三聚甲醛萃取—精馏新工艺及过程优化

本文对采用Ｓ１和Ｓ２的混合物作为萃取剂的三聚甲醛萃取－精馏新工艺进行了模拟计算，得到了使总费用最低的三聚甲醛精制工艺的联合操作参数。模拟计算结果成功地指导了小试操作，并可为大型工程设计提供可靠的基础数据。     

监理企业体制改革的思考与建议

我国监理业体制改革已有六七个年头，时至今日，全国仍有50％以上的监理企业未进行改制，面对即将全面开放的国内咨询业市场，监理企业改制更加迫切。本文通过分析监理企业体制改革不到位的原因、原国有监理体制的弊病，提出了对监理企业改制的建议。     

600MW机组热力系统优化设计探讨

在保证机组运行安全、可靠的前提下，对热力系统进行了优化，合理地减少了备用设备和备用容量，降低系统阻力及工质损失。从而达到了降低能耗和初投资，减少运行成本的目的。     

Comparative study of the elimination of toluene vapours in twin biotrickling filters using two microorganisms Bacillus cereus S1 and S2

BACKGROUND: To investigate the microbial degradation performance of organic pollutants in the atmosphere using a biotrickling filter, two microorganism strains, Bacillus cereus S1 and Bacillus cereus S2, were selected, identified and inoculated into a twin biotrickling filter for comparison. RESULTS: Both strains showed good performance towards the degradation of model organic pollutants when gas flow rates ranged from 100 to 600 L h⁻¹. For S1, the total maximum removal efficiency (RE) of toluene was maintained nearly 100% not only at gas flow rates of 100 L h⁻¹ corresponding to empty bed residence time (EBRT) 199.44 s, but also at gas flow rates of 200 L h⁻¹ (EBRT = 99.72 s) and 300 L h⁻¹ (EBRT = 66.48 s). However, S2 had a much lower degradation capability; near 100% removal efficiency was obtained only at the gas flow rate of 100 L h⁻¹ although both bacteria belong to the same Bacillus cereus. With further increase in gas flow rate, the total REs for both S1 and S2 decreased slightly at first and then dropped sharply to 46% and 35%, respectively, at an EBRT of 33.24 s, corresponding to a gas flow rate of 600 L h⁻¹. Starvation for between 2 and 10 days resulted in the re‐acclimation times of both strains ranging between 1.0 and 15.5 h. CONCLUSION: Strain S1 would be a better choice for inoculation into a biotrickling filter than strain S2, because of its much higher toluene removal capacity and rapid recovery to full performance. Copyright © 2008 Society of Chemical Industry     

探析实践教学在计算机专业数据库课程的应用

针对现在中等职业技术学校计算机专业数据库及应用课程,结合中职教学研究实践,并提出了相应的教学设计、教学方法、考核方式,在提高数据库及应用课程理论教学效果的同时进一步提升学生对知识的综合应用能力、实践动手能力和创新能力,在实际教学中取得了较好的效果。     

Internet网络上合法侦听模型的研究

本文根据ETSI标准,从合法侦听的角度分析了网络数据传输模型,给出了该传输模型下侦听点的设置规则。根据网络联接方式和侦听点设置的不同,设计出了相应的合法侦听模型。     

Thermoelectric properties of p-type （Bi0.15Sb0.85）2Tes-PbTe graded thermoelectric materials with different barriers

The p-type （Bi0.15Sb0.85）2Te3 and PbTe are typical thermoelectric materials used for low and middle temperature range and functional graded materials （FGM） is an inevitable way to widen the working temperature range. Here two segments graded thermoelectric materials （GTM） consisting of （Bi0.15Sb0.85）2Te3, PbTe and different barriers were fabricated by the common hot pressure method. Metals Fe, Mg and Ni were used as barriers between the two segments. The diffusion of different barriers between the barriers and bases were analyzed by electron microprobe analysis （EMA）. The phase and crystal structures were determined by X-ray diffraction analysis （XRD）. The thermoelectric properties were measured at 303 K along the direction parallel to the pressing direction. The results show that the compositional diffusion occurs when there is no barrier at the interface of the two segments, and the diffusion of Pb is most obvious; as the barrier material, the diffusion of metals Fe, Mg and Ni between different bases is not very obvious, and the thermoelectric properties of GTM is much better than that of the original segment.     

单色仪连续光谱发光测试的研究

本文论述了光栅单色仪连续光谱杂光的产生、测试原理和测试方法,以及杂光对分光测量的影响.给出了WDY-2500型近红外光栅单色仪连续光谱杂光分布状态的测量结果.     

外源小鼠核酸促电离辐射损伤的同系小鼠肠腺细胞修复的相关基因克隆

为研究克隆外源核酸促电离辐射损伤的小鼠肠腺细胞修复的相关基因。建立BALB／c小鼠电离辐射后给予外源RNA与生理盐水治疗的6、12、24h,4d和8d的模型,收集空肠组织标本后采用消减杂交基础上的LD－PCR技术,获取与受照射小鼠肠腺损伤修复相关的基因克隆,对其进行全自动测序与GeneBank检索,新基因递交给基因库。获取了90个与肠腺修复相关的基因,杂交证实在核酸治疗组与生理盐水治疗组之间呈差异表达,其中18个是新基因,GeneBank接受号为AF240164－240181。获取了90个可能与外源核酸促肠腺修复相关的基因克隆,其中18个是新的相关基因。     

电力市场技术支持系统人机图形组态架构及关键技术

电力市场技术支持系统需要随市场规则变化不断调整,现有的电力市场技术支持系统在人机图形展示方面主要依赖定制化开发,在运维升级方面存在明显局限.文中结合电力市场数据特点,分析电力市场数据的图形展示交互需求,提出一种电力市场多维度数据灵活展示的图形组态架构,并对其关键技术如属性引用及事件交互组态、多维数据动态关联定义、基于推...