High-temperature stabilization of polypropylene using hindered phenol–thioester stabilizer combinations,Part 1: Optimization and efficacy via nondust blends

The thermal degradation of unstabilized polypropylene has been investigated under long-term processing (twin extruder) and thermal aging at 150°C, with additive concentration studies on combinations of an established hindered phenolic antioxidant (pentaerythritol tetrakis (3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate) [S1010] and two popular thioesters (distearyl-3,3′-thiodipropionate [DSTDP] and didodecyl-3,3′-thiodipropionate [DLTDP]) using melt flow rate, carbonyl index and powder diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) (FTIR), and differential scanning calorimetry (DSC) (oxidation induction time [OIT]) and ultimate embrittlement time (Fracture) on injection-molded test pieces. It was found that 20:80 phenol:thioester ratios provided the best long-term thermal stability (LTTS); however, this was the reverse for processing stabilization (80:20), underlining the antioxidant nature of the two stabilizers (long term vs. melt). Melt preblending of the stabilizers (to form a no-dust blend) gave rise to improved LTTS. DRIFTS FTIR indicated that there was an improvement in preblending the additives, which removed any volatile impurities. Increased additive dispersion and localized potential efficacy in the stabilization cycle is important, as well as possible improved addition of the additives to the extruder rather than fine powder. The data are discussed in relation to the long-term stabilization of polypropylene in high-temperature applications such as under the bonnet of automobiles where minimizing stabilizer losses and maximizing synergy are important.     

Endometriosis detection and localization in laparoscopic gynecology

Multimedia Tools and Applications - Endometriosis is a common gynecologic condition typically treated via laparoscopic surgery. Its visual versatility makes it hard to identify for non-specialized...     

Quaternäre Metall/Metalloxid‐Katalysatoren als Wandkatalysatoren in Mikroreaktoren für Power‐to‐Gas‐Applikationen mittels kombinatorischer Hochdurchsatzmethoden

Catalysts of quaternary composition have been prepared and tested for the Sabatier process. For catalyst syntheses the following techniques have been used: sol‐gel methods, wet impregnation and incipient wetness impregnation. The Sabatier reaction was carried out at temperatures between 520 K and 670 K, pressures of 15 bar and 30 bar using a mixture H₂:CO₂ of 4:1. Activity screening of the microscale wall catalysts was performed by a custom‐built 10‐fold parallel gas‐flow microreactor setup in sequential operating mode. To analyze the gas phase compositions GC‐FID was used.     

Quantification and elucidation of the UV-light triggered initiation kinetics of TPO and BAPO in liquid acrylate monomer

The initiation kinetics of two important UV-light-triggered initiators for the radical polymerization [diphenyl-2,4,6-trimethyl benzoyl phosphine oxide (TPO) and phenyl-bis(2,4,6-trimethyl benzoyl) phosphine oxide (BAPO)] has been quantified in dependence on the initiator concentration (0.25–2 mol %), the light intensity at 365 nm (0–2000 mW cm⁻²), the thickness of the sample (50–200 μm), the temperature (25–80 °C), the monomer [2-ethyl hexyl acrylate (EHA) and 2-ethyl hexyl methacrylate (EHMA)] and the atmosphere (oxygen free and air) directly in the liquid acrylate monomer. The determination of the kinetic parameters was done by applying two independent procedures: (1) following the initiator decay with respect to the irradiation time, evaluated by radiometric measurements of the UV-light absorption at 365 nm and (2) via titration of the initiation process by using defined under-stoichiometric to stoichiometric amounts of TEMPO as inhibitor, evaluated by means of FTIR-ATR spectroscopy. The validity of the titration procedure was proven by means of ¹³C and ³¹P NMR studies of ¹³C-labeled TPO and was explained by a Lewis acid/base interaction between the carbonyl carbon of the initiator and the oxygen of TEMPO. Both methods resulted in very close kinetic parameters. Thus, reliable values for the extinction coefficients ε₃₆₅ at 365 nm, for the effective rate constants of the α cleavage (containing the quantum yield and the initiator efficiency) when dissolved in the liquid monomer could be provided for both initiators for the first time. The effect of dioxygen quenching in dependence of sample thickness and the temperature dependence on the initiation step were evaluated. EHA was compared with EHMA as liquid monomer, and a yet unmentioned inhibition in case of EHMA was discovered. © 2019 The Authors. Journal of Applied Polymer Science published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48357.     

