Hydraulic reactivity and cement formation of baghdadite

In this study, the hydraulic reactivity and cement formation of baghdadite (Ca₃ZrSi₂O₉) was investigated. The material was synthesized by sintering a mixture of CaCO₃, SiO₂, and ZrO₂ and then mechanically activated using a planetary mill. This leads to a decrease in particle and crystallite size and a partial amorphization of baghdadite as shown by X-ray powder diffraction (XRD) and laser diffraction measurements. Baghdadite cements were formed by the addition of water at a powder to liquid ratio of 2.0 g/ml. Maximum compressive strengths were found to be ~2 MPa after 3-day setting for a 24-h ground material. Inductively coupled plasma mass spectrometry (ICP-MS) measurements showed an incongruent dissolution profile of set cements with a preferred dissolution of calcium and only marginal release of zirconium ions. Cement formation occurs under alkaline conditions, whereas the unground raw powder leads to a pH of 11.9 during setting, while prolonged grinding increased pH values to approximately 12.3.     

Hyperinsulinaemia, dyslipaemia and cardiovascular risk in girls with a history of premature pubarche

Girls with a history of premature pubarche, i.e. appearance of pubic hair before 8 years of age, show hyperinsulinism in response to an oral glucose tolerance test. As hyperinsulinaemia has a major role in dyslipaemia, and is considered an independent risk factor for cardiovascular disease, we assessed the patterns of plasma insulin concentration after a standard oral glucose tolerance test as well as fasting serum lipid, lipoprotein, and sex hormone-binding globulin concentrations in girls (n = 81) with premature pubarche compared with girls (n = 55) matched with them for stage and bone age to ascertain their metabolic states to identify those potentially at risk for the development of premature cardiovascular disease. Mean serum insulin concentrations were higher in patients at all pubertal stages, and associated with elevated serum triglyceride, very low density cholesterol and very low density triglyceride concentrations (p value range 0.04 to < 0.0001) but reduced sex hormone-binding globulin. Premature pubarche patients also displayed higher low density to high density lipoprotein cholesterol ratios compared with control subjects (p = 0.004 to 0.008). In conclusion, hyperinsulinaemia, decreased sex hormone-binding globulin concentrations and an unfavourable lipid pattern are common features in premature pubarche girls supporting the contention that atherogenic abnormalities composing the metabolic syndrome could start in childhood. To determine the clinical sequelae of such clustering of metabolic deviations, girls who were identified need to be followed up for the potential development of premature cardiovascular disease.     

Dehydrogenation of Light Alkanes Over Rhenium Catalysts on Conventional and Mesoporous MFI Supports

Recently, Re/HZSM-5 (Si/Al = 15) was shown to be an efficient catalyst for ethane dehydrogenation and aromatization at 823 K and atmospheric pressure. In this reaction, the major initial products were benzene, toluene and xylene (BTX), but increasing amounts of ethene were produced with time on stream due to deactivation of the catalyst. We show that by use of rhenium impregnated MFI supports with very few or no acidic sites (Si/Al > 500), highly selective ethane dehydrogenation catalysts are obtained with ethene selectivities of 98%. By use of mesoporous MFI supports (Si/Al >500) the lifetime of the catalyst appears to be slightly improved compared to conventional MFI crystals. The beneficial effect of a mesoporous MFI support is convincingly demonstrated in propane dehydrogenation, where both conversion and selectivities on the mesoporous MFI (Si/Al > 500) impregnated with Re are significantly higher than on Re supported on a comparable conventional MFI support.     

Eicosapentaenoic acid (20∶5n-3) from the marine microalgaPhaeodactylum tricornutum

Eicosapentaenoic acid (EPA, 20∶5n-3) was obtained from the marine microalgaePhaeodactylum tricornutum by a three-step process: fatty acid extraction by direct saponification of biomass, polyunsaturated fatty acid (PUFA) concentration by formation of urea inclusion compounds, and EPA isolation by semipreparative high-performance liquid chromatography (HPLC). Alternatively, EPA was obtained by a similar two-step process without the PUFA concentration step by the urea method. Direct saponification of biomass was carried out with two solvents that contained KOH for lipid saponification. An increase in yield was obtained because the problems associated with emulsion formation were avoided by separating the biomass from the soap solution before adding hexane for extraction of insaponifiables. The most efficient solvent, ethanol (96%) at 60°C for 1 h, extracted 98.3% of EPA. PUFA were concentrated by the urea method with a urea/fatty acid ratio of 4∶1 at a crystallization temperature of 28°C and by using methanol and ethanol as urea solvents. An EPA concentration ratio of 1.73 (55.2∶31.9) and a recover yield of 78.6% were obtained with methanol as the urea solvent. This PUFA concentrate was used to obtain 93.4% pure EPA by semipreparative HPLC with a reverse-phase, C₁₈, 10 mm i.d.×25-cm column and methanol/water (1% acetic acid), 80∶20 w/w, as the mobile phase. Eighty-five percent of EPA loaded was recovered, and 65.7% of EPA present inP. tricornutum biomass was recovered in highly pure form by this three-step downstream process. Alternatively, 93.6% pure EPA was isolated from the fatty acid extract (without the PUFA concentration step) with 100% EPA recovery yield. This two-step process increases the overall EPA yield to 98.3%, but it is only possible to obtain 20% as much EPA as that obtained by three-step downstream processing.     

