Granulocytes and Cells of Granulocyte Origin—The Relevant Players in Colorectal Cancer

Colorectal cancer (CRC) is one of the most common malignancy and cause of cancer death worldwide, and it still remains a therapeutic challenge for western medicine. There is strong evidence that, in addition to genetic predispositions, environmental factors have also a substantial impact in CRC development. The risk of CRC is attributed, among others to dietary habits, alcohol consumption, whereas physical activity, food containing dietary fiber, dairy products, and calcium supplements have a protective effect. Despite progress in the available therapies, surgery remains a basic treatment option for CRC. Implementation of additional methods of treatment such as chemo- and/or targeted immunotherapy, improved survival rates, however, the results are still far from satisfactory. One of the reasons may be the lack of deeper understanding of the interactions between the tumor and different types of cells, including tumor infiltrating granulocytes. While the role of neutrophils is quite well explored in many cancers, role of eosinophils and basophils is often underestimated. As part of this review, we focused on the function of different granulocyte subsets in CRC, emphasizing the beneficial role of eosinophils and basophils, as well as dichotomic mode of neutrophils action. In addition, we addressed the current knowledge on cells of granulocyte origin, specifically granulocytic myeloid derived suppressor cells (Gr-MDSCs) and their role in development and progression of CRC.     

Microwave and conventional treatment of low-cement high-alumina castables with different water-to-cement ratio; Part II. Dehydration

Modern refractory castables contain between 3.5 and 5?wt.-% water that is necessary for sufficient flow during emplacement and for the formation of hydrate phases, necessary for the green strength of the material. Prior to the high temperature use of this material, it must be dried very carefully to avoid explosive spalling.This paper will demonstrate that beside conventional drying of pre-shaped materials in resistance furnaces microwave radiation is an energy saving and rapid method to remove pore water as well as hydrate bond water from the castable. In comparison to resistance furnaces, the use of microwave radiation does not affect the castable properties as there are mechanical strength (MOR, CCS), open porosity and pore size distribution. This study proved microwave radiation as valuable alternative with a series of tabular alumina based low cement castables (LLC) in which the water-to-cement-ratio (wcr = 0.64, 0.75, 0.82 and 1.13) was systematically altered by changing the cement concentration at constant mixing water concentration of 4.5%.     

Interleukins 6 and 15 Levels Are Higher in Subcutaneous Adipose Tissue,but Obesity Is Associated with Their Increased Content in Visceral Fat Depots

Excess adiposity is associated with chronic inflammation, which takes part in the development of obesity-related complications. The aim of this study was to establish whether subcutaneous (SAT) or visceral (VAT) adipose tissue plays a major role in synthesis of pro-inflammatory cytokines. Concentrations of interleukins (IL): 1β, 6, 8 and 15 were measured at the protein level by an ELISA-based method and on the mRNA level by real-time PCR in VAT and SAT samples obtained from 49 obese (BMI > 40 kg/m²) and 16 normal-weight (BMI 20–24.9 kg/m²) controls. IL-6 and IL-15 protein concentrations were higher in SAT than in VAT for both obese (p = 0.003 and p < 0.0001, respectively) and control individuals (p = 0.004 and p = 0.001, respectively), while for IL-1β this was observed only in obese subjects (p = 0.047). What characterized obese individuals was the higher expression of IL-6 and IL-15 at the protein level in VAT compared to normal-weight controls (p = 0.047 and p = 0.016, respectively). Additionally, obese individuals with metabolic syndrome had higher IL-1β levels in VAT than did obese individuals without this syndrome (p = 0.003). In conclusion, concentrations of some pro-inflammatory cytokines were higher in SAT than in VAT, but it was the increased pro-inflammatory activity of VAT that was associated with obesity and metabolic syndrome.     

Participatory design of a robot for demonstrating an epileptic seizure

ABSTRACT

We present the methodology and results of participatory design of a robot for presenting an epileptic seizure and a scenario of the educational workshop using this robot. Children with epilepsy encounter stigma and stereotypes and may receive inadequate aid when having an epileptic seizure. The goal of the larger project was to use the prototype device in a series of workshops for improving teachers' actions during an epileptic seizure and their attitudes towards epileptic students. In this paper, we show how various design goals for an educational robot were accomplished to fit the needs of all identified stakeholders, particularly people with epilepsy.

We used a co-design (participatory design) approach through a series of meetings participated by members of the association Polish Association for People Suffering from Epilepsy, students and faculty members of the biomedical engineering and robotics departments, teachers, psychologists and medical specialists (epileptologist, neurologist).

