Expression and Roles of Individual HIF Prolyl 4-Hydroxylase Isoenzymes in the Regulation of the Hypoxia Response Pathway along the Murine Gastrointestinal Epithelium

The HIF prolyl 4-hydroxylases (HIF-P4H) control hypoxia-inducible factor (HIF), a powerful mechanism regulating cellular adaptation to decreased oxygenation. The gastrointestinal epithelium subsists in “physiological hypoxia” and should therefore have an especially well-designed control over this adaptation. Thus, we assessed the absolute mRNA expression levels of the HIF pathway components, Hif1a, HIF2a, Hif-p4h-1, 2 and 3 and factor inhibiting HIF (Fih1) in murine jejunum, caecum and colon epithelium using droplet digital PCR. We found a higher expression of all these genes towards the distal end of the gastrointestinal tract. We detected mRNA for Hif-p4h-1, 2 and 3 in all parts of the gastrointestinal tract. Hif-p4h-2 had significantly higher expression levels compared to Hif-p4h-1 and 3 in colon and caecum epithelium. To test the roles each HIF-P4H isoform plays in the gut epithelium, we measured the gene expression of classical HIF target genes in Hif-p4h-1^−/−, Hif-p4h-2 hypomorph and Hif-p4h-3^−/− mice. Only Hif-p4h-2 hypomorphism led to an upregulation of HIF target genes, confirming a predominant role of HIF-P4H-2. However, the abundance of Hif-p4h-1 and 3 expression in the gastrointestinal epithelium implies that these isoforms may have specific functions as well. Thus, the development of selective inhibitors might be useful for diverging therapeutic needs.     

Fault tolerant machine learning for nanoscale cognitive radio

We introduce a machine learning-based classifier that identifies free radio channels for cognitive radio. The architecture is designed for nanoscale implementation, under nanoscale implementation constraints; we do not describe all physical details but believe future physical implementation to be feasible. The system uses analog computation and consists of cyclostationary feature extraction and a radial basis function network for classification. We describe a model for nanoscale faults in the system, and simulate experimental performance and fault tolerance in recognizing WLAN signals, under different levels of noise and computational errors. The system performs well under expected non-ideal manufacturing and operating conditions.     

Effect of boron addition on the microstructure and mechanical properties of 6.5% V-5% W high speed steel

The effect of adding 0.04% additional boron to 6.5% V-5% W high speed steel was investigated. The microstructure characterization, phase identification, and carbide identification of the materials were performed using SEM/EDS and XRD. The cell size and carbide volume fraction were examined using image analysis software. The boron distribution was observed by PTA Boron Tracking. The addition of 0.04% more boron to a HSS alloy exerted a cell refining effect on the sample. The cell refinement of dendritic structures in the alloy containing boron may be attributed to the constitutional supercooling effect associated with the fairly small distribution coefficient for boron in iron. The addition of boron increases the bending strength of the material by more than 10%, as well as increasing its hardness.     

Enzymatic membrane reactors: the determining factors in two separate phase operations

A two separate phase‐enzymatic membrane reactor is an attractive process since it has a large interfacial area and exchange surfaces, simultaneous reaction and separation and other benefits. Many factors influence its successful operation, and these include characteristics of the enzyme, membrane, circulating fluids and reactor operations. Although the operating conditions are the main factor, other factors must be considered before, during or after its application. At the initial stage of reactor development, the solubility of substrates and products, type of operation, membrane material and size, enzyme preparation and loading procedure, and cleanliness of the recirculated fluids should be specified. The immobilization site, reactor arrangement, dissolved or no‐solvent operation, classic or emulsion operation and immobilized or suspended enzyme(s) are determined later. Some factors still need further studies. Utilization of the technology is described for use from multigram‐ to plant‐scale capacity to process racemic and achiral compounds. The racemates were resolved primarily by kinetic resolution, but dynamic kinetic resolution has been exploited. The technology focused on hydrolytic reactions, but esterification processes were also exploited. Copyright © 2011 Society of Chemical Industry     

Understanding Our Students: A Longitudinal‐Study of Success and Failure in Engineering With Implications for Increased Retention

In spite of considerable research about the poor retention rate of undergraduate engineering students, we still have an inadequate understanding of the factors that affect students' decisions to remain in engineering programs and their ability to perform well enough to be retained. Although continued study is needed of external factors such as curricular requirements, admissions criteria, and test scores, we also need to know much more about the relationships between curricular experiences and students' learning styles, habits, and attitudes. The work presented in this paper was designed to enhance educators' understanding of the factors that underlie the concern about student retention in engineering. By observing 1,000 engineering students during their first three years in college, the research team generated a large database on the students' academic and non‐academic characteristics as well as their successes and failures. The traits discovered not only support many findings from previous studies but also reveal some new relationships that could prove essential to designing an educational environment that will prepare engineers for success in the future.     

