Trace metals in the marine bivalve Macoma balthica in the westerschelde estuary, The Nertherlands. Part 3: Variability of the role of cytosol in metal uptake by the clams

Tellinid clams Macoma balthica were sampled every 2 months for 2.5 years at two locations from the Westerschelde estuary (The Netherlands) and submitted to in vitro short-term exposure to Cd, Cu and Zn. Total and heat-stable cytosolic metal concentrations have been measured before and after exposure to study the effects of the sampling season on metal uptake by the bivalve. We observed much higher uptakes of Cd and, to a lesser extent, Cu in winter than in summer, while Zn appears to be constantly regulated. These phenomena are amplified in the cytosol, especially for Cd, a non-essential element, for which the concentrations after exposure can reach 35–45 μg·g⁻¹ (dry wt.) in winter, but only a maximum of 0.5 μg·g⁻¹ in summer, all natural values being between 0.01 and 0.1 μg·g⁻¹ on average. The contents (μg) of the various elements, either at the total or at the cytosolic level, are not constant, hence showing that the seasonal body weight fluctuation of the clams (dilution or concentration effect) is not the only parameter responsible for the metal uptake variability. Furthermore, we have shown that the proportion of cytosolic metal is not constant, but increases with the absolute cytosolic concentration up to 35–40. Therefore, the cytosolic phase of the cells plays a growing role in Cd, Cu and Zn storage as long as their total concentration increases.     

Is activity-based working impacting health,work performance and perceptions? A systematic review

ABSTRACT

Numerous claims have been made about the benefits of activity-based working (ABW) on workers’ health and work performance. Yet, it is unclear if these claims are proven. This systematic review aims to establish whether there is an evidence base for the effects of ABW on health, work performance and perceptions of the work environment. Eight databases were searched in September 2016. Three reviewers independently screened titles and abstracts and assessed the studies and extracted the data. Seventeen studies involving 36,039 participants were included. The study designs varied in rigorousness from qualitative studies to pre–post-trials and in sample size ranging from 12 to 11,799. This review found that ABW has positive merits in the areas of interaction, communication, control of time and space, and satisfaction with the workspace; however, it is unfavourable for concentration and privacy. For physical and mental health, the evidence is equivocal. ABW seems to be a promising concept that can be implemented and promoted based on some benefits for work performance and perceptions of the work environment when it is coupled with appropriate management support and organization. More high-quality research is needed to strengthen the evidence base further and establish its health effects.     

Enzymatic Evidence for a Revised Congocidine Biosynthetic Pathway

Naturally produced pyrrolamides, such as congocidine, are nonribosomal peptides that bind to the minor groove of DNA. Efforts to delineate the biosynthetic machinery responsible for their assembly have mainly employed genetic methods, and the enzymes responsible for their biosynthesis remain largely uncharacterized. We report the biochemical characterization of four proteins involved in congocidine formation: the adenylation‐thiolation (A–T) di‐domain Cgc18(1–610), its MbtH‐like partner SAMR0548, the AMP‐binding enzyme Cgc3*, and the T domain Cgc19. We assayed the ATP‐dependent activation of various commercially available and chemically synthesized compounds with Cgc18(1–610) and Cgc3*. We report the revised substrate specificities of Cgc18(1–610) and Cgc3*, and loading of 4‐acetamidopyrrole‐2‐carboxylic acid onto Cgc19. Based on these biochemical studies, we suggest a revised congocidine biosynthetic pathway.     

Utility of Multivariate Analysis in Modeling the Effects of Raw Material Properties and Operating Parameters on Granule and Ribbon Properties Prepared in Roller Compaction

This article aimed to model the effects of raw material properties and roller compactor operating parameters (OPs) on the properties of roller compacted ribbons and granules with the aid of principal component analysis (PCA) and partial least squares (PLS) projection. A database of raw material properties was established through extensive physical and mechanical characterization of several microcrystalline cellulose (MCC) and lactose grades and their blends. A design of experiment (DoE) was used for ribbon production. PLS models constructed with only OP-modeled roller compaction (RC) responded poorly. Inclusion of raw material properties markedly improved the goodness of fit (R²?=?.897) and model predictability (Q²?=?0.72).     