Plasma desorption mass spectrometry, an analytical tool in protein engineering: characterization of modified insulins

Californium-252 plasma desorption mass spectrometry (PDMS) hasbeen employed for the characterization of a series of humaninsulin derivatives in order to evaluate the performance ofthis technique as an analytical tool in protein engineering.Several of the characterized modifications result in a 1 a.m.u.mass change. The precision in mass determination obtainableby PDMS analysis is not sufficient for unambiguous verificationof such modifications based on the molecular weight alone. Itis, however, possible to carry out in situ enzymatic digestionof the sample. Subsequent PDMS analysis will in most cases revealif the modification has been introduced as intended.     

Yttria-stabilized hafnia-zirconia thermal barrier coatings: The influence of hafnia addition on TBC structure and high-temperature behaviour

The search for more reliable and durable thermal barrier systems is a key factor for future aircraft turbine engines success. Hafnia is therefore an attractive ceramic component due to its similarity to zirconia and its elevated structural transformation temperatures. We report here structural and thermomechanical investigations of various plasma-sprayed coatings composed of ZrO₂+x mol% HfO₂ (x=0, 25, 50 and 100), partially stabilized by 4.53 mol% yttria. X-ray diffraction studies show that, a metastable, non-transformable, high yttrium content, tetragonal solid solution is the only phase observed on the as-sprayed samples. This phase is crystallographically equivalent to the t phase described for classical yttrium-partially stabilized zirconia (Y-PSZ) thermal barrier coatings (TBCs). Upon high-temperature annealing in air (T=1200C), however, the return of this t phase to equilibrium differs from the classical tt+c reaction. According to literature data, reactions of the type tt+c+m should prevail at the highest hafnia contents (x50). Indeed, important quantities of monoclinic phase are accordingly being observed upon cooling. Thermal cycling of TBC samples in air has been performed at 1100C. The Young's modulus of the ceramic coating, which progressively increases when hafnia is substituted for zirconia, has a strong influence on TBC thermomechanical resistance.     

Counting Fluorescent Dye Molecules on DNA Origami by Means of Photon Statistics

Obtaining quantitative information about molecular assemblies with high spatial and temporal resolution is a challenging task in fluorescence microscopy. Single‐molecule techniques build on the ability to count molecules one by one. Here, a method is presented that extends recent approaches to analyze the statistics of coincidently emitted photons to enable reliable counting of molecules in the range of 1–20. This method does not require photochemistry such as blinking or bleaching. DNA origami structures are labeled with up to 36 dye molecules as a new evaluation tool to characterize this counting by a photon statistics approach. Labeled DNA origami has a well‐defined labeling stoichiometry and ensures equal brightness for all dyes incorporated. Bias and precision of the estimating algorithm are determined, along with the minimal acquisition time required for robust estimation. Complexes containing up to 18 molecules can be investigated non‐invasively within 150 ms. The method might become a quantifying add‐on for confocal microscopes and could be especially powerful in combination with STED/RESOLFT‐type microscopy.     

Effect of heavy metals on the surface free energy and zeta potential of volcanic glass: implications on the adhesion and growth of microorganisms

We studied the surface properties of eruptive material from Deception Island (South Shetland Islands, Antarctica). The surface free energy and zeta potential were analyzed in obsidian and pumice stones immersed in different electrolytes (NaCl, BaCl₂, AlCl₃, VCl₂, PbCl₂, CdCl₂, FeCl₃, and CrCl₃). The results show that obsidian has a monopolar character. The value of the obsidian electron-donor component increased in the presence of heavy metals, reaching 61.0 mJ/m² in the case of CrCl₃. This means that the heavy metals transform the surface of obsidian into a hydrophilic material in almost all cases, except in the case of FeCl₃, which makes the obsidian surface hydrophobic. The pH variation of the liquid phase has a significant influence on the zeta potential, not only changing its value, but also the sign of the surface electric charge. A significant result is that a variation of two in pH (between 5 and 7) changes the sign of the charge from positive to negative or vice versa, depending on the electrolyte used. In general, the presence of electrolytes changes the surface properties of solid materials and consequently the adhesion and growth of microorganisms on coastal rocks.     

Metabolomics of Genetically Modified Crops

Metabolomic-based approaches are increasingly applied to analyse genetically modified organisms (GMOs) making it possible to obtain broader and deeper information on the composition of GMOs compared to that obtained from traditional analytical approaches. The combination in metabolomics of advanced analytical methods and bioinformatics tools provides wide chemical compositional data that contributes to corroborate (or not) the substantial equivalence and occurrence of unintended changes resulting from genetic transformation. This review provides insight into recent progress in metabolomics studies on transgenic crops focusing mainly in papers published in the last decade.     

Comprehensive characterization of the functional activities of pressurized liquid and ultrasound-assisted extracts from Chlorella vulgaris

Chlorella vulgaris has been referred as a potential source of bioactive compounds (carotenoids and fatty acids). In this work, the ability of an environmentally friendly extraction technique such as Pressurized Liquid Extraction (PLE) and a traditional extraction technique such as Ultrasound-Assisted Extraction (UAE) to obtain functional compounds from C. vulgaris, at analytical scale, has been demonstrated. Seeked bioactivities were antioxidant and antimicrobial, for their interest in the food industry. Therefore, a methodology including analytical extraction, in-vitro assays and chemical characterization via HPLC-DAD and GC–MS has been used to determine the interest of Chlorella as a source of functional food ingredients. Results demonstrated that PLE provide higher yields than UAE while similar bioactivities were obtained. Important concentration of carotenoids (lutein, neoxanthin, β-carotene, etc.), chlorophylls, sterols, phytols, and fatty acids (among others) have been found in Chlorella extracts that could be correlated to the observed biological activity.