A microwave transmission-line network guiding electromagnetic fields through a dense array of metallic objects

We present measurements and simulations of a transmission-line network that has been designed for cloaking applications in the microwave region. Here the network is not used for cloaking but for channelling electromagnetic fields through an electrically dense array of metal objects, which alone is basically impenetrable to the impinging electromagnetic radiation. With the designed transmission-line network the waves emitted by a source placed in an air-filled waveguide are coupled into the network and guided through the array of metallic objects. Our goal is to illustrate the simple manufacturing, assembly, and the general feasibility of cloaking devices based on the transmission-line approach. Most importantly, we demonstrate both with measurements and with numerical simulations the excellent coupling of waves between the network and the surrounding medium.     

Direction finding receiver for UWB impulse radio signal in multipath environment

In this paper, we propose a direction finding (DF) receiver for ultra wideband impulse radio (UWB‐IR) signal in a realistic multipath environment. The receiver uses an array of antenna, where each antenna is connected to a proposed propagation‐delay estimation structure. The advantage of the proposed structure is that it outputs a trapezoidal signal whose amplitude reflects the propagation delay and thus relaxes the sampling rate requirement of the analog‐to‐digital‐converter (ADC). The angle‐of‐arrival (AOA) is estimated from the vector of propagation delays measured with respect to reference antenna. Because these estimated delays contain outliers, we propose a simple AOA estimation algorithm based on minimum fractional‐distance search. Experimental results based on simulation show that the proposed DF receiver achieves better performance compared with the minimum ?₁‐ and ?₂‐based (least‐squares based) distance search. Copyright © 2010 John Wiley & Sons, Ltd.     

Enhancement of the thermal stability and mechanical properties of a PMMA/aluminum trihydroxide composite synthesized via bead milling

The use of aluminum trihydroxide (ATH) fillers as non-halogen flame retardants for polymethylmethacrylates (PMMA) creates a conflict between the mechanical properties and heat resistance of the composites. Therefore, to ensure that the PMMA mechanical properties remain satisfactory, improvements in both the filler–polymer interactions and the ability to control the size and size distribution, morphology and dispersion of the fillers are required. Thus, in the present study, bead milling was used to control both the size distribution and dispersion of ATH fillers in MMA, which had an initial average size of 0.75 μm. The dispersion was obtained by alteration of the surface characteristics of ATH fillers using a silane-based dispersing agent, (3-acryloxypropyl) trimethoxysilane (APTMS). Bead milling successfully comminuted the ATH particles and prevented the formation of ATH agglomerates. The smallest average size of the ATH particles after bead milling was 300 nm. Highly dispersed ATH filler particles were observed in the TEM images of the PMMA/ATH composites. The filler–polymer interaction, i.e. the interaction parameter (B), was calculated. The effects of volume fraction, particle size distribution, and surface modification of the fillers on the results of dynamic mechanical analysis (DMA) are discussed. The thermal stability of the PMMA/ATH composites was also investigated using thermal gravimetric analysis (TGA).     

Tobacco-specific nitrosamines in new tobacco products.

New tobacco products, designed to attract consumers who are concerned about the health effects of tobacco, have been appearing on the market. Objective evaluation of these products requires, as a first step, data on their potentially toxic constituents. Tobacco-specific nitrosamines (TSNAs) are an important class of carcinogens in tobacco products, but virtually no data were available on their levels in these products. In the present study, we analyzed several new products-Ariva, Stonewall, Exalt, Revel, Smokey Mountain, and Quest-for TSNAs and compared their TSNA levels with those in nicotine replacement products and conventional smokeless tobacco and cigarette brands. TSNAs were not detected in Smokey Mountain, which is a tobacco-free snuff product. The lowest levels among the new products containing tobacco were in Ariva and Stonewall (0.26-0.28 microg/g wet weight of product). The highest levels in the new products were found in Exalt (3.3 microg/g tobacco), whereas Revel and Quest had intermediate amounts. Only trace amounts were found in nicotine replacement products, and conventional brands had levels consistent with those reported in the literature. These results demonstrate that TSNA levels in new tobacco products range from relatively low to comparable with those found in some conventional brands.     

Replication of sub‐micron features using amorphous thermoplastics

A comprehensive experimental study was carried out to replicate sub‐micron features using the injection molding technique. For the experiments, five different plastic materials were selected according to their flow properties. The materials were polycarbonate (PC), styrene‐butadiene block copolymer (SBS), impact modified poly(methyl methacrylate), methyl methacrylate‐acrylonitrile‐butadiene‐styrene polymer (MABS), and cyclic olefin copolymer (COC). Nanofeatures down to 200‐nm line width and with aspect ratios (aspect ratio = depth/width) of 1:1 could be replicated. In all selected materials, the greatest differences between the materials emerged when the aspect ratio increased to 2:1. The most favorable results were obtained with the use of high flow polycarbonate as the molding material. The best replication results were achieved when melt and mold temperatures were higher than normal values.