Natural denitrification in the Kakamigahara groundwater basin,Gifu prefecture,central Japan

Although nitrate is recognized as the most common groundwater contaminant due to growing anthropogenic sources, such as agriculture in particular, its adverse effects on human and animal health are debatable. The current issue, however, is to control and reduce nitrate contamination with regards to the long residence time of groundwater within aquifers. Denitrification has recently been recognized for its ability to reduce high nitrate concentrations in groundwater. The Kakamigahara groundwater basin, Gifu prefecture, Japan, witnessed rising levels of nitrate (>12 mg/l NO(3)-N) originating from agricultural sources. Chemical analyses for the determination of major constituents of groundwater and delta(15)N of residual nitrate were performed on representative groundwater samples in order to fulfill two main objectives. One is to investigate the current situation of nitrate groundwater pollution. The second objective is to determine whether the denitrification is a potential natural mechanism, which eliminates nitrate pollution in the Kakamigahara aquifer. Agricultural nitrate contamination of groundwater was obvious from characteristically high concentrations of Ca(2+), Mg(2+), NO(3)(-) and SO(4)(2-). High nitrate concentrations were found on the eastern side of the basin in association with vegetable cultivation fields, and decreased gradually towards the west of the basin along the direction of groundwater flow. The decrease of nitrate concentration was conveniently coupled with increase of HCO(3)(-) (the heterotrophic denitrification product), pH and delta(15)N of residual nitrate (due to isotopic fractionation) from east to west. Therefore, denitrification in situ is continuously removing nitrate from the Kakamigahara groundwater system.     

Nitric Oxide and Reactive Oxygen Species in the Pathogenesis of Preeclampsia

Preeclampsia (PE) is characterized by disturbed extravillous trophoblast migration toward uterine spiral arteries leading to increased uteroplacental vascular resistance and by vascular dysfunction resulting in reduced systemic vasodilatory properties. Its pathogenesis is mediated by an altered bioavailability of nitric oxide (NO) and tissue damage caused by increased levels of reactive oxygen species (ROS). Furthermore, superoxide (O₂⁻) rapidly inactivates NO and forms peroxynitrite (ONOO⁻). It is known that ONOO⁻ accumulates in the placental tissues and injures the placental function in PE. In addition, ROS could stimulate platelet adhesion and aggregation leading to intravascular coagulopathy. ROS-induced coagulopathy causes placental infarction and impairs the uteroplacental blood flow in PE. The disorders could lead to the reduction of oxygen and nutrients required for normal fetal development resulting in fetal growth restriction. On the other hand, several antioxidants scavenge ROS and protect tissues against oxidative damage. Placental antioxidants including catalase, superoxide dismutase (SOD), and glutathione peroxidase (GPx) protect the vasculature from ROS and maintain the vascular function. However, placental ischemia in PE decreases the antioxidant activity resulting in further elevated oxidative stress, which leads to the appearance of the pathological conditions of PE including hypertension and proteinuria. Oxidative stress is defined as an imbalance between ROS and antioxidant activity. This review provides new insights about roles of oxidative stress in the pathophysiology of PE.     

Strength of spline joints assembled by forming

In this paper, a new assembling method of spline joints that enables tight fitting in a simple manner by allowing slight plastic deformation at the spline teeth was introduced. Experiments were carried out for the spline joints of medium carbon steel varying the overlap zone between the male and the female spline teeth. Axial joining strength was increased with increase in the overlap length due to the residual compressive stress by forming. The joint by the proposed method also showed higher torsional strength than the conventional joint. Improvement in the torsional strength was explained based on the deformation and hardness distribution around the spline teeth. With respect to the shape of overlap zone, better results were obtained when using the specimen having a uniform overlap length along the axial direction.     

Electron Holography Studies on Narrow Magnetic Domain Walls Observed in a Heusler Alloy Ni50Mn25Al12.5Ga12.5

Peculiar magnetic domain walls produced in Heusler alloys, which have attracted renewed interest due to their potential application to actuators and spintronic devices, are studied here using electron holography. The observations reveal unexpectedly narrow magnetic domain walls, the width of which showed perfect agreement with that of the antiphase boundaries (APB, e.g., only 3 nm). While the results can be explained by the significant depression of ferromagnetism due to the local chemical disorder, the electron phase shift indicates that ferromagnetic correlation still remains in the APB region.     

