Mathematical modeling of falling liquid film evaporation process

A mathematical model of evaporation process from a laminar falling liquid film on a vertical plate of constant temperature is presented. The model is developed with and without interfacial shear stress due to the vapor flow at the liquid film surface. The vapor pressure drop, vapor exit velocity and cooling rate are calculated for different liquid mass flow values. It is shown that lower liquid mass flow produces higher cooling rate. The results also show that the interfacial shear stress has a considerable negative effect on the cooling rate. It is proved that there exists an optimum distance between the plates, which gives the maximum volumetric cooling rate.     

Heat and Mass Transfer Analogy Studies of Binary Liquid Mixture in Comparison with Eteanol-n-Heptane Evaporating to Air

An expenmental and theoretical study of heat and mass transfer analogy and a comparison of that to a binary liquid mixture evaporation is presented. Common organic solvents, ethanol and n-heptane, were used to form an alcohol - hydrocarbon mixture. Studies were carried out in a horizontal rectangular channel having air flow velocities of 0.2 - 0.9 m/s. Heat transfer coefficients were measured with a copper plate resistor and mass transfer coefficients with a square pool. The heat and mass transfer analogy is presented for a system having two evaporating compounds with a fixed value of air flow and verified by measuring and comparing mass transfer coefficients for distilled water with air flow velocities of 0.2 - 0.9 mls. An illustrative example of the use of the theory for industrial ventilation is presented.     

Numerical investigation of 3-D constraint effects on brittle fracture in SE(B) and C(T) specimens

Specimen size and geometry effects on cleavage fracture of ferritic steels tested in the ductile-to-brittle transition region remain an important technological impediment in industrial applications of fracture mechanics and in the on-going development of consensus fracture testing standards. This investigation employs 3-D nonllinear finite element analyses to conduct an extensive parametric evaluation of crack front stress triaxiality for deep notch SE(B) and C(T) specimens and shallow notch SE(B) specimens, with and without side grooves. Crack front conditions are characterized in terms of J-Q trajectories and the constraint model for cleavage fracture toughness proposed previously by Dodds and Anderson. An extension of the toughness scaling model suggested here combines a revised in-plane constraint correction with an explicit thickness correction derived from extreme value statistics. The 3-D analyses provide effective thicknesses for use in the statistical correction which reflect the interaction of material flow properties and specimen aspect ratios, a/W and W/B, on the varying levels of stress triaxiality over the crack front. The 3-D computational results imply that a significantly less strict size/deformation limit, relative to the limit indicated by previous plane-strain computations, is needed to maintain small-scale yielding conditions at fracture by a stress-controlled, cleavage mechanism in deep notch SE(B) and C(T) speciments. Moreover, the analyses indicate that side grooves (20 percent) should have essentially no net effect on measured toughness values of such specimens. Additional new results made available from the 3-D analyses also include revised -plastic factors for use in experimental studies to convert measured work quantities to thickness average and maximum (local) J-values over the crack front. To estimate CTOD values, new m-factors are included for use in the expression 131-1.     

Towards computer game studies

It is relatively stress-free to write about computer games as nothing too much has been said yet, and almost anything goes. The situation is pretty much the same when it comes to writing about games and gaming in general. The sad fact with alarming cumulative consequences is that they are under-theorized; there are Huizinga, Caillois and Ehrmann of course, and libraries full of board game studies,in addition to game theory and bits and pieces of philosophy – most notably those of Wittgenstein – but they won't get us very far with computer games. So if there already is or soon will be a legitimate field for computer game studies, this field is also very open to intrusions and colonisations from the already organized scholarly tribes. Resisting and beating them is the goal of our first survival game in this paper, as what these emerging studies need is independence, or at least relative independence.     

