Authorship patterns in agricultural sciences in Egypt

This study examines patterns of authorship in nineteen Egyptian journals of agricultural science. Multiple authorship was found to be the predominant trend in the field and co-authored papers accounted for some 79 percent of the sample. The most common form of multiple authorship involved three people. Considerable variation was found among sub-fields and co-authorship was found to be most common in social-science related agricultural disciplines. The author found no significant differences in patterns of collaboration in the agricultural sciences in Egypt and two the other developing countries for which comparative data was available, India and Pakistan.     

Cavitation Damage of the single-crystal nickel-base superalloy SRR99 during creep at 850°C

Various heat treatments of the single-crystal nickel-base superalloy SRR99 have been carried out to produce a wide range of initial γ′ phase morphology. The cavitation damage has been studied after creep fracture at 850°C and stresses between 400MPa and 650 Mpa. The crep fracture surfaces and longitudinal sections of crept specimens have been examined by image analysing system in order to determine the size distribution and the area fraction of (001)-planes cracks on fracture surface characterise the creep crack damage level. The cracking morphology in fractured material as a function of stress and γ′-phase size has also been investigated. The results show, that crack propagation occurred anisotropically on (001) crystallographic planes perpendicular to the aplied stress along the γ/γ′ interfaces. It was found, that creep cracks dependent on the shape and size of γ′-phases developing at the temperature and stress level.     

A revised particle swarm optimization based discrete Lagrange multipliers method for nonlinear programming problems

In this paper, a new algorithm for solving constrained nonlinear programming problems is presented. The basis of our proposed algorithm is none other than the necessary and sufficient conditions that one deals within a discrete constrained local optimum in the context of the discrete Lagrange multipliers theory. We adopt a revised particle swarm optimization algorithm and extend it toward solving nonlinear programming problems with continuous decision variables. To measure the merits of our algorithm, we provide numerical experiments for several renowned benchmark problems and compare the outcome against the best results reported in the literature. The empirical assessments demonstrate that our algorithm is efficient and robust.     

Optimal shape design of functionally graded thickness inversion tubes subjected to oblique loading

This paper aims to understand and optimize the crush response of Functionally Graded Thickness (FGT) tubes with various thickness distributions subjected to oblique loading using multi-objective optimization method. Hence, finite element (FE) models are established and their results are validated by experimental tests. Two objective functions (specific energy absorption and peak load) are approximated by four different multi-objective optimization models: the weighted average, multi-design optimization (MDO) technique, constrained single-objective optimization, and geometrical average methods. The optimum design results demonstrate that the selection of appropriate inversion tube parameters such as the die radius, the coefficient of friction between the die and tube, and thickness distribution function have significant roles in the crashworthiness design. The results give new ideas to improve the crashworthiness performance of inversion tubes under oblique loading conditions.     

Evaluation of Al and Some of Its Alloys as Anode Materials vs γ-MnO2 as Cathode Material and Ore Produced γ-MnO2 vs Zn Anode in KOH Solution

In this study electrochemical performance of Al and some of its alloys (Al-Zn, Al-Mg and Al-Mn) anodes vs MnO2 cathode were carried out in alkaline solution. The results show that the Al-Zn alloy anode has the best cell capacity among the other alloys. Cell capacity values go in the order Al-Zn＞Al-Mg＞Al＞Al-Mn. This result is probably related to the nature of passive films formed on the surface of the alloys which examined by scanning electron microscopy (SEM). SEM morphologies of Al and its alloys showed coarse grains of passive films formed on the surface of these anode materials while Al-Mn morphology shows a needle-like structure.Electrolytic manganese dioxide (EMD) produced by electrodepositing on platinum anode from liquor resulting from reduction of low grade pyrolusite ore (β-MnO2) by sulfur slag was characterized as cathode in alkaline Zn-MnO2 batteries. Ore produced sample (EMD1) was performed well in comparison with EMD standard (EMD2) (commercial battery grade electrolytic manganese dioxide, TOSOH-Hellas GH-S). SEM morphology of Zn anode after cell reaction was carried out and showed that Zn anode has fine grains of passive film on its surface.     

