The use of (green field) biomass pretreatment liquor for fermentative butanol production and the catalytic oxidation of biobutanol

In this study, pretreatment liquor of acid-stored green and yellowish barley silage was used for fermentative acetone–butanol–ethanol (ABE) production. Further, the catalytic oxidation of biobutanol over Pt catalysts was studied to investigate the behaviour of butanol as a fuel in the combustion engine. After the hydrothermal treatment of green and yellowish barley silage followed by enzymatic hydrolysis, approximately 88% and 100% of the available sugars were recovered, respectively. Batch fermentations of pretreatment barley silage liquor, supplemented with gelatinised barley grain, showed good fermentability with total ABE concentrations of 9.0 g/L and 10.9 g/L. Butanol yields of 0.20, 0.17 and ABE yields of 0.28, 0.26 (g/g monosaccharide) were obtained, respectively. In catalytic activity measurements, the conversion of biobutanol became appreciable in the 120–140 °C range, whereas conversions greater than 95% were obtained over 200 °C. Selectivities were also high, although formation of by-products, such as butyraldehyde, was observed.     

Underground space in land-use planning

In 1988, the Finnish Ministry of the Environment appointed a committee to review existing planning systems for underground construction. In its report in spring 1990, the committee concluded that current legislation and planning procedures were unsatisfactory. In response, a study on “Underground Space in the Planning and Land Use” was launched in June 1994, and was completed in summer 1996. The study formed part of Finland's Rock Engineering 2000 programme. The study reviewed the present situation in underground planning; examined current uses of underground facilities; created a basic method for the classifying the building potential of rock areas, identified the various methods currently available for assessing the environmental impacts of underground construction on the basis of the legislation in force (EIA); to developed methods for assessing the costs to the urban community of underground space, particularly in comparison with equivalent costs of space aboveground; and drafted a proposal concerning planning of different level and permit procedures for underground space. This paper discusses each aspect of the study.     

Crafting a planning issue with citizens in the context of planning competition: a case of ‘Nordic Superblock’

ABSTRACT

This paper describes the formation of the planning issue ‘Nordic Superblock’ through the early planning phase of the Hiedanranta area in Tampere, Finland. The workshops with citizens and professionals as participants, held after a planning competition, were an important part of the area’s initial planning. The paper argues that the superblock issue emerged because the institutional context differed from the traditional zoning process. Furthermore, the issue itself challenged the traditional planning process and the current urban development regime. The case is a promising example of the outcome of expert–citizen interaction; however, it also reveals some bottlenecks in the planning process.     

How much nitrogen is fixed by biological symbiosis in tropical dry forests? 2. Herbs

Although biological nitrogen fixation (BNF) is considered the main input of N in mature and regenerating native tropical vegetation, it has seldom been quantified. Biomass and N accumulation and fixation were determined for spontaneously occurring herbaceous species in caatinga areas in four regeneration stages (2, 17, 39 and >50?years after abandonment from agricultural use). BNF was estimated using the ¹⁵N natural-abundance method. The 2-year regeneration area had the highest total herb (6,355?kg?ha^?1) and legume (262?kg?ha^?1) biomass production, N stocks (82?kg?ha^?1) and fixed N (5.0?kg?ha^?1). N₂-fixing legumes (nine species in the sampled area) contributed over 97?% of legume biomass in all areas. Macroptilium gracile added the largest amount of N (3.9?kg?ha^?1 in the 2-year regeneration area) because of its large biomass production (205?kg?ha^?1), although it was not the species with the highest proportion of fixed N (76?%). All of the N₂-fixing species obtained large proportions of their N from symbiosis, most of them more than 50?%.However, the amounts of fixed N per unit area were relatively low (0.22?C5.00?kg?ha^?1) because the biomass of N₂-fixing species was always less than 5?% of the total herb biomass.     

