A vectorial vibrating reed magnetometer with high sensitivity

A vibrating reed magnetometer with high sensitivity is constructed. Using optical signal pickup, modified excitation coils, and an acoustical reference excitation system, the high sensitivity of former constructions is combined with the detection of the magnetization component perpendicular to the bias field H. The calibration procedure providing increased reliability is simplified and allows hysteresis measurements with the magnetic easy axis of the sample oriented at an arbitrary angle with respect to H. Measurement results are given in order to demonstrate the performance of the apparatus     

Study of a BGO calorimeter using electron and hadron beams from 1 to 50 GeV

A calorimeter of 25 bismuth germanate (BGO) crystals equipped with silicon photodiode readout has been tested at the CERN SPS in the energy range 1–50 GeV. The response for electrons has been shown to be linear in this energy range and the rms resolution obtained ( ) is approximately 1%, for E > 4 GeV. The electron/pion separation was found to be better than 1:500 in the energy range 1–20 GeV. Data on lateral and longitudinal shower development were compared with the results of a Monte Carlo simulation using the SLAC-EGS program and found to be in good agreement.     

A Radiation Imaging Detector Made by Postprocessing a Standard CMOS Chip

An unpackaged microchip is used as the sensing element in a miniaturized gaseous proportional chamber. This letter reports on the fabrication and performance of a complete radiation imaging detector based on this principle. Our fabrication schemes are based on wafer-scale and chip-scale postprocessing. Compared to hybrid-assembled gaseous detectors, our microsystem shows superior alignment precision and energy resolution, and offers the capability to unambiguously reconstruct 3D radiation tracks on the spot.     

Experimental Study of Alumina Particle Removal From a Plane surface

Micron and submicron alumina particles are often used for the mechanical polishing of the GaAs wafers processed in the microelectronic industry. A better understanding of the adhesion mechanisms is the key factor for the particle removal and for the optimisation of the industrial chemical cleaning. However, the nature and the strength of the complex interactions occurring between asymmetrical alumina particles and the surface remain unclear. Thus, an experimental study of the detachment of asymmetrical alumina particles in adhesive contact with a glass plate was done using a specially designed shear stress flow chamber. A series of experiments was performed to measure the shear stress necessary to remove individual alumina particles (of 3 and 0.3 µm nominal size) under various chemical solutions (diluted ammonia, surfactant and glycerol). Then the effects of the particle size, the resting time, the pH and the nature of the chemical solutions used for the removal of the alumina particles was characterised in terms of percentage of alumina particles detached. Results have shown that the longer the resting time, the more adherent the particles are. Moreover, it was found that the ammonia solution gives the best particle removal rate (80%) because of the strong repulsive electrostatic interactions between the alumina particles and the glass surface, both being charged negatively in a basic solution.     

Synthesizing Energy-Efficient Embedded Systems with LOPOCOS

In this paper, we introduce the LOPOCOS (Low Power Co-synthesis) system, a prototype CAD tool for system level co-design. LOPOCOS targets the design of energy-efficient embedded systems implemented as heterogeneous distributed architectures. In particular, it is designed to solve the specific problems involved in architectures that include dynamic voltage scalable (DVS) processors. The aim of this paper is to demonstrate how LOPOCOS can support the system designer in identifying energy-efficient hardware/software implementations for the desired embedded systems. Hence, highlighting the necessary optimization steps during design space exploration for DVS enable architectures. The optimization steps carried out in LOPOCOS involve component allocation and task/communication mapping as well as scheduling and dynamic voltage scaling. LOPOCOS has the following key features, which contribute to this energy efficiency. During the voltage scaling valuable power profile information of task execution is taken into account, hence, the accuracy of the energy estimation is improved. A combined optimization for scheduling and communication mapping based on genetic algorithm, optimizes simultaneously execution order and communication mapping towards the utilization of the DVS processors and timing behaviour. Furthermore, a separation of task and communication mapping allows a more effective implementation of both task and communication mapping optimizationsteps. Extensive experiments are conducted to demonstrate the efficiency of LOPOCOS. We report up to 38% higher energy reductions compared to previous co-synthesis techniques for DVS systems. The investigations include a real-life example of an optical flow detection algorithm.     

