Influence of bearing ball recirculation on error motions of linear axes

For positioning systems utilizing linear guides and trucks with recirculating balls, a method is presented that uses the measured total error motions and the measured phase of ball loops within trucks to determine the influence of each ball loop on the error motions. The influence of ball recirculation on the error motions is estimated a priori via a least-squares solution based on data collected from a multitude of motion tests in which varying phases were measured by sensors integrated into the trucks. This method enables real-time estimation of performance degradations and identification of their sources.     

Archetypes of open-source business models

Electronic Markets - The open-source paradigm offers a plethora of opportunities for innovative business models (BMs) as the underlying codebase of the technology is accessible and extendable by...     

Konzept einer autarken elektrischen und thermischen Energieversorgung auf Basis von Photovoltaik

A photovoltaic system could supply a single-family house with electrical power, warm water, and room heat if the energy would be distributed over the year to suit the load profile. However, storage systems for this are not state of the art yet. A concrete example is used to estimate which parameters such a power storage system should have. A suitable electrochemical reaction system based on inorganic salt mixtures is proposed. The German Federal Ministry of Education and Research is currently funding the development of a world storage facility based on the same reaction system.     

Embedded Metal Oxide Plasmonics Using Local Plasma Oxidation of AZO for Planar Metasurfaces

New methods for achieving high-quality conducting oxide metasurfaces are of great importance for a range of emerging applications from infrared thermal control coatings to epsilon-near-zero nonlinear optics. This work demonstrates the viability of plasma patterning as a technique to selectively and locally modulate the carrier density in planar Al-doped ZnO (AZO) metasurfaces without any associated topographical surface profile. This technique stands in strong contrast to conventional physical patterning which results in nonplanar textured surfaces. The approach can open up a new route to form novel photonic devices with planar metasurfaces, for example, antireflective coatings and multi-layer devices. To demonstrate the performance of the carrier-modulated AZO metasurfaces, two types of devices are realized using the demonstrated plasma patterning. A metasurface optical solar reflector is shown to produce infrared emissivity equivalent to a conventional etched design. Second, a multiband metasurface is achieved by integrating a Au visible-range metasurface on top of the planar AZO infrared metasurface. Independent control of spectral bands without significant cross-talk between infrared and visible functionalities is achieved. Local carrier tuning of conducting oxide films offers a conceptually new approach for oxide-based photonics and nanoelectronics and opens up new routes for integrated planar metasurfaces in optical technology.     

Arduino-based slider setup for gas–liquid mass transfer investigations: Experiments and CFD simulations

The implementation of traditional sensors is a drawback when investigating mass transfer phenomena within microstructured devices, since they disturb the flow and reactor characteristics. An Arduino based slider setup is developed, which is equipped with a computer-vision system to track gas–liquid slug flow. This setup is combined with an optical analytical method allowing to compare experimental results against CFD simulations and investigate the entire lifetime of a single liquid slug with high spatial and temporal resolution. Volumetric mass transfer coefficients are measured and compared with data from literature and the mass transfer contribution of the liquid film is discussed.     

Effect of Constant‐Rate Reduction on the Performance of a Ternary Cu/ZnO/Al2O3 Catalyst in Methanol Synthesis

A multi‐functional flow set‐up was developed for the rate‐ and temperature‐controlled reduction of copper catalysts, their application in high‐pressure methanol synthesis and the determination of the copper surface area by N₂O frontal chromatography. The influence of constant‐rate reduction on the catalytic properties of a ternary Cu/ZnO/Al₂O₃ catalyst was investigated. The temperature during the constant‐rate reduction was found to decrease, indicating autocatalytic kinetics, but no significant catalytic effect of the milder reduction conditions was observed compared with a slow linear heating ramp.     

Microbial partitioning to settleable particles in stormwater

The degree to which microbes in the water column associate with settleable particles has important implications for microbial transport in receiving waters, as well as for microbial removal via sedimentation (i.e. detention basins). The partitioning behavior of several bacterial, protozoan and viral indicator organisms is explored in three urban streams under both storm and dry weather conditions. The fraction of organisms associated with settleable particles in stormwater is estimated through use of a centrifugation technique which is calibrated using suspensions of standard particles (e.g., glass, latex). The fraction of organisms associated with settleable particles varies by type of microbe, and the partitioning behavior of each organism generally changes between dry weather and storm conditions. Bacterial indicator organisms (fecal coliforms, Escherichia coli, enterococci) exhibited relatively consistent behavior, with an average of 20-35% of organisms associated with these particles in background samples and 30-55% in storm samples. Clostridium perfringens spores exhibited the highest average level of particle association, with storm values varying from 50% to 70%. Results related to total coliphage partitioning were more variable, with 20-60% associated with particles during storms. These estimates should be valuable in surface water quality modeling efforts, many of which currently assume that all microbes exist as free (unattached) organisms.     

Processing behavior and mechanical properties of autopolymerizing hypoallergenic denture base polymers

Driven by the phenomenon of increasing irritations and allergic reactions of dental prosthesis carriers preferably due to residual methyl methacrylate monomer in conventional dental materials, autopolymerizing hypoallergenic denture base polymers were prepared as two‐component materials in the shape of paste/paste‐ or powder/liquid systems. The processing behavior of these materials was investigated regarding the processing and solidification times also in dependence on the polymerization catalyst concentration, whereas the whole processing and curing characteristics and the final polymer properties were evaluated by dynamic mechanical analysis in shear mode in the temperature range from ?145°C to 200°C. The mechanical properties of the hypoallergenic denture base polymers were validated regarding stiffness (flexural modulus E') and fracture toughness (maximum factor of loading intensity , total work of fracture ) and the effects of monomer composition, kind of resin powder, impact modification by the liquid component, and water immersion on these properties were investigated. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41378.