Microstructural Investigation on Failure of Internal Drive Shaft

17-4 PH stainless steel is used as internal drive shaft material in liquid engine pumps. One of the drive shafts failed during operation. The shaft pieces were in contact for short duration after failure, which has resulted in abrasion of fractured surfaces. Samples from the location of failure were taken, and investigation of the failure was carried out using optical and scanning electron microscopy. The microstructural analysis of the material and fractographic analysis of the fractured surface show that the failure was caused by excessive torsion.     

A.c. conductivity studies on the silver molybdo-arsenate glassy system

A new quaternary fast-ion conducting silver molybdo-arsenate [Agl-Ag₂O-(MoO₃ + As₂O₅)] (SMA) glassy system has been prepared using the melt-quenching technique for various dopant salt (Agl) concentrations by fixing the formers (MoO₃ + As₂O₅) composition and the modifier (Ag₂O) to formers (M/F) ratio. The prepared compounds were characterized by X-ray diffraction. The impedance measurements were made on different Agl compositions of the SMA glasses as a function of frequency (6.5 Hz–65 kHz) and temperature (303–343 K), using the Solatron frequency-response analyser (model 1250). The bulk conductivity and the appropriate physical model (equivalent circuit) of the SMA glass were obtained from the impedance analysis. The a.c. conductivity was calculated for different Agl compositions of SMA glasses at various temperatures and the obtained a.c. conductivity results were analysed using Jonscher's Universal Law. The conduction mechanism for the highest conducting SMA glassy compound has been explained using the diffusion path model.     

Dynamic provisioning in multi-tenant service clouds

Cloud-based systems promise an on-demand service provisioning system along with a ??pay-as-you-use?? policy. In the case of multi-tenant systems this would mean dynamic creation of a tenant by integrating existing cloud-based services on the fly. Presently, dynamic creation of a tenant is handled by building the required components from scratch. Although multi-tenant systems help providers save cost by allocating multiple tenants to the same instance of an application, they incur huge reconfiguration costs. Cost and time spent on these reconfiguration activities can be reduced by re-constructing tenants from existing tenant configurations supported by service providers. Multi-tenant cloud-based systems also lack the facility of allowing clients to specify their requirements. Giving clients the flexibility to specify requirements helps them avoid spending an excessive amount of time and effort looking through a list of services, many of which might not be relevant to them. Moreover, dynamic provisioning in the cloud requires an integrated solution across the technology stack (software, platform and infrastructure) combining functional, non-functional and resource allocation requirements. Existing research works in the area of web service matching, although numerous, still fall short, since they usually consider each requirement type in isolation and cannot provide an integrated solution. To that end, in this paper we investigate the features needed for dynamic service provisioning on the cloud. We propose a novel User Interface-Tenant Selector-Customizer (UTC) model and approach, which enables cloud-based services to be systematically modeled and provisioned as variants of existing service tenants in the cloud. Our approach considers functional, non-functional and resource allocation requirements, which are explicitly specified by the client via the user interface component of the model. To the best of our knowledge, ours is the first such integrated approach. We illustrate our ideas using a realistic running example, and also present a proof-of-concept prototype built using IBM??s Rational Software Architect modeling tool. We also present experimental results demonstrating the applicability of our matching algorithm. Our results show significant reduction in matching time with the help of an elimination process that reduces the search space needed for performing matching.     

Hydrogen production from used lubricating oils

Used lubricating oils (lube oils) are generated throughout the year and collected in central locations in many communities. Disposing lube oil in an improper manner contaminates environment to a great degree. Used lube oil can be valuable as a re-refined lubricant or as an energy source. Lube oil is a complex mixture of aliphatic and polycyclic hydrocarbons formulated to withstand high service temperatures in internal combustion engines. Both synthetic and mineral oils contain a high concentration of hydrogen (about 13–14 wt%). At the Florida Solar Energy Center, we have developed a process that converts lube oils to hydrogen and other valuable low molecular weight hydrocarbons. The lube oil reformation experiments were carried out using several commercially available dehydrogenation catalysts at a range of reactor temperatures and pressures, residence times and steam to carbon ratios. In this paper, the data obtained to date and the results are presented and discussed.     

