Er3+-Yb3+ ions doped fluoro-aluminosilicate glass-ceramics as a temperature-sensing material

The transparent Er³⁺-Yb³⁺-doped fluoro-aluminosilicate glass-ceramic (GC) was prepared by melt-quenching. The crystal phase, morphology, and up-conversion (UC) luminescence of as-produced GC were characterized by X-ray diffraction, scanning electron microscopy, and fluorescence spectrophotometry, respectively. The results show that BaYF₅ nanocrystals were uniformly distributed in the glass matrix of the as-produced GC. When the as-produced GC was subjected to heat treatment, the crystallinity was increased, but the crystal identity remains unchanged. Such heat-treatment doubled the intensity of the UC luminescence, and this enhancement was ascribed to the increased incorporation of both Er³⁺ and Yb³⁺ ions into the lower phonon energy environment of BaYF₅ nanocrystals. Furthermore, the heat-treated GC was stable against further crystallization, and consequently its UC luminescence was stable at the application temperature. The heat-treated GC was found to possess an outstanding temperature-sensing capability.     

Identification of Novel Fragments Binding to the PDZ1-2 Domain of PSD-95

Inhibition of PSD-95 has emerged as a promising strategy for the treatment of ischemic stroke, as shown with peptide-based compounds that target the PDZ domains of PSD-95. In contrast, developing potent and drug-like small molecules against the PSD-95 PDZ domains has so far been unsuccessful. Here, we explore the druggability of the PSD-95 PDZ1-2 domain and use fragment screening to investigate if this protein is prone to binding small molecules. We screened 2500 fragments by fluorescence polarization (FP) and validated the hits by surface plasmon resonance (SPR), including an inhibition counter-test, and found four promising fragments. Three ligand efficient fragments were shown by ¹H,¹⁵N HSQC NMR to bind in the small hydrophobic P⁰ pockets of PDZ1-2, and one of them underwent structure-activity relationship (SAR) studies. Overall, we demonstrate that fragment screening can successfully be applied to PDZ1-2 of PSD-95 and disclose novel fragments that can serve as starting points for optimization towards small-molecule PDZ domain inhibitors.     

Small-Molecule Inhibitors of METTL3, the Major Human Epitranscriptomic Writer

The RNA methylase METTL3 catalyzes the transfer of a methyl group from the cofactor S-adenosyl-L-methionine (SAM) to the N⁶ atom of adenine. We have screened a library of 4000 analogues and derivatives of the adenosine moiety of SAM by high-throughput docking into METTL3. Two series of adenine derivatives were identified in silico, and the binding mode of six of the predicted inhibitors was validated by protein crystallography. Two compounds, one for each series, show good ligand efficiency. We propose a route for their further development into potent and selective inhibitors of METTL3.     

Structural Aspects of P2-Type Na0.67Mn0.6Ni0.2Li0.2O2 (MNL) Stabilization by Lithium Defects as a Cathode Material for Sodium-Ion Batteries

A known strategy for improving the properties of layered oxide electrodes in sodium-ion batteries is the partial substitution of transition metals by Li. Herein, the role of Li as a defect and its impact on sodium storage in P2-Na_0.67Mn_0.6Ni_0.2Li_0.2O₂ is discussed. In tandem with electrochemical studies, the electronic and atomic structure are studied using solid-state NMR, operando XRD, and density functional theory (DFT). For the as-synthesized material, Li is located in comparable amounts within the sodium and the transition metal oxide (TMO) layers. Desodiation leads to a redistribution of Li ions within the crystal lattice. During charging, Li ions from the Na layer first migrate to the TMO layer before reversing their course at low Na contents. There is little change in the lattice parameters during charging/discharging, indicating stabilization of the P2 structure. This leads to a solid-solution type storage mechanism (sloping voltage profile) and hence excellent cycle life with a capacity of 110 mAh g^-1 after 100 cycles. In contrast, the Li-free compositions Na_0.67Mn_0.6Ni_0.4O₂ and Na_0.67Mn_0.8Ni_0.2O₂ show phase transitions and a stair-case voltage profile. The capacity is found to originate from mainly Ni³⁺/Ni⁴⁺ and O^2-/O^2-δ redox processes by DFT, although a small contribution from Mn⁴⁺/Mn⁵⁺ to the capacity cannot be excluded.     

Status of Mysis diluviana in Lake Ontario in 2013: Lower abundance but higher fecundity than in the 1990s

Mysis diluviana is a major component of prey fish diets in the Great Lakes, so annual production of M. diluviana is important for understanding and modeling energy flow through Great Lakes food webs. However, only three lake-wide measurements of M. diluviana annual production in Lake Ontario are currently available (1971, 1990, 1995). During 2013, lake-wide coverage of Lake Ontario was achieved during four periods from April to November. Annual mean density and biomass of M. diluviana in 2013 were 99?#/m² (SE: 8) and 318?mg?dw/m² (SE: 28) – approximately half of values observed in 1990s. M. diluviana comprised 13–30% of offshore zooplankton biomass in each period. Reproduction peaked in fall, with mean brood size of 32 embryos (range: 11–49), at least 10% larger than in 1990s. Generation time was two years from embryo to initial reproduction. Growth rates were 0.052?mm/d for the age-0 cohort and 0.027?mm/d for the age-1 cohort. Age-0 growth rate was significantly higher than in 1980s–90s (0.035?mm/d). Annual production in 2013 was 0.85?g?dw/m²/yr (SE: 0.03) which was 30–40% of values observed in 1990 and 1995 (2.23 and 2.53?g/m²/yr). Annual production to biomass ratio (P/B) in 2013 was 2.65?/yr which was 80–85% of values observed in 1990 and 1995 (3.24 and 3.11?/yr), but this difference was not statistically significant. Our results suggest that changes in annual production over time can be estimated using changes in biomass over time and a mean P/B ratio.     

In situ observation of synthesized nanoparticles in ultra-dilute aerosols via X-ray scattering

In-air epitaxy of nanostructures (Aerotaxy) has recently emerged as a viable route for fast, large-scale production. In this study, we use small-angle X-ray scattering to perform direct in-flight characterizations of the first step of this process, i.e., the engineered formation of Au and Pt aerosol nanoparticles by spark generation in a flow of N₂ gas. This represents a particular challenge for characterization because the particle density can be extremely low in controlled production. The particles produced are examined during production at operational pressures close to atmospheric conditions and exhibit a lognormal size distribution ranging from 5–100 nm. The Au and Pt particle production and detection are compared. We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding dominant physical properties, including the average particle diameter and sphericity, as influenced by particle sintering and the presence of aggregates. We observe highly sorted and sintered spherical Au nanoparticles at ultra-dilute concentrations (< 5 × 10⁵ particles/cm³) corresponding to a volume fraction below 3 × 10^–10, which is orders of magnitude below that of previously measured aerosols. We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis. Our study indicates that with high-intensity synchrotron beams and careful consideration of background removal, size and shape information can be obtained for extremely low particle concentrations with industrially relevant narrow size distributions.