Carbonization and liquid—crystal (mesophase) development. 19. Co-carbonization of oxidized coals with model organic compounds

This study examines further the phenomena of the modification of coal carbonizations by organic additives. Anthracene, pyrene and chrysene modify the carbonization in a closed system of coking coals as observed from increases in the size of optical textures of resultant cokes. Weakly caking coals are unaffected. Chrysene is the most efficient modifier probably because of its lowest calculated free valence. The co-additives tetralin and hydrogenated anthracene oil further enhance the modification processes so obviating the necessity to use hydrogenated additives. Co-carbonizations of oxidized coking and caking coals with decacyclene are effective in removing the effects of mild oxidation. Increased rates of carbonization enhance the sizes of optical textures of resultant cokes.     

Thraustochytrid as a potential source of carotenoids

Thraustochytrids, marine protists whose dominant genera are Thraustochytrium and Schizochytrium, belong to the kingdom Chromista and are known as an industrial source of DHA. We describe here that thraustochytrid strain KH105, isolated as a DHA producer, also accumulates significant levels of β-carotene and xanthophylls including canthaxanthin and astaxanthin. A4-d cultivation using a medium composed of 10% glucose and less than 0.3% of nitrogen sources in a half-concentration of seawater gave an astaxanthin production up to 6.1 mg/L, and canthaxanthin content reached more than 10 mg/L under conditions where a higher concentration of nitrogen sources (6%) was employed. It might be advantageous in mass production systems for these carotenoids to be extracted readily by simply suspending the cells with organic solvents such as acetone and chloroform. Analyses on the morphological and life history features of the KH105 strain revealed that it belongs to the genus Schizochytrium. This particular species of thraustochytrids is thus considered to be a promising source of xanthophylls as well as DHA for use in the food industry.     

Correction of color information of a 3D model using a range intensity image

Most active optical range sensors record, simultaneously with the range image, the amount of light reflected at each measured surface location: this information forms what is called a range intensity image, also known as a reflectance image. This paper proposes a method that uses this type of image for the correction of the color information of a textured 3D model. This color information is usually obtained from color images acquired using a digital camera. The lighting condition for the color images are usually not controlled, thus this color information may not be accurate. On the other hand, the illumination condition for the range intensity image is known since it is obtained from a controlled lighting and observation configuration, as required for the purpose of active optical range measurement. The paper describes a method for combining the two sources of information, towards the goal of compensating for a reference range intensity image is first obtained by considering factors such as sensor properties, or distance and relative surface orientation of the measured surface. The color image of the corresponding surface portion is then corrected using this reference range intensity image. A B-spline interpolation technique is applied to reduce the noise of range intensity images. Finally, a method for the estimation of the illumination color is applied to compensate for the light source color. Experiments show the effectiveness of the correction method using range intensity images.     

Fabrication of X-rays mask with carbon membrane for diffraction gratings

We have produced diffraction gratings for obtaining high resolution X-ray phase imaging, such as X-ray Talbot interferometer. These diffraction gratings were required to have a fine, high accuracy, high aspect ratio structure. Therefore, we decided to use the X-rays lithography technique that used synchrotron radiation of the directivity for a manufacture process. The accuracy of the completed structure depends largely on the accuracy of the X-ray mask. In our group, a resin material is conventionally used for the membrane of large X-ray masks. However, X-ray masks comprising a resin membrane have the disadvantage that, after several cycles of X-ray exposure, they crease and sag due to X-ray-derived heat. As a substitute for the conventional resin membrane, we experimentally fabricated a new X-ray mask using a carbon wafer membrane. The newly fabricated X-ray mask was subjected to X-ray exposure experiment. We succeeded in making the structure body which was almost shape. And the experimental results verified that the new mask did not deteriorate even when used repeatedly, demonstrating that it was highly durable.     

Achieving homogeneity in a Cu–Zr alloy processed by high-pressure torsion

A copper alloy, Cu–0.1 %Zr, was subjected to severe plastic deformation at room temperature using quasi-constrained high-pressure torsion. Disks were strained through different numbers of revolutions up to a maximum of ten turns under an applied pressure of 6.0 GPa and then examined to evaluate the evolution in the Vickers microhardness, Hv, and the microstructure. The results show lower values of Hv in the center regions of the disks in the early stages of processing but a gradual evolution to a high degree of hardness homogeneity after five and ten turns. Under conditions of hardness homogeneity, the distributions of the grain boundary misorientations are essentially identical at the center and the periphery of the sample. Homogeneity was further confirmed by conducting tensile testing at elevated temperatures where similar stress–strain curves and similar elongations to failure were recorded after processing through five and ten turns of HPT.     

‘Lipase and protease production of dairy Penicillium sp. on milk‐protein‐based solid substrates’

The lipolytic and proteolytic activity of Penicillium camemberti PC TT033 and Penicillium roqueforti PR G3, cultured on the whey solids or simulated cheese media, were compared under several pH reaction conditions. Lipolytic activity was higher when both strains had been cultured on the whey medium than on the simulated cheese medium, whereas proteolytic activity was less influenced by the culture medium. The relationship between the reaction pH and these enzyme activities was dependent on the culture medium, which suggested that the expression level and balance of isozyme rely on the culture substrate.     

Molecular Design and Synthesis of a Novel Substrate for Assaying Lysozyme Activity

A novel substrate {Galβ1,4GlcNAcβ1,4GlcNAc-β-pNP [Gal(GlcNAc)₂-β-pNP]} for assaying lysozyme activity has been designed using docking simulations and enzymatic synthesis via β-1,4-galactosyltransferase-mediated transglycosylation from UDP-Gal as the donor to (GlcNAc)₂-β-pNP as the acceptor. Hydrolysis of the synthesized Gal(GlcNAc)₂-β-pNP and related compounds using hen egg-white lysozyme (HEWL) demonstrated that the substrate was specifically cleaved to Gal(GlcNAc)₂ and p-nitrophenol (pNP). A combination of kinetic studies and docking simulation was further conducted to elucidate the mode of substrate binding. The results demonstrate that Gal(GlcNAc)₂-β-pNP selectively binds to a subsite of lysozyme to liberate the Gal(GlcNAc)₂ and pNP products. The work therefore describes a new colorimetric method for quantifying lysozyme on the basis of the determination of pNP liberated from the substrate.     

Determining surface orientations of transparent objects based on polarization degrees in visible and infrared wavelengths

Techniques for modeling an object through observation are very important in object recognition and virtual reality. A wide variety of techniques have been developed for modeling objects with opaque surfaces, whereas less attention has been paid to objects with transparent surfaces. A transparent surface has only surface reflection; it has little body reflection. We present a new method for obtaining surface orientations of transparent surfaces through analysis of the degree of polarization in surface reflection and emission in visible and far-infrared wavelengths, respectively. This parameter, the polarization degree of reflected light at the visible wavelengths, is used for determining the surface orientation at a surface point. The polarization degree at visible wavelengths provides two possible solutions, and the proposed method uses the polarization degree at far-infrared wavelengths to resolve this ambiguity.