Perspective of the preparation of agrichars using fossil hydrocarbon coke

The increasing demand of fossil fuels and decreasing light oil proven reserves lead to a future scenario of abundant coke production from the refinement of non-conventional fossil hydrocarbons. This paper highlights the possibility of using coke as an agrichar for preparing fertile soils resembling Amazonian terra preta. It is suggested that this alternative may contribute to both the capture of greenhouse gas by afforestation and the increase of rainfall by the albedo effect. It is proposed that the ideal agrichar must function as a store of nutrients in the form of graphene substituted NPK groups at the micropore molecular structure, providing habitat for plant friendly microorganism inside its macropores. The possibility of a sink effect connecting nutrient storage with microorganisms has also been proposed. A preliminary discussion on the possible coking procedures to improve the resulting agrichar efficacy, three options for large scale desert greening using agrichar as well as recommendations for further research are presented.     

Two Methods for Fast Ray‐Cast Ambient Occlusion

Ambient occlusion has proven to be a useful tool for producing realistic images, both in offline rendering and interactive applications. In production rendering, ambient occlusion is typically computed by casting a large number of short shadow rays from each visible point, yielding unparalleled quality but long rendering times. Interactive applications typically use screen‐space approximations which are fast but suffer from systematic errors due to missing information behind the nearest depth layer. In this paper, we present two efficient methods for calculating ambient occlusion so that the results match those produced by a ray tracer. The first method is targeted for rasterization‐based engines, and it leverages the GPU graphics pipeline for finding occlusion relations between scene triangles and the visible points. The second method is a drop‐in replacement for ambient occlusion computation in offline renderers, allowing the querying of ambient occlusion for any point in the scene. Both methods are based on the principle of simultaneously computing the result of all shadow rays for a single receiver point.     

Extrusion of YAG Tubes Shows that Bottom‐up Processing is Not Always Optimal

Liquid‐feed flame spray pyrolysis provides easily dispersed, unaggregated nanopowders with average particle sizes of 20–70 nm depending on the processing conditions. Their chemical compositions can be controlled to ppm levels via control of the initial precursor solution. In this paper, Y₃Al₅O₁₂ composition nanopowders are produced that are atomically mixed but offer a hexagonal crystal structure rather than a YAG structure. Y₂O₃ and δ‐Al₂O₃ nanopowders are also produced and mixed to evaluate reactive sintering. It is shown that nanopowder/polymer mixtures permit the extrusion of tubes that retain their shape on debindering and sintering to ≥95% theoretical density. More importantly, the sintering behavior of hex‐Y₃Al₅O₁₂ is compared with that of tubes formed using 3:5 Y₂O₃:δ‐Al₂O₃ mixtures to test the so‐called bottom‐up paradigm, which suggests that mixing on the finest length scales should provide optimal control of sintering rates, final densities, and grain sizes. Instead, it is found that reactive sintering is faster and offers better control of final grain sizes. Dense sintered tubes are translucent, and dimensional uniformity is maintained from extrusion through sintering.     

Micromorphological studies of surface densified wood

Scots pine (Pinus sylvestris L.) wood was surface densified in its radial direction in an open press with one heated plate to obtain a higher density on the wood surface whilst retaining the overall thickness of the sample. This study investigated the effect of temperature (100, 150 and 200 °C) and press closing speed (5, 10 and 30 mm/min, giving closing times of 60, 30 and 10 s, respectively) on the micromorphology of the cell-wall, as well as changes occurring during set-recovery of the densified wood. The micromorphology was analysed using scanning electron microscopy (SEM) combined with a sample preparation technique based on ultraviolet-excimer laser ablation. Furthermore, the density profiles of the samples were measured. Low press temperature (100 °C) and short closing time (10 s) resulted in more deformation through the whole thickness, whilst increasing the temperature (150 and 200 °C) and prolonging the closing time (30 and 60 s) enabled more targeted deformation closer to the heated plate. The deformation occurred in the earlywood regions as curling and twisting of the radial cell-walls, however, no apparent cell-wall disruption or internal fracture was observed, even at low temperatures and fast press closing speed, nor after soaking and drying of the samples. In the SEM-analysis after soaking and drying, it was noticed that the cells did not completely recover their original form. Thus, part of the deformation was considered permanent perhaps due to viscoelastic flow and plastic deformation of the cell-wall components.