An industry experiment on the effects of test-driven development on external quality and productivity

Existing empirical studies on test-driven development (TDD) report different conclusions about its effects on quality and productivity. Very few of those studies are experiments conducted with software professionals in industry. We aim to analyse the effects of TDD on the external quality of the work done and the productivity of developers in an industrial setting. We conducted an experiment with 24 professionals from three different sites of a software organization. We chose a repeated-measures design, and asked subjects to implement TDD and incremental test last development (ITLD) in two simple tasks and a realistic application close to real-life complexity. To analyse our findings, we applied a repeated-measures general linear model procedure and a linear mixed effects procedure. We did not observe a statistical difference between the quality of the work done by subjects in both treatments. We observed that the subjects are more productive when they implement TDD on a simple task compared to ITLD, but the productivity drops significantly when applying TDD to a complex brownfield task. So, the task complexity significantly obscured the effect of TDD. Further evidence is necessary to conclude whether TDD is better or worse than ITLD in terms of external quality and productivity in an industrial setting. We found that experimental factors such as selection of tasks could dominate the findings in TDD studies.     

Modelling of the lignin peroxidase LIII of Phlebia radiata: use of a sequence template generated from a 3-D structure

A model of the lignin peroxidase LIII of Phlebia radiata wasconstructed on the basis of the structure of cytochrome c peroxidase(CCP). Because of the low percentage of amino acid identitybetween the CCP and the lignin peroxidase LIII of Phlebia radiata,alignment of the sequences was based on the generation of atemplate from a knowledge of the 3-D structure of CCP and consensussequences of lignin peroxidases. This approach gave an alignmentin which all the insertions in the lignin peroxidase were placedat loop regions of CCP, with a 21.1% identity for these twoproteins. The model was constructed using this alignment andthe computer program COMPOSER, which assembles the model asa series of rigid fragments derived from CCP and other proteins.Manual intervention was required for some of the longer loopregions. The -helices forming the structural framework, andespecially the haem environment of CCP, are conserved in theLIII model and the core is close packed without holes. A possiblesite of the substrate oxidation at the haem edge of LIII isdiscussed.     

Atomic layer deposition of calcium oxide and calcium hafnium oxide films using calcium cyclopentadienyl precursor

Calcium oxide and calcium hafnium oxide thin films were grown by atomic layer deposition on borosilicate glass and silicon substrates in the temperature range of 205–300 °C. The calcium oxide films were grown from novel calcium cyclopentadienyl precursor and water. Calcium oxide films possessed refractive index 1.75–1.80. Calcium oxide films grown without Al₂O₃ capping layer occurred hygroscopic and converted to Ca(OH)₂ after exposure to air. As-deposited CaO films were (200)-oriented. CaO covered with Al₂O₃ capping layers contained relatively low amounts of hydrogen and re-oriented into (111) direction upon annealing at 900 °C. In order to examine the application of CaO in high-permittivity dielectric layers, mixtures of Ca and Hf oxides were grown by alternate CaO and HfO₂ growth cycles at 230 and 300 °C. HfCl₄ was used as a hafnium precursor. When grown at 230 °C, the films were amorphous with equal amounts of Ca and Hf constituents (15 at.%). These films crystallized upon annealing at 750 °C, showing X-ray diffraction peaks characteristic of hafnium-rich phases such as Ca₂Hf₇O₁₆ or Ca₆Hf₁₉O₄₄. At 300 °C, the relative Ca content remained below 8 at.%. The crystallized phase well matched with rhombohedral Ca₂Hf₇O₁₆. The dielectric films grown on Si(100) substrates possessed effective permittivity values in the range of 12.8–14.2.     

The use of (green field) biomass pretreatment liquor for fermentative butanol production and the catalytic oxidation of biobutanol

In this study, pretreatment liquor of acid-stored green and yellowish barley silage was used for fermentative acetone–butanol–ethanol (ABE) production. Further, the catalytic oxidation of biobutanol over Pt catalysts was studied to investigate the behaviour of butanol as a fuel in the combustion engine. After the hydrothermal treatment of green and yellowish barley silage followed by enzymatic hydrolysis, approximately 88% and 100% of the available sugars were recovered, respectively. Batch fermentations of pretreatment barley silage liquor, supplemented with gelatinised barley grain, showed good fermentability with total ABE concentrations of 9.0 g/L and 10.9 g/L. Butanol yields of 0.20, 0.17 and ABE yields of 0.28, 0.26 (g/g monosaccharide) were obtained, respectively. In catalytic activity measurements, the conversion of biobutanol became appreciable in the 120–140 °C range, whereas conversions greater than 95% were obtained over 200 °C. Selectivities were also high, although formation of by-products, such as butyraldehyde, was observed.