Mixing matrix estimation using discriminative clustering for blind source separation

Mixing matrix estimation in instantaneous blind source separation (BSS) can be performed by exploiting the sparsity and disjoint orthogonality of source signals. As a result, approaches for estimating the unknown mixing process typically employ clustering algorithms on the mixtures in a parametric domain, where the signals can be sparsely represented. In this paper, we propose two algorithms to perform discriminative clustering of the mixture signals for estimating the mixing matrix. For the case of overdetermined BSS, we develop an algorithm to perform linear discriminant analysis based on similarity measures and combine it with K-hyperline clustering. Furthermore, we propose to perform discriminative clustering in a high-dimensional feature space obtained by an implicit mapping, using the kernel trick, for the case of underdetermined source separation. Using simulations on synthetic data, we demonstrate the improvements in mixing matrix estimation performance obtained using the proposed algorithms in comparison to other clustering methods. Finally we perform mixing matrix estimation from speech mixtures, by clustering single source points in the time-frequency domain, and show that the proposed algorithms achieve higher signal to interference ratio when compared to other baseline algorithms.     

Characteristic study of N07718 superalloy surface prepared by cold spray

For better performance in erosive–corrosive, wear and other extreme environmental conditions surface properties of metals and alloys are usually altered by different techniques. Amongst the various surface coating techniques cold spraying is a relatively new and less reported method. Coating formation at energy lower than the melting stage of materials brings novelty to this process. In this study surface of UNS No. - N07718 alloy is altered by cold spraying chromium-carbide (nickel-chromium) layer. The microstructure properties of this cold sprayed surface are observed by various characterization techniques and the results are used to study mechanism of coating layer formation by cold spray process. This newly developed cold sprayed surface is found to be eligible for further testing in wear and erosive-corrosive environmental conditions.     

Dielectric‐coated conducting curvilinear surface electrostatic model for spacecraft charging applications

In this article, free space capacitance of dielectric‐coated conducting curvilinear surfaces is obtained using method of moments (MOM). The surfaces are discretized using triangular subsections. The curvilinear surfaces are represented by quadratic parametric elements. The MOM based on the pulse basis function and point matching is used. The integrand is divided into a regular and a singular part. The regular part of the integral is numerically evaluated by using the Gaussian quadrature algorithm for triangles. The Duffy transformation is used to evaluate the singular part of the integrals. Computed results are given for the capacitance of the dielectric‐coated conducting cylinder of finite axial length and truncated cone, and compared with the previously published results. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

A theoretical investigation of the emerging standards for web services

Currently, standards for web services are being developed via three different initiatives (W3C, Semantic web services and ebXML). To the best of our knowledge, no theoretical perspectives underlie these standardization efforts. Without the benefit of a strong theoretical basis, the results, within and across these initiatives, have remained piecemeal. We suggest ‘Language–Action Theories’ as a plausible perspective that can effectively define, assess and refine web services standards. In this paper, we first investigate the existing initiatives to identify commonalities that point to theories of ‘Language–Action’ as an appropriate theoretical basis for web services standards. Next, we adapt work from these theories to develop a comprehensive reference framework for understanding web services standards. Finally, we use this reference framework to assess the three initiatives, and analyze the findings to provide insights for future development and refinement of web services standards.

Concepts and Application of Time-Limiters to High Resolution Schemes

A new class of implicit high-order non-oscillatory time integration schemes is introduced in a method-of-lines framework. These schemes can be used in conjunction with an appropriate spatial discretization scheme for the numerical solution of time dependent conservation equations. The main concept behind these schemes is that the order of accuracy in time is dropped locally in regions where the time evolution of the solution is not smooth. By doing this, an attempt is made at locally satisfying monotonicity conditions, while maintaining a high order of accuracy in most of the solution domain. When a linear high order time integration scheme is used along with a high order spatial discretization, enforcement of monotonicity imposes severe time-step restrictions. We propose to apply limiters to these time-integration schemes, thus making them non-linear. When these new schemes are used with high order spatial discretizations, solutions remain non-oscillatory for much larger time-steps as compared to linear time integration schemes. Numerical results obtained on scalar conservation equations and systems of conservation equations are highly promising.     

An investigation of the electrical transport properties of graphene-oxide thin films

The electrical transport properties of graphene-oxide (GO) thin films were investigated. The GO was synthesized by a modified Hummers method and was characterized by X-ray diffraction and UV-visible spectroscopy. The thin film of GO was made on a Si/SiO₂ substrate by drop-casting. The surface morphology of the GO film was analyzed by using scanning electron microscopy and atomic force microscopy techniques. Temperature dependent resistance and current-voltage measurements were studied using four-terminal method at various temperatures (120, 150, 175, 200, 250 and 300 K) and their charge transport followed the 3D variable range hopping mechanism which was well supported by Raman spectra analysis. The presence of various functional groups in GO were identified by using high resolution X-ray photo electron (XPS) and Fourier transform infra red (FT-IR) spectroscopic techniques. Graphene-oxide thin film field effect transistor devices show p-type semiconducting behavior with a hole mobility of 0.25 cm² V⁻¹ s⁻¹ and 0.59 cm² V⁻¹ s⁻¹ when measured in air and vacuum respectively.