These meetings created an opportunity for a better understanding of the (functional and nonfunctional) requirements and resulting tradeoffs and led the participants to find appropriate solutions. Participation of people with epilepsy in the design process allowed them to deal with the potentially stereotyped representation of themselves. The prototype robot, therefore, combined goals of various stakeholders, such as an accurate presentation of an epileptic seizure, lightweight, ease of use and control, while preserving the dignity of people with epilepsy.

As a result of the co-designing process, an inexpensive robot was created and used in a series of 10 pilot workshops with 217 participants, mainly teachers of primary and middle schools. Teachers improved their understanding of epilepsy and suggested further improvements to the system.     

Effect of growth twins on strength and microstructural evolution of nanocrystalline aluminum

Journal of Materials Science - The effect of growth-twins on friction, wear, and microstructural evolution of nanocrystalline (NC) aluminum is investigated using molecular dynamics simulations. NC...     

Gas‐phase removal of indoor volatile organic compounds and airborne microorganisms over mono‐ and bimetal‐modified (Pt,Cu, Ag) titanium(IV) oxide nanocomposites

The photocatalytic deactivation of volatile organic compounds and mold fungi using TiO₂ modified with mono‐ and bimetallic (Pt, Cu, Ag) particles is reported in this study. The mono‐ and bimetal‐modified (Pt, Cu, Ag) titanium(IV) oxide photocatalysts were prepared by chemical reduction method and characterized using XRD, XPS, DR/UV‐Vis, BET, and TEM analysis. The effect of incident light, type and content of mono‐ and bimetallic nanoparticles deposited on titanium(IV) oxide was studied. Photocatalytic activity of as‐prepared nanocomposites was examined in the gas phase using LEDs array. High photocatalytic activity of Ag/Pt‐TiO₂ and Cu/Pt‐TiO₂ in the reaction of toluene degradation resulted from improved efficiency of interfacial charge transfer process, which was consistent with the fluorescence quenching effect revealed by photoluminescence (PL) emission spectra. The photocatalytic deactivation of Penicillium chrysogenum, a pathogenic fungi present in the indoor environment, especially in a damp or water‐damaged building using mono‐ and bimetal‐modified (Pt, Cu, Ag) titanium(IV) oxide was evaluated for the first time. TiO₂ modified with mono‐ and bimetallic NPs of Ag/Pt, Cu, and Ag deposited on TiO₂ exhibited improved fungicidal activity under LEDs illumination than pure TiO₂.     

Characterization of Glass Beads Surface Modified with Ionic Surfactants

Knowledge of the wetting characteristic of mineral surfaces is very important in enhancing the efficiency of separation of valuable minerals from gangue using froth flotation or oil agglomeration. In this paper a capillary rise technique was used to characterize the glass beads surface modified with cationic surfactant. The glass microspheres were used as model particles with a spherical shape and smooth surface to eliminate the roughness effect. The value of the contact angle for water was found to be 21.5 for unmodified beads, and 61.8, 89.7, 68.4 for 0.1, 1.0, 10 mg/g_solid of CTAB, and 39.8, 68.6, 87.9 for 0.1, 1.0, 10 mg/g_solid of DDAHCl, respectively. Data revealed that the adsorption of surfactant onto glass beads decreased the value of the electron donor component, γ-, which defines the hydrophobicity of the surface. Also, the property of the surface was investigated by flotation and oil agglomeration experiments. It was observed that particles with low value of contact angle for water and high for 1-bromonaphthalene and low value of γ- were floated with a recovery equal to 91.1 and 83.1% for CTAB and DDAHCl, respectively, and effectively agglomerated. This indicates that the capillary rise method can be successfully used to predict the wetting properties of solid particles in mineral processing.     

Toward Demystifying the Mohs Hardness Scale

Today, the Mohs scale is used profusely throughout educational systems without any persuasive understanding of the fundamental principles. Why one mineral has a scratch hardness over the next culminating in a scale of 1 (chalk) to 10 (diamond) has no atomistic or structure‐sensitive basis that explains this outcome. With modern computationally based atomistic and multiscale models, there is increasing promise of defining the pressure and rate‐dependent parameters that will allow a fundamental understanding of the Mohs scale. This study principally addresses the combined fracture and plasticity parameters that qualitatively affect fracture at the nanoscale. A physical model wherein the crack tip under a scratch is shielded by dislocations is supported by molecular dynamics (MD) simulations in both ductile aluminum and brittle silicon carbide. Next, this model is applied to nanoindentation data from the literature to produce a ranking of Mohs minerals based on their fundamental properties. As such, what is presented here is a first step to address the flow and fracture parameters ultimately required to provide a figure of merit for scratch hardness and thus the Mohs scale.