Optical spectroscopic and electrochemical characterization of oxide films on a ferritic stainless steel

Colored oxide films that form on ferritic stainless steel in a high-temperature, oxidizing environment and correspond to different chemical compositions can cause a deterioration of pitting resistance and corrosion performance. Herein, optical spectroscopic and electrochemical techniques have been used to reveal the relationship between color, chemical composition, and corrosion resistance of oxide films formed in the temperature range from 400°C to 800°C for 30 min and at 800°C for 10, 20, 30, and 60 min. The substrate with a thin and dense passivation film leads to a low pitting potential but high corrosion resistance. Oxide films of yellowish or brownish color formed below 600°C are mainly iron oxides, which correspond to low corrosion resistance. No passivation characteristics can be observed for polarization curves of oxide films formed at 500°C and 600°C. The color of oxide films varies from blue to dark gray with the increase of oxidation time at 800°C. Corrosion resistance changes with different proportions of Fe₃O₄, Cr₂O₃, and FeCr₂O₄. The gray oxide films formed at 800°C for 30 min exhibit the lowest pitting susceptibility and the highest corrosion resistance.     

Investigation of ring-opening polymerization of 5-[2-{2-(2-methoxyethoxy)ethoxy}-ethoxymethyl]-5-methyl-1,3-dioxa-2-one by organometallic catalysts

To develop new polymer-based materials, the design of aliphatic carbonate has received attention and become a well-known cyclic monomer. In view of carbonate ring polymer scope, poly(trimethylene carbonate) (PTMC) has been continuously developed for further applications due to its unique degradability. PTMC bearing oligo ethylene glycol units, PTMCM-MOE3OM, were typically prepared via ring-opening polymerization (ROP) using amidine-based catalysts such as 1,8-diazabicyclo[5.4.0] undec-7-ene (DBU) and benzyl alcohol (BnOH) as an initiator. To improve the polymer molecular weight or other properties, several know-how synthetic catalysts based on organometallic complexes are under consideration as potential catalysts. With the existence of diverse classes of metallic complexes, the inorganic complexes were investigated for their catalytic activity based on tris(dimethylsilyl)amido chelating, bis(phenolate) chelating, and macrocyclic tetradentate (NNNN)-type cyclen chelating with a metal-core of tin (II), scandium (III), lutetium (III), and zinc (II). In this study, we found that involving a Zn(II) dimethylcyclen/alkoxide ligand and Mg complexes could accelerate the reaction and finish the polymerization under ambient conditions within 2 hr. Molecular weight reached 11,000 g/mol (40%) and 8,100 g/mol (> 96%). Subsequently, we concluded that Zn and Mg complexes were high reactivity for initiating the ROP of TMCM-MOE3OM upon steadily degree of polymerization.     

N-Substituted Nipecotic Acids as (S)-SNAP-5114 Analogues with Modified Lipophilic Domains

Potential mGAT4 inhibitors derived from the lead substance (S)-SNAP-5114 have been synthesized and characterized for their inhibitory potency. Variations from the parent compound included the substitution of one of its aromatic 4-methoxy and 4-methoxyphenyl groups, respectively, with a more polar moiety, including a carboxylic acid, alcohol, nitrile, carboxamide, sulfonamide, aldehyde or ketone function, or amino acid partial structures. Furthermore, it was investigated how the substitution of more than one of the aromatic 4-methoxy groups affects the potency and selectivity of the resulting compounds. Among the synthesized test substances (S)-1-{2-[(4-formylphenyl)bis(4-methoxyphenyl)-methoxy]ethyl}piperidine-3-carboxylic acid, that features a carbaldehyde function in place of one of the aromatic 4-methoxy moieties of (S)-SNAP-5114, was found to have a pIC₅₀ value of 5.89±0.07, hence constituting a slightly more potent mGAT4 inhibitor than the parent substance while showing comparable subtype selectivity.     

Sperm metabolism is altered during storage by female insects: evidence from two-photon autofluorescence lifetime measurements in bedbugs

We explore the possibility of characterizing sperm cells without the need to stain them using spectral and fluorescence lifetime analyses after multi-photon excitation in an insect model. The autofluorescence emission spectrum of sperm of the common bedbug, Cimex lectularius, was consistent with the presence of flavins and NAD(P)H. The mean fluorescence lifetimes showed smaller variation in sperm extracted from the male (tau m, τ_m = 1.54–1.84 ns) than in that extracted from the female sperm storage organ (tau m, τ_m = 1.26–2.00 ns). The fluorescence lifetime histograms revealed four peaks. These peaks (0.18, 0.92, 2.50 and 3.80 ns) suggest the presence of NAD(P)H and flavins and show that sperm metabolism can be characterized using fluorescence lifetime imaging. The difference in fluorescence lifetime variation between the sexes is consistent with the notion that female animals alter the metabolism of sperm cells during storage. It is not consistent, however, with the idea that sperm metabolism represents a sexually selected character that provides females with information about the male genotype.