTI), and the public sector (TxDOT).The results reported in this paper reflect 2 years of erosion-control blanket research. The study objectives were to determine the effectiveness of erosion-control blankets on the growth of warm-season perennial grasses and their ability to prevent sediment loss in a sloped condition.The laboratory simulates the highway environment with the sloped plots (6 m in width) located on an earthen embankment that is 300 m in length and 6.75 m in height (94 ft. by 22 ft., vertically). A randomized experimental design was replicated on two soil types (sand and clay) for each slope condition (3:1 or 2:1) with a control.In general, the results indicate better combined results relating to sediment retention and vegetation establishment performance for erosion-control blankets on sandy soils (noncohesive) regardless of slope condition (3:1 or 2:1) or material type. A minimum of 50% more sediment was retained on the sandy treatment plots and a 45% more vegetation coverage was achieved compared with the control plots. When analyzed by material type related to performance, excelsior, synthetic blends, and straw/coconut blends performed the best. For clay soils (cohesive), regardless of slope condition (3:1 or 2:1), the combined results indicate a minimum of 75% more sediment was retained and a minimum of 5% more vegetation establishment was achieved compared with the control plots. When analyzed by material type related to performance, excelsior, straw, and straw/coconut blends performed the best.     

A Numerical Investigation of Heat Suppression in HEMT for Power Electronics Application

Silicon - In this paper, AlGaN/GaN High Electron Mobility Transistor (HEMT) with stacked passivation (Diamond/SiN) is proposed and investigated. The implementation of stacked passivation in HEMT...     

In Vitro Characterization of Human CD24hiCD38hi Regulatory B Cells Shows CD9 Is Not a Stable Breg Cell Marker

Regulatory B (Breg) cells are endowed with immune suppressive functions. Various human and murine Breg subtypes have been reported. While interleukin (IL)-10 intracellular staining remains the most reliable way to identify Breg cells, this technique hinders further essential functional studies. Recent findings suggest that CD9 is an effective surface marker of murine IL-10 competent Breg cells. However, the stability of CD9 and its relevance as a unique marker for human Breg cells, which have been widely characterized as CD24^hiCD38^hi, have not been investigated. Here, we demonstrate that CD9 expression is sensitive to in vitro B cell stimulations. CD9 expression could either be re-expressed or downregulated in purified CD9-negative B cells and CD9-positive B cells, respectively. We found no significant differences in the Breg differentiation capacity of the CD9-negative and CD9-positive B cells. Furthermore, CD9-positive B cells co-express CD40 and CD86, suggesting their nature as B cell activation or co-stimulatory molecules, rather than regulatory ones. Therefore, we report the relatively unstable CD9 as a distinct surface molecule, indicating the need for further research for a more reliable marker to purify human Breg cells.     

Temporal patterns in phytoplankton,zooplankton and fish composition,abundance and biomass in Shirati Bay,Lake Victoria,Tanzania

Shirati Bay is among the important breeding and nursery sites for major fish species in Lake Victoria. Weekly samplings were conducted to assess the temporal patterns in phytoplankton, zooplankton and fish composition, abundance and biomass in relation to prevailing water quality parameters. The study also determined the influences of plankton dynamics and water quality on the fish catch composition and biomass. It was hypothesized that temporal patterns in the composition, abundance and biomass in the plankton in the bay are controlled by water quality parameters that, in turn, affect the composition and biomass of fish catches. The phytoplankton comprised mainly cyanophytes and bacillariophytes, while the zooplankton were dominated by copepods. The heavy rain season exhibited a significantly higher plankton abundance and biomass than the dry season. The plankton abundances in both seasons exhibited significant positive correlations with water temperature and transparency. The phytoplankton community was controlled by calanoid and cyclopoid species. At higher trophic levels, Lates niloticus juveniles, Oreochromis niloticus juveniles and haplochromines controlled Cladocera and Cyclopoid copepods, while Tilapia rendalli juveniles controlled the Rotifera. This study revealed that Cyanophyta and Bacillariophyta are the dominant phytoplankton, whereas cyclopoids dominate the zooplankton species in the bay. These dominant plankton groups are partly controlled by rainfall, water temperature and transparency. Fish biomass, zooplankton and phytoplankton exhibit a typical predator–prey inverse relationship. Thus, evaluation of the plankton composition, abundance and biomass should be mandatory during fisheries stock assessments to effectively manage the fishery resources in the bay.