Monitoring Support for Water Distribution Systems based on Pressure Sensor Data

Water Resources Management - The increasing age and deterioration of drinking water mains is causing an increasing frequency of pipe bursts. Not only are pipe repairs costly, bursts might also lead...     

Hydrodynamical particle containment in a rotor‐stator spinning disk device

A novel type of rotor‐stator spinning disk device is proposed which allows for the entrapment of solid particles solely by hydrodynamic means. In this new configuration, the solid rotating disk is replaced with two conjoined rotors with a variable gap spacing. Liquid is fed through the top stator and can flow out again through the rotor‐rotor interior and the hollow rotation axis. Moreover, the volume between the two rotors is optionally filled with a highly porous reticulated carbon foam. It was found that particle containment was strongly improved by the presence of this reticulated foam as it hinders the buildup of centripetal boundary layer flow near the disks in the interior of the rotor‐rotor assembly. These centripetal boundary layers drag along particles resulting in a loss of containment. Experiments utilizing glass beads showed that particles with a diameter down to 17.8 µm can be completely entrapped when a carbon foam is placed between the two conjoined disks at rotor speeds up to the maximum investigated value of 178 rad s^?1. Additionally, the rotor‐rotor gap did not have an effect on the particle entrapment level when the reticulated carbon foam was omitted and can be ascribed to the build‐up of boundary layers, which is independent of rotor‐rotor distance. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3656–3665, 2015     

Design methodology for barrier‐based two phase flow distributor

The barrier‐based distributor is a multiphase flow distributor for a multichannel microreactor which assures flow uniformity and prevents channeling between the two phases. For N number of reaction channels, the barrier‐based distributor consists of a gas manifold, a liquid manifold, N barrier channels for the gas, N barrier channels for the liquid, and N mixers for mixing the phases before the reaction channels. The flow distribution is studied numerically using a method based on the hydraulic resistive networks (RN). The single phase hydraulic RN model (Commenge et al., 2002;48:345–358) is extended for two phases gas‐liquid Taylor flow. For Re_GL <30, the accuracy for the model was above 90%. The developed‐model was used to study the effects of fabrication tolerance and barrier channel dimensions. A design methodology has been proposed as an algorithm to determine the required hydraulic resistance in the barrier channels and their dimensions. This methodology is demonstrated using a numerical example. © 2012 American Institute of Chemical Engineers AIChE J, 2012     

Inter-rater reliability of a video-analysis method measuring low-back load in a field situation

Valid and reliable low-back load assessment tools that can be used in field situations are needed for epidemiologic studies and for ergonomic practice. The aim of this study was to assess the inter-rater reliability of a low-back load video-analysis method in a field setting.     

Increasing X-ray image interpretation competency of cargo security screeners

X-ray screening of containers and unit load devices in the area of cargo shipping is becoming an essential and common feature at ports and airports all over the world. The detection of prohibited items in X-ray images is a challenging task for screening officers as they need to know which items are prohibited and what they look like in X-ray images. The main aim of this study was to investigate whether X-ray image interpretation competency of cargo security screeners can be increased by computer-based training. More specifically, effects of training were investigated by conducting tests before training started and after approximately three months of training. Moreover, it was examined whether viewing X-ray images in pseudo color would lead to a better detection performance compared to when X-ray images are shown in greyscale. Recurrent computer-based training resulted in large performance increases after three months. No significant difference in detection performance could be found for tests when using X-ray images in greyscale vs. pseudo color.     

Limiting withdrawal rate and maximum film thickness during dip-coating of titania sols onto a Si substrate

The article highlights new insights into production of thin titania films widely used as catalyst support in many modern reactors including capillary microreactors, microstructured fixed-bed reactors and falling film microreactors. Dip-coating of a titania sol onto a Si substrate has been studied in the range of the sol viscosities of 1.5-2.5 mPa s and the sol withdrawal rates of 0.2-18 mm/s. Different viscosities of sols were created by addition of desired amounts of nitric acid to the synthesis mixture of titanium isopropoxide and Pluronic F127 in ethanol which allowed to control the rate of the condensation reactions. Uniform mesoporous titania coatings were obtained at the solvent withdrawal rates below 10 mm/s at sol viscosities in the range from 1.6 mPa s to 2.5 mPa s. There exists a limiting withdrawal rate corresponding to a capillary number of ca. 0.01 beyond which uniform titania films cannot be obtained. Below the limiting withdrawal rate, the coating thickness is a power function of the sol viscosity and withdrawal rate, both with an exponent of 2/3. The limiting withdrawal rate increases as the solvent evaporation rate increases and it decreases as the sol viscosity increases.     

Tailoring the Separation Behavior of Hybrid Organosilica Membranes by Adjusting the Structure of the Organic Bridging Group

Hybrid organically linked silica is a highly promising class of materials for the application in energy‐efficient molecular separation membranes. Its high stability allows operation under aggressive working conditions. Herein is reported the tailoring of the separation performance of these hybrid silica membranes by adjusting the size, flexibility, shape, and electronic structure of the organic bridging group. A single generic procedure is applied to synthesize nanoporous membranes from bridged silsesquioxane precursors with different reactivities. Membranes with short alkylene (CH₂ and C₂H₄) bridging groups show high H₂/N₂ permeance ratios, related to differences in molecular size. The highest CO₂/H₂ permeance ratios, related to the affinity of adsorption in the material, are obtained for longer (C₈H₁₆) alkylene and aryl bridges. Materials with long flexible alkylene bridges have a hydrophobic surface and show strongly temperature‐dependent molecular transport as well as a high n‐butanol flux in a pervaporation process, which is indicative of organic polymerlike properties. The versatility of the bridging group offers an extensive toolbox to tune the nanostructure and the affinity of hybrid silica membranes and by doing so to optimize the performance towards specific separation challenges. This provides excellent prospects for industrial applications such as carbon capture and biofuel production.     

Generalised Procrustes Analysis with optimal scaling: Exploring data from a power supplier

Generalised Procrustes Analysis (GPA) is a method for matching several, possibly large, data sets by fitting them to each other using transformations, typically rotations. The linear version of GPA has been applied in a wide range of contexts. A non-linear extension of GPA is developed which uses Optimal Scaling (OS). The approach is suited to match data sets that contain nominal variables. A database of a Dutch power supplier that contains many categorical variables unfit for the usual linear GPA methodology is used to illustrate the approach.     

In the eye of the beholder: Perceived, actual, and peer-rated similarity in personality, communication, and friendship intensity during the acquaintanceship process.

The authors examined associations of perceived similarity, actual similarity, and peer-rated similarity in personality with friendship intensity during the acquaintanceship process in a naturalistic setting. Self- and peer-rated personality data were gathered from undergraduates (mean age = 18.9) at 5 time points during the first year of university using a round-robin design. Whereas perceived similarity and peer-rated similarity in personality were concurrently associated with more friendship intensity for just-acquainted individuals, actual similarity in personality was not. Further, bidirectional cross-lagged associations between perceived similarity and friendship intensity were found. Peer-rated similarity was also associated with increases in friendship intensity, and this association was mediated by communication frequency. These results indicate that specific types of similarity in personality are differentially associated with friendship intensity during early phases of acquaintanceship in a real-life setting. Further, insight was provided in the direction of causality between similarity and attraction: Perceived and peer-rated similarity seem to breed friendship intensity, whereas friendship intensity seems to breed perceived similarity only. Finally, peers’ expectations seem to affect individuals’ communicative behaviors, which in turn affect friendship formation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)