Fluorescence flow cytometry of human leukocytes in the detection of LDL receptor defects in the differential diagnosis of hypercholesterolemia

A flow-cytometric method with fluorescence-labeled monoclonal antibodies (MABs) against the low density lipoprotein (LDL) receptor (C7A MAB) or 3,3'-dioctadecylindocarbocyanin-iodide (DiI) LDL has been developed that allows the quantification of LDL receptors on leukocytes and the identification of patients with familial hypercholesterolemia (FH) within 48 hours. Leukocytes were isolated from 10 mL anticoagulated blood by density gradient centrifugation. To induce maximal expression of LDL receptors, mononuclear cells were preincubated with either phytohemagglutinine (PHA) or lipoprotein-deficient serum (LPDS). LPDS-treated monocytes provided a more homogeneous cell population with regard to LDL receptor activity than did the PHA-treated lymphocytes; they also provided a greater discrimination between the fluorescence of the receptor probes and cellular autofluorescence. The C7A MAB was able to compete for DiI LDL binding by about 40%. In competition with unlabeled LDL, DiI LDL revealed linear binding, indicating an affinity similar to native LDL. The binding characteristics of DiI LDL were also similar to 125I-LDL binding. LDL isolated from familial defective apolipoprotein B-100 was not able to compete for DiI LDL binding on monocytes, whereas native LDL reduced it by about 80%. In monocytes from FH heterozygous patients, the cellular mean fluorescence using either C7A MAB or DiI LDL at 4 degrees C was 30% to 70%; in FH homozygotes, cellular mean fluorescence was less than 20% of that in monocytes from normal individuals. In patients with familial defective apolipoprotein B-100 antibody binding was normal, but one patient's own LDL failed to compete with normal DiI LDL for 4 degrees C binding on U937 test monocytes. Patient monocytes having internalization defects showed normal 4 degrees C DiI LDL binding, but at 20 degrees C cell-associated fluorescence was reduced by about 40%. In our study 384 hypercholesterolemic patients (preselected according to serum cholesterol levels, clinical symptoms, and family history) were analyzed for LDL receptor expression using the C7A MAB-based assay. In 71.8% of the patients with cholesterol levels higher than 300 mg/dL, an LDL receptor deficiency was observed. Apolipoprotein E isoforms and lipoprotein[a] were found to be independent from the LDL receptor status. In some patients with high cholesterol levels but normal LDL receptor expression with the C7A MAB assay, LDL receptor defects could be diagnosed when either reduced binding or internalization of DiI LDL or familial defective apolipoprotein B-100 was detected.(ABSTRACT TRUNCATED AT 400 WORDS)     

Reactively sputtered MoO3 films for ammonia sensing

We report the gas-sensing properties of ion-beam sputter deposited MoO₃ thin-films. The change in the DC conductivity was measured in dry N₂ with 10% O₂ in the presence of up to 490 ppm of NH₃, NO, NO₂, C₃H₆, CO and H₂. At ∼440 °C the film was found to be very sensitive to NH₃, with 490 ppm increasing the conductivity by approximately a factor of 70. This was approximately 17 times greater than the response to the other gases. The NH₃ response was strongly affected by the accompanying levels of O₂, NO₂ and H₂O. For example, changing the accompanying O₂ levels from 1% to 20% decreased the NH₃ response by approximately a factor of 20. Similarly, the presence of 100 ppm NO₂ (in 10% O₂) decreased the NH₃ response by approximately a factor of three, and 1% water vapor decreased it by more than a factor of two. The NH₃ response, however, was relatively unaffected by 100 ppm of accompanying NO, C₃H₆, CO or H₂. XPS measurements show that the increased conductivity in the presence of NH₃ was also accompanied by a partial reduction of the surface MoO₃. We observed an increase in the resistance of the films after extended time at elevated temperatures.     

"Comment on 'Articulation of values'": Response to Cochran (1988).

We respond to Cochran's critique of our 1986 study, which was in part a replication of Cochran's original grid methodology for the study of career values. (PsycINFO Database Record (c) 2010 APA, all rights reserved)