Nanolayer CrAlN/TiSiN coating designed for tribological applications

With the goal to produce a hard and tough coating intended for tribological applications, CrAlN/TiSiN nanolayer coating was prepared by alternative deposition of CrAlN and TiSiN layers. In the first part of the article, a detailed study of phase composition, microstructure, and layer structure of CrAlN/TiSiN coating is presented. In the second part, its mechanical properties, fracture and tribological behavior are compared to the nanocomposite TiSiN coating. An industrial magnetron sputtering unit was used for coating deposition. X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were used for compositional and microstructural analysis. Mechanical properties and fracture behavior were studied by instrumented indentation and focused ion beam techniques. Tribological properties were evaluated by ball-on-disk test in a linear reciprocal mode. A complex layer structure was found in the nanolayer coating. The TiSiN layers were epitaxially stabilized inside the coating which led to formation of dislocations at interfaces, to introduction of disturbances in the coating growth, and as a result, to development of fine-grained columnar microstructure. Indentation load required for the onset of fracture was twice lower for the nanolayer CrAlN/TiSiN, compared to the nanocomposite TiSiN coating. This agrees very well with their mechanical properties, with H³/E² being twice higher for the TiSiN coating. However, the nanolayer coating experienced less severe damage, which had a strong impact on tribological behavior. A magnitude of order lower wear rate and four times lower steady state friction coefficient were found for the nanolayer coating.     

Investigation the correlation between chemical structure and swelling,thermal and flocculation properties of carboxymethylcellulose hydrogels

Hydrophilic polymer networks (hydrogels) based on sodium carboxymethylcellulose (NaCMC) and polycarboxylic acids (oxalic, succinic, citric and adipic) as cross-linking agents are synthesized by esterification reaction; one series of NaCMC hydrogels cross-linked with citric acid is prepared with acrylamide and acrylic acid (Aam/Aac) copolymers using the design of semi-interpenetrating polymer networks (semi-IPN), in order to increase their potential application for flocculation purposes. The Infrared spectroscopy (FTIR) of hydrogels confirms the esterification reaction between NaCMC and cross-linking agents. Results of swelling measurements show that citric acid in the amount of 15 wt% gives the hydrogels with the best absorption capacity. The results of Differential scanning calorimetry (DSC) and Thermal gravimetric analysis (TGA) show no significant difference in thermal properties of neat and semi-interpenetrating NaCMC hydrogels. The amorphous nature of hydrogels is confirmed by X-ray diffraction analysis (XRD). The results of flocculation study show that combination of NaCMC network and Aam/Aac copolymer with initial mass ratio of 10/90 creates a theoretical platform for the production of flocculant which could show high efficacy in purifying of water dominated by positively charged particles.     

Corrosion behaviour of AA2024 aluminium alloy in different tempers in NaCl solution and with the CeCl3 corrosion inhibitor

The paper analyses the corrosion behaviour of naturally and artificially aged AA2024 alloy in NaCl solution and in the presence of an environment-friendly corrosion inhibitor, CeCl₃. On the basis of the values of polarisation resistance and corrosion current density, the corrosion resistance of the protective inhibitor film is established as well as the general corrosion resistance of this aluminium alloy. Resistance to pit formation is determined based on the difference in pitting and corrosion potentials while resistance to pit growth is determined based on the amount of charge consumed during pit growth. A scanning electron microscope is used to examine the morphology of the pits formed during the pitting corrosion testing, as well as to determine the cerium content on intermetallic particles and the matrix AA2024 alloy. The corrosion behaviour of AA2024 alloy is investigated after different test periods in NaCl solution and in the same solution with the CeCl₃ inhibitor. The corrosion resistance of both tempers of AA2024 alloy is more than one order of magnitude higher in the presence of CeCl₃. An explanation of the observed differences in the corrosion behaviour of the naturally and artificially aged AA2024 alloy is proposed. Different corrosion behaviour of the alloy after different test periods is also explained.     