Polymer electrolyte membrane with nanomatrix channel prepared by sulfonation of natural rubber grafted with polystyrene

High‐proton‐conductive polymer electrolyte with a nanomatrix channel was prepared by graft copolymerization of styrene onto deproteinized natural rubber followed by sulfonation with chlorosulfonic acid. First, natural rubber latex was purified with urea in the presence of surfactant to remove almost all proteins present in the rubber. Second, graft copolymerization of styrene onto deproteinized natural rubber was carried out with tert‐butyl hydroperoxide/tetraethylenepentamine as an initiator at 30°C in latex stage. The graft‐copolymerized natural rubber (DPNR‐graft‐PS) was sulfonated with chlorosulfonic acid in chloroform solution at an ambient temperature. The resulting sulfonated DPNR‐graft‐PS was characterized by FTIR spectroscopy, solid state ¹³C CP/MAS NMR spectroscopy, elemental analysis, and transmission electron microscopy. High proton conductivity of about 0.1 S/cm, less water uptake of 24 wt % and comparatively good stress at break of 9 MPa were accomplished at suitable contents of styrene units and sulfur, i.e., 32 wt % and 75 mol %, respectively. The high proton conductivity, excellent stability, and good mechanical properties were associated with not only the formation of the nanomatrix channel but also a specific concentration of sulfuric acid group. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Fiber volume control of composite materials by loss angle

Fiber volume plays a critical role in achieving stable mechanical and physical properties in composite structures. This study develops a method to control this parameter in carbon fiber reinforced plastics (CFRPs) on the basis of the viscoelastic character of the thermosetting matrix resin. This method relies on the loss angle δ to quantitatively control fiber volume. CFRP flat panels are manufactured at varying initiating times of pressure application depending on the δ value of the CFRP matrix resin. An analysis of the manufactured panels clearly shows that the target fiber volumes can be obtained at an appropriate δ range. Specifically, CFRP fiber volumes can be controlled through the loss angle of the matrix resin. Defining this δ range is very important for establishing mechanically and physically stable CFRP structures. POLYM. COMPOS., 37:1307–1311, 2016. © 2014 Society of Plastics Engineers     

Biomechanical Evaluation of Ti-Nb-Sn Alloy Implants with a Low Young’s Modulus

Dental implants are widely used and are a predictable treatment in various edentulous cases. Occlusal overload may be causally related to implant bone loss and a loss of integration. Stress concentrations may be diminished using a mechanobiologically integrated implant with bone tissue. The purpose of this study was to investigate the biomechanical behavior, biocompatibility and bioactivity of a Ti-Nb-Sn alloy as a dental implant material. It was compared with cpTi. Cell proliferation and alkaline phosphatase (ALP) activity were quantified. To assess the degree of osseointegration, a push-in test was carried out. Cell proliferation and ALP activity in the cells grown on prepared surfaces were similar for the Ti-Nb-Sn alloy and for cpTi in all the experiments. A comparison between the Ti-Nb-Sn alloy implant and the cpTi implant revealed that no significant difference was apparent for the push-in test values. These results suggest that implants fabricated using Ti-Nb-Sn have a similar biological potential as cpTi and are capable of excellent osseointegration.     

Diffusion-limited characteristics of mechanically induced currents in polypyrrole/Au-membrane composites

A mechanically induced current (MIC) in a polypyrrole/Au-coated membrane (PPy/Au-membrane) composite with various surface morphologies was investigated, and the electrolyte conditions were determined in an electrochemical cell. A MIC was induced on porous PPy/Au-membranes with a thin layer of PPy. Conversely, relatively small MICs were observed in non-highly porous films such as freestanding films and PPy/Au-membranes with thick PPy deposits. A MIC smaller by one order of magnitude was also observed in a Au-membrane without PPy. These results indicated that the MICs was due to a charging phenomenon in both the redox and the double layer capacitances. The MIC also varied with supporting electrolyte and their concentration. The MIC was strongly reduced in solutions with diluted electrolytes and with bulky cationic electrolytes, indicating that the number and the penetration speed of mobile ions limited the magnitude of the MIC. These characteristics indicated that the MIC was essentially a diffusion limited current. A two-electrode MIC cell was also configured to investigate a power generation film in a normal saline solution, which can possibly be utilized for biomedical applications.