Synthesis,structural characterization and properties of novel functional poly(ether imide)/titania nanocomposite thin films

In this study, the synthesis, morphology, and thermal properties of new poly(ether imide)/titania nanohybrid films were investigated. The novel diamine containing functional nitrile groups was prepared in two steps by the nucleophilic substitution reaction and it was fully characterized by different techniques. Reaction of this diamine with pyromellitic dianhydride and 4-aminobenzoic acid gave poly(ether imide) with carboxylic acid end groups. This acid functionalized poly(ether imide) was condense with different amount of TiO₂ nanoparticles to provide organic-inorganic bonding, and the flexible films of these hybrid were prepared. The obtained materials were characterized by Fourier transform-infrared spectroscopy, thermogravimetry analysis (TGA), differential scanning calorimetry, X-ray powder diffraction, UV–Vis spectroscopy, field emission-scanning electron microscopy, and transmission electron microscopy (TEM) techniques. TEM of the nanohybrid films with 12% of TiO₂ contents confirms well dispersion of nanoparticles in the polymer matrix. TGA data indicated that the thermal behavior of the hybrid materials was increased with an increasing the content of TiO₂ nanoparticles. The tensile stress–strain of the hybrids was investigated and the resulting nanocomposites showed good mechanical properties. The permeability and selectivity of the PEI/TiO₂ membranes as a function of the titania weight percentage were study and the results indicated that the permeabilities of CO₂ and N₂ increase with increasing the titania content.     

Hydrodynamic and heat transfer properties of magnetic fluid in porous medium considering nanoparticle shapes and magnetic field-dependent viscosity

The purpose of this paper is to study the characteristics of the combined convection heat transfer and a micropolar nanofluid flow passing through an impermeable stretching sheet in a porous medium. The nanofluid flow field is affected by a magnetic field perpendicular to the sheet. The dynamic viscosity of the micropolar nanofluid changes under the influence of the magnetic field. The continuity, linear momentum, angular momentum, and energy equations are first simplified using the order of magnitude technique that, along with the applied boundary conditions and the definition of the appropriate parameters, are transferred to the similarity space using the similarity analysis. Then the resulting equations are solved using the Runge–Kutta method.The distinction of the macroscale and microscale flow fields and temperature fields resulting from different nanoparticle shapes was clarified. Increasing the Hartmann number, the vortex viscosity parameter, the magnetic parameter, the nanoparticle volume fraction, and the permeability parameter of the porous media increased the surface friction on the sheet. Increasing the vortex viscosity parameter, the magnetic parameter, and the volume fraction of the nanoparticles increases the Nusselt number.     

Comprehensive review of water management and wastewater treatment in food processing industries in the framework of water-food-environment nexus

Food processing is among the greatest water-consuming industries with a significant role in the implementation of sustainable development goals. Water-consuming industries such as food processing have become a threat to limited freshwater resources, and numerous attempts are being carried out in order to develop and apply novel approaches for water management in these industries. Studies have shown the positive impact of the new methods of process integration (e.g., water pinch, mathematical optimization, etc.) in maximizing water reuse and recycle. Applying these methods in food processing industries not only significantly supported water consumption minimization but also contributed to environmental protection by reducing wastewater generation. The methods can also increase the productivity of these industries and direct them to sustainable production. This interconnection led to a new subcategory in nexus studies known as water-food-environment nexus. The nexus assures sustainable food production with minimum freshwater consumption and minimizes the environmental destructions caused by untreated wastewater discharge. The aim of this study was to provide a thorough review of water-food-environment nexus application in food processing industries and explore the nexus from different aspects. The current study explored the process of food industries in different sectors regarding water consumption and wastewater generation, both qualitatively and quantitatively. The most recent wastewater treatment methods carried out in different food processing sectors were also reviewed. This review provided a comprehensive literature for choosing the optimum scenario of water and wastewater management in food processing industries.