Direct utilization of methanol on impregnated Ni/YSZ and Ni-Zr0.35Ce0.65O2/YSZ anodes for solid oxide fuel cells

Some of the limits on fuel cell development include the issues of hydrogen availability and storage. Methanol has many advantages as an alternative fuel for fuel cells but depending on the anode composition, the formation of carbon may be a problem. In this paper, the direct utilization of methanol in solid oxide fuel cells with impregnated Ni/YSZ and Ni-Zr_0.35Ce_0.65O_2−δ (ZDC)/YSZ anodes was investigated at 1073 K. Performance and stability of these anodes, as measured by steady-state polarization and electrochemical impedance spectroscopy, were improved by the presence of ZDC; although, the deposition of carbon, as detected by scanning electron microscopy and temperature-programmed oxidation analysis, was not entirely avoided. The impact of the carbon, however, was different depending on the anode. That is, carbon formation caused the delamination of impregnated Ni/YSZ anodes, while the structural integrity of Ni-ZDC/YSZ anodes was maintained and the cell performance was not negatively impacted. Increasing the fuel utilization decreased coking, as predicted by equilibrium calculations.     

Environmentalism and the multinational corporation: a viewpoint‐part II

This is Part Two of a two‐part paper on environmentalism and the multinational corporation. Part One was published in the previous issue of this journal.

In Part One, we explored the concept of “power as capability” as seen in the rationale for international production, namely, ownership, locational, and internalization advantages. In this Part, we apply the concept of “power as influence” to re‐examine the bargaining power of the host country, the MNC, the home country, and Non‐Governmental Organizations. It is argued that in the initial bargaining with LDC host country, the power balance is tipped in favor of MNC as the lack of technical expertise may hinder feasibility assessment of pollution performance. However, over time, the bargaining power of LDC host increases, but constrained by the momentum of globalization. The power of the MNC is higher in manufacturing than in extractive industries. Home country plays an important role in influencing the formulating of corporate environmental policies by the MNC. The influence of NGOs is minimal while a lack of effective international pressure on MNCs arises from the non‐existence of a powerful a supranational IGO.     

Civil engineers' managerial roles and needs: report of survey

Attitudes to the monetary risks associated with business decisions are thought to vary in response to at least three identifiable stimuli: the amount of money involved, background economic conditions and the framing of the decision. This paper reports a study of peoples' attitude to risk before and after a real turning point in the real business cycle. This work sheds light on the extent to which (i) risk attitudes remain robust when economic conditions change, (ii) risk attitude is influenced by whether the choice problem is concerned with losses or with gains, and (iii) risk attitude may be subordinated to some other dominating objective.     

High density polyethylene/acrylonitrile butadiene rubber blends: Morphology,mechanical properties,and compatibilization

Polymer blends based on high-density polyethylene (HDPE) and acrylonitrile butadiene rubber (NBR) were prepared by a melt blending technique. The mixing parameters such as temperature, time, and speed of mixing were varied to obtain a wide range of properties. The mixing parameters were optimized by evaluating the mechanical properties of the blend over a wide range of mixing conditions. The morphology of the blend indicated a two-phase structure in which NBR phase was dispersed as domains up to 50% of its concentration in the continuous HDPE matrix. However, 70 : 30 NBR/HDPE showed a cocontinuous morphology. The tensile strength, elongation at break, and hardness of the system were measured as a function of blend compostion. As the polymer pair is incompatible, technological compatibilization was sought by the addition of maleic-modified polyethylene (MAPE) and phenolic-modified polyethylene (PhPE). The interfacial activity of MAPE and PhPE was studied as a function of compatibilizer concentration by following the morphology of the blend using scanning electron micrographs. Domain size of the dispersed phase showed a sharp decrease by the addition of small amounts of compatibilizers followed by a leveling off at higher concentrations. Also, more uniformity in the distribution of the dispersed phase was observed in compatibilized systems. The tensile strength of the compatibilized systems showed improvement. The mechanical property improvement, and finer and uniform morphology, of compatibilized systems were correlated with the improved interfacial condition of the compatibilized blends. The experimental results were compared with the current theories of Noolandi and Hong. © 1995 John Wiley & Sons, Inc.