Predictive association of metal–organic systems in the solid-state: the molecular electrostatic potential based approach

Designing crystalline solids with improved properties or performances remains a challenging task, despite great strides that have been made within the field of crystal engineering since its birth several decades ago. Herein, we are bringing examples that illustrate recent successes in taking supramolecular synthetic guidelines from the organic crystal engineering and adjusting those to metal-containing systems, particularly to the lower-dimensional ones. The versatility of calculated molecular electrostatic potential (MEP) as a new crystal engineering tool is demonstrated.     

A comparative study of photocatalytically active nanocrystalline tetragonal zyrcon-type and monoclinic scheelite-type bismuth vanadate

Monoclinic scheelite-type BiVO₄ is currently considered as one of the most promising non-titania photocatalysts, wheras tetragonal zircon-type BiVO₄ is still poorly understood. Herein, a new and simple synthetic approach was applied and nanostructured single-phase zircon-type BiVO₄ was successfully prepared by a controllable ethylene-glycol colloidal route. In addition, nanostructured monoclinic scheelite-type BiVO₄ powders were also fabricated through annealing of the as-prepared samples. A comparative study of the two BiVO₄ polymorphs was conducted and it turned out that the novel synthetic approach had a significant impact on porosity and photocatalytic performance of zircon-structured BiVO₄. All the prepared materials, as-prepared and annealed, were mesoporous, while measured values of specific surface area of some zircon-structured samples (～34?m²/g) were ～7 times higher than those reported thus far for this phase. Interestingly, for the first time, zircon-type BiVO₄, previously considered to be a poor photocatalyst, exhibited a better overall performance in degradation of methyl orange compared to monoclinic scheelite-type BiVO₄. Hence, it could be expected that the here-presented synthesis and observations will both arouse interest in scarcely studied tetragonal zircon-type BiVO₄ and facilitate as well as speed up further research of its properties.     

In-situ immobilization of Sr radioactive isotope using nanocrystalline hydroxyapatite

Hydroxyapatite was used as the inert matrix for in-situ immobilization of strontium (Sr) radioactive isotopes at room temperature. A nano-emulsification method was applied to synthesize Sr-substituted calcium hydroxyapatite (Ca_1?xSr_x)₁₀(PO₄)₆(OH)₂. The concentration of incorporated Sr was in the range of 0 ≤ x ≤ 1. Immobilization of Sr was evaluated using a stable isotope instead of radioactive isotope. The effect of strontium concentration on the crystal structure was studied and the results have showed that in the whole concentration range, Sr forms solid solutions with the host hydroxyapatite crystal structure. Powders comprised of nanometre sized particles were obtained and their properties, such as crystallite and particle size, changes in lattice parameters as function of dopant content and thermal stability, were further examined. It was found that the crystal structure of obtained powders is thermally stable at high temperatures. No secondary phases were formed in as-prepared powders or during calcination. The results in this study showed that nano-emulsion strategy provides a simple pathway for synthesis of a single-phase Sr-substituted hydroxyapatite, which can be used for immobilization of Sr radioactive isotopes.     

A shift of the perceptual attributes of color due to the manifestation of the simultaneous contrast effect on a display

This research shows the effect of simultaneous contrast on a design solution that generates it, and it also shows how its manifestation affects the shift of perception attributes of the observer's color. In the conducted research, 55 subjects had to harmonize the primary stimuli from the reproduction obtained with the help of digital printing technology, with the primary stimuli presented on two computer screens. As a visual harmonization technique, simultaneous binocular harmonization was used. The primary stimuli were made achromatic, with a 50% Raster Tone value (RTV), and are surrounded by achromatic secondary stimuli whose values increase in steps from 10% RTV up to 100% RTV. A shift in the perceptual attributes of color has been shown with the help of the CIEDE2000 system. Using ANOVA with repeated-measures and Fisher's post hoc analysis, statistically significant differences were found between the perceived means of shift in the ΔC₀₀ chroma and ΔL₀₀ lightness on defined samples on both computer screens, while in the case of the ΔH₀₀ hue, no statistically significant differences were observed. The research also determined colorimetric differences in the ΔE₀₀ color difference. Moreover, the student's t test was used to determine that the effect is stronger when manifested on the Lenovo computer than on the Asus